MVH50VC22RMH63TP Equivalent & Substitute Parts

Part Overview

The MVH50VC22RMH63TP is a 22 µF, 50 V aluminum electrolytic capacitor manufactured by Chemi-Con in the MVH series. This surface mount radial can capacitor is designed for general purpose applications with a rated lifetime of 1000 hours at 125°C. The part is classified as obsolete, necessitating identification of equivalent and substitute components that maintain electrical and mechanical compatibility while offering active product status and improved compliance characteristics.

Substiute Parts

MVH50VC22RMH63TP

Chemi-ConIn Stock: 1132MVH50VC22RMH63TP Datasheet

Current PartRFQ

EMVH500ARA220MH63G

Chemi-ConIn Stock: 5698EMVH500ARA220MH63G Datasheet

SimilarRFQ

EDT226M050A9LAA

KEMETIn Stock: 789EDT226M050A9LAA Datasheet

DirectRFQ

EDT226M050S9LAA

KEMETIn Stock: 20120EDT226M050S9LAA Datasheet

DirectRFQ

EEE-TG1H220P

Panasonic Electronic ComponentsIn Stock: 5937EEE-TG1H220P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MVH50VC22RMH63TP is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance: 22 µF (exact match required)
• Tolerance: ±20% (exact match required)
• Voltage Rating: 50 V (exact match required)
• Operating Temperature Range: -40°C ~ 125°C (exact match required)
• Lifetime: 1000 Hrs @ 125°C (exact match required)
• Polarization: Polar (exact match required)

Mechanical Parameters:

• Mounting Type: Surface Mount (exact match required)
• Package / Case: Radial, Can - SMD (exact match required)
• Size / Dimension: 0.315" Dia (8.00mm) (exact match required)
• Surface Mount Land Size: 0.327" L x 0.327" W (8.30mm x 8.30mm) (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

All identified substitute parts meet these criteria. Variations in ESR (Equivalent Series Resistance), ripple current ratings, and height within tolerance ranges do not disqualify substitution when all primary parameters align.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: EDT226M050S9LAA

The EDT226M050S9LAA from KEMET is the preferred substitute for the obsolete MVH50VC22RMH63TP. This part meets all electrical and mechanical equivalence criteria and offers the following advantages:

• Active product status with established supply chain
• ROHS3 compliance
• AEC-Q200 automotive qualification rating
• Highest inventory availability (20,059 pcs in stock)
• Suitable for both general purpose and automotive applications

Secondary Recommendation: EMVH500ARA220MH63G

The EMVH500ARA220MH63G from Chemi-Con (Alchip™ MVH series) provides continuity within the original manufacturer's product line. This part offers:

• Active product status
• ROHS3 compliance
• Automotive application qualification
• Improved ESR performance (1.6Ohm @ 100kHz vs. 2.3Ohm @ 120Hz)
• Adequate inventory availability (5,677 pcs in stock)

Tertiary Recommendation: EEE-TG1H220P

The EEE-TG1H220P from Panasonic Electronic Components is an alternative substitute offering:

• Active product status
• ROHS3 compliance
• AEC-Q200 automotive qualification
• Lowest seated height (0.244" / 6.20mm)
• Adequate inventory availability (5,831 pcs in stock)

Alternative Recommendation: EDT226M050A9LAA

The EDT226M050A9LAA from KEMET is functionally equivalent but with lower inventory availability (753 pcs in stock). This part is suitable when EDT226M050S9LAA is unavailable.

All four substitute parts are electrically and mechanically compatible with the MVH50VC22RMH63TP. Selection should be based on supply chain availability, application requirements (general purpose vs. automotive), and compliance mandates specific to the end application.

Frequently Asked Questions (FAQ)

Q: Can the MVH50VC22RMH63TP be directly replaced with any of these substitute parts?

A: Yes. All identified substitute parts meet the critical electrical and mechanical parameters required for direct substitution: 22 µF capacitance, ±20% tolerance, 50 V rating, -40°C to 125°C operating range, 1000 hour lifetime at 125°C, surface mount radial can package, and 8.00mm diameter with 8.30mm x 8.30mm land size.

Q: What is the significance of the height variation between substitute parts?

A: The seated height varies slightly among substitutes: MVH50VC22RMH63TP and EMVH500ARA220MH63G are 0.248" (6.30mm), EDT226M050A9LAA and EDT226M050S9LAA are 0.256" (6.50mm), and EEE-TG1H220P is 0.244" (6.20mm). These variations remain within acceptable mechanical tolerances for surface mount assembly. Height selection should be verified against specific PCB clearance requirements.

Q: Why is the MVH50VC22RMH63TP obsolete?

A: The MVH50VC22RMH63TP is classified as obsolete by the manufacturer. The substitute parts listed represent active alternatives from Chemi-Con, KEMET, and Panasonic that maintain full electrical and mechanical compatibility while offering current product status and improved compliance certifications.

Q: What is the difference between general purpose and automotive-rated substitutes?

A: EDT226M050S9LAA and EEE-TG1H220P carry AEC-Q200 automotive qualification ratings, indicating compliance with automotive industry reliability and testing standards. EMVH500ARA220MH63G is qualified for automotive applications. EDT226M050A9LAA is designated for general purpose use. Selection depends on whether the end application requires automotive-grade certification.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All four substitute parts are ROHS3 compliant. The original MVH50VC22RMH63TP is RoHS non-compliant. If RoHS compliance is a requirement for your application, any of the substitute parts will satisfy this mandate.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: All parts, including the original and all substitutes, have MSL 1 (Unlimited). This indicates no moisture sensitivity restrictions and no special storage or handling requirements prior to assembly.

Q: Which substitute offers the best ESR performance?

A: EMVH500ARA220MH63G and EEE-TG1H220P both specify 1.6Ohm @ 100kHz ESR, representing improved performance compared to the original MVH50VC22RMH63TP at 2.3Ohm @ 120Hz. EDT226M050A9LAA and EDT226M050S9LAA do not specify ESR values in the provided data.

Q: Can I use these substitutes in high-ripple-current applications?

A: Ripple current ratings vary among substitutes. EDT226M050A9LAA and EDT226M050S9LAA specify 107.143 mA @ 100 kHz, while EMVH500ARA220MH63G specifies 83 mA @ 100 kHz and EEE-TG1H220P specifies 80 mA @ 100 kHz. Application-specific ripple current requirements should be matched against these ratings.

Q: What packaging options are available for these substitutes?

A: All substitute parts are supplied in Tape & Reel (TR) packaging, suitable for automated assembly processes. The original MVH50VC22RMH63TP packaging format is not specified in the provided data.