MVH63VC10RMH63TP Equivalent & Substitute Parts

Part Overview

The MVH63VC10RMH63TP is a 10 µF, 63 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Chemi-Con. This component is classified as obsolete, indicating discontinuation from the manufacturer. Identification of equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing production or repair requirements for applications utilizing this capacitor specification.

Substiute Parts

MVH63VC10RMH63TP

Chemi-ConIn Stock: 782MVH63VC10RMH63TP Datasheet

Current PartRFQ

EMVH630ARA100MH63G

Chemi-ConIn Stock: 862EMVH630ARA100MH63G Datasheet

SimilarRFQ

EEE-TG1J100P

Panasonic Electronic ComponentsIn Stock: 2400EEE-TG1J100P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MVH63VC10RMH63TP are identified based on strict electrical and mechanical parameter matching within the aluminum electrolytic capacitor category. The substitution logic is based on the following critical parameters:

Electrical Parameters:

• Capacitance value: 10 µF (exact match required)
• Voltage rating: 63 V (exact match required)
• Tolerance: ±20% (exact match required)
• Operating temperature range: -40°C to 125°C (exact match required)
• Lifetime specification: 1000 Hrs @ 125°C (exact match required)

Mechanical Parameters:

• Package type: Radial, Can - SMD (exact match required)
• Mounting type: Surface Mount (exact match required)
• Case diameter: 8.00 mm (exact match required)
• Case height: 6.30 mm maximum seated height (exact match or tighter required)
• Surface mount land size: 8.30 mm × 8.30 mm (exact match required)

Environmental Parameters:

• Polarization: Polar (exact match required)
• Moisture sensitivity level: 1 - Unlimited (exact match or better required)

Substitute parts must satisfy all critical parameters to ensure functional and physical compatibility with the original design without requiring PCB modifications or circuit redesign.

Parameter Comparison

Engineering Selection Recommendations

EMVH630ARA100MH63G (Chemi-Con Alchip™ - MVH Series)

This substitute part maintains manufacturer continuity within the Chemi-Con product line and is classified as active product status. It satisfies all critical electrical and mechanical parameters. The EMVH630ARA100MH63G achieves ROHS3 compliance, addressing regulatory requirements that the obsolete MVH63VC10RMH63TP does not meet. The higher ripple current rating (60 mA @ 100 kHz versus 42 mA @ 100 kHz) provides additional performance margin. This part is suitable for applications where Chemi-Con component continuity is preferred and regulatory compliance is required.

EEE-TG1J100P (Panasonic Electronic Components TG Series)

This substitute part is manufactured by Panasonic Electronic Components and is classified as active product status. It satisfies all critical electrical and mechanical parameters with ROHS3 compliance. The EEE-TG1J100P carries AEC-Q200 automotive qualification, indicating suitability for automotive-grade applications. The case height is 6.20 mm, which is 0.10 mm lower than the original specification, providing improved clearance margin. The ripple current rating (55 mA @ 100 kHz) exceeds the original specification. This part is suitable for applications requiring automotive-grade qualification and multi-source component strategy.

Both substitute parts are currently in active production status, ensuring long-term supply availability compared to the obsolete original part.

Frequently Asked Questions (FAQ)

Q: Can the EMVH630ARA100MH63G or EEE-TG1J100P be used as direct replacements for the MVH63VC10RMH63TP without PCB modification?

A: Yes. Both substitute parts match the critical mechanical parameters: 8.00 mm case diameter, 6.30 mm maximum case height (EEE-TG1J100P is 6.20 mm, which is compatible), and 8.30 × 8.30 mm land size. No PCB footprint changes are required.

Q: What is the difference in ESR between the original part and the substitutes?

A: The MVH63VC10RMH63TP specifies 2.3 Ω @ 120 Hz. The EMVH630ARA100MH63G specifies 2.0 Ω @ 100 kHz, and the EEE-TG1J100P specifies 2.2 Ω @ 100 kHz. ESR values are measured at different frequencies; direct comparison requires frequency normalization. Both substitutes provide comparable or lower ESR performance.

Q: Are there compliance differences between the original part and substitutes?

A: Yes. The MVH63VC10RMH63TP is RoHS non-compliant. Both EMVH630ARA100MH63G and EEE-TG1J100P are ROHS3 compliant. The EEE-TG1J100P additionally carries AEC-Q200 automotive qualification. For new designs or applications with regulatory requirements, the compliant substitutes are required.

Q: What is the inventory status of these parts?

A: The MVH63VC10RMH63TP has 689 pieces in stock but is obsolete. The EMVH630ARA100MH63G has 780 pieces in stock and is active. The EEE-TG1J100P has 2342 pieces in stock and is active. Active status parts provide superior long-term supply assurance.

Q: Can I use either substitute interchangeably, or should I select one over the other?

A: Both substitutes satisfy all critical electrical and mechanical parameters and are functionally interchangeable. Selection depends on application requirements: choose EMVH630ARA100MH63G for Chemi-Con component continuity; choose EEE-TG1J100P for automotive-grade qualification or multi-source strategy.

Q: What is the ripple current difference, and does it matter?

A: The MVH63VC10RMH63TP specifies 42 mA @ 100 kHz. The EMVH630ARA100MH63G specifies 60 mA @ 100 kHz, and the EEE-TG1J100P specifies 55 mA @ 100 kHz. Both substitutes have higher ripple current ratings, providing additional performance margin for high-frequency applications.

Q: Are the operating temperature ranges identical?

A: Yes. All three parts specify -40°C to 125°C operating temperature range and 1000 hours lifetime @ 125°C. Thermal performance is equivalent.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the component has unlimited shelf life without moisture bake-out requirements. All three parts carry this rating, indicating identical moisture handling characteristics.