MVH35VC101MJ10TP Equivalent & Substitute Parts

Part Overview

The MVH35VC101MJ10TP is a 100 µF, 35 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Chemi-Con. This component is classified as obsolete product status. The part operates across a temperature range of -40°C to 125°C with a rated lifetime of 2000 hours at 125°C. Due to its obsolete status, equivalent and substitute parts from active manufacturers are necessary for ongoing production requirements and design continuity.

Key Parameters

Parameter	Value
Capacitance	100 µF
Voltage Rating	35 V
Tolerance	±20%
ESR @ 120Hz	700 mOhm
Lifetime @ 125°C	2000 Hours
Operating Temperature Range	-40°C to 125°C
Ripple Current @ 100 kHz	151 mA
Package Type	Radial, Can - SMD
Size / Dimension	0.394" Dia (10.00 mm)
Height - Seated (Max)	0.394" (10.00 mm)
Surface Mount Land Size	0.406" L x 0.406" W (10.30 mm x 10.30 mm)
Mounting Type	Surface Mount
Polarization	Polar
RoHS Status	RoHS Non-Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the MVH35VC101MJ10TP is determined by the following critical parameters:

Primary Matching Criteria:

Capacitance: 100 µF (exact match required)
Voltage Rating: 35 V minimum (equal or higher voltage acceptable)
Tolerance: ±20% (standard tolerance)
Package Type: Radial, Can - SMD (physical compatibility)
Mounting Type: Surface Mount (PCB assembly compatibility)
Surface Mount Land Size: 0.406" L x 0.406" W (10.30 mm x 10.30 mm) (footprint compatibility)
Operating Temperature Range: -40°C to 125°C minimum (thermal compatibility)
Polarization: Polar (electrical polarity requirement)

Secondary Performance Criteria:

ESR (Equivalent Series Resistance): Lower values indicate improved performance
Lifetime @ Temperature: 2000 hours or greater at 125°C
Ripple Current Capability: 151 mA @ 100 kHz or greater
RoHS Compliance: Active substitutes are ROHS3 compliant
Product Status: Active status preferred for long-term availability

Substitute parts are grouped into two categories: direct equivalents (matching 35 V rating) and upgrades (higher voltage ratings with enhanced performance characteristics).

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	ESR	Lifetime @ 125°C	Ripple Current @ 100 kHz	Height (Max)	Product Status	RoHS Status
MVH35VC101MJ10TP	Chemi-Con	100 µF	35 V	700 mOhm @ 120Hz	2000 Hrs	151 mA	0.394" (10.00 mm)	Obsolete	Non-Compliant
EMHB350ARA101MJA0G	Chemi-Con	100 µF	35 V	200 mOhm @ 400kHz	2000 Hrs	330 mA	0.413" (10.50 mm)	Active	ROHS3 Compliant
UCJ1V101MCL1GS	Nichicon	100 µF	35 V	1.5 Ohm	2000 Hrs	400 mA	0.413" (10.50 mm)	Active	ROHS3 Compliant
35THV100M10X10.5	Rubycon	100 µF	35 V	200 mOhm @ 100Hz	3000 Hrs	500 mA	0.413" (10.50 mm)	Active	ROHS3 Compliant
EEE-TK1V101P	Panasonic	100 µF	35 V	200 mOhm @ 100kHz	3000 Hrs	270 mA	0.402" (10.20 mm)	Active	ROHS3 Compliant
50THV100M10X10.5	Rubycon	100 µF	50 V	250 mOhm @ 100kHz	3000 Hrs	350 mA	0.413" (10.50 mm)	Active	ROHS3 Compliant
EDT107M050S9PAA	KEMET	100 µF	50 V	Not Specified	2000 Hrs	257.143 mA	0.413" (10.50 mm)	Active	ROHS3 Compliant
EEE-TG1H101UP	Panasonic	100 µF	50 V	500 mOhm @ 100kHz	2000 Hrs	221 mA	0.402" (10.20 mm)	Active	ROHS3 Compliant
EEE-TG1J101UP	Panasonic	100 µF	63 V	800 mOhm @ 100kHz	2000 Hrs	150 mA	0.402" (10.20 mm)	Active	ROHS3 Compliant
UCX1H101MCS1GS	Nichicon	100 µF	50 V	200 mOhm	2000 Hrs @ 135°C	500 mA	0.413" (10.50 mm)	Not For New Designs	ROHS3 Compliant
UCZ1H101MCL1GS	Nichicon	100 µF	50 V	200 mOhm	3000 Hrs	500 mA	0.413" (10.50 mm)	Not For New Designs	ROHS3 Compliant

Engineering Selection Recommendations

Direct Equivalents (35 V Rating):

EMHB350ARA101MJA0G (Chemi-Con Alchip™-MHB series) provides direct voltage compatibility with improved ESR performance (200 mOhm @ 400kHz versus 700 mOhm @ 120Hz). This part is ROHS3 compliant and carries AEC-Q200 automotive qualification. Height increases from 10.00 mm to 10.50 mm; verify PCB clearance before selection.

UCJ1V101MCL1GS (Nichicon UCJ series) offers the lowest ESR specification at 1.5 Ohm with superior ripple current handling (400 mA @ 100 kHz). This part is ROHS3 compliant and maintains 35 V rating. Height is 10.50 mm.

35THV100M10X10.5 (Rubycon THV series) provides extended lifetime (3000 hours @ 125°C versus 2000 hours) with significantly improved ripple current capability (500 mA @ 100 kHz). AEC-Q200 rated for automotive applications. Height is 10.50 mm.

EEE-TK1V101P (Panasonic TK series) delivers 3000-hour lifetime at 35 V with 200 mOhm ESR @ 100kHz. ROHS3 compliant. Height is 10.20 mm, providing the smallest vertical profile among 35 V options.

Upgrade Options (Higher Voltage Rating):

50THV100M10X10.5 (Rubycon THV series) upgrades voltage to 50 V with 3000-hour lifetime and 500 mA ripple current @ 100 kHz. AEC-Q200 rated. Suitable for applications requiring voltage margin or higher system voltage tolerance.

EDT107M050S9PAA (KEMET EDT series) provides 50 V rating with AEC-Q200 automotive qualification. 2000-hour lifetime at 125°C. ESR specification not provided in datasheet.

EEE-TG1H101UP (Panasonic TG series) offers 50 V upgrade with AEC-Q200 rating and 2000-hour lifetime. 500 mOhm ESR @ 100kHz. Height is 10.20 mm.

EEE-TG1J101UP (Panasonic TG series) provides maximum voltage upgrade to 63 V with AEC-Q200 qualification. 2000-hour lifetime. Note: Ripple current (150 mA @ 100 kHz) is lower than main part specification; verify application requirements.

Not Recommended for New Designs:

UCX1H101MCS1GS and UCZ1H101MCL1GS (Nichicon UCX and UCZ series) carry "Not For New Designs" product status. While ROHS3 compliant and offering 50 V rating with 200 mOhm ESR, these parts should not be selected for new product development.

Frequently Asked Questions (FAQ)

Q: Can I use a 50 V rated capacitor in place of the 35 V MVH35VC101MJ10TP?

A: Yes. Higher voltage-rated capacitors are electrically compatible with lower voltage applications. A 50 V capacitor will function correctly in a 35 V circuit. However, verify that the physical dimensions (particularly height) do not exceed PCB clearance constraints. Most 50 V substitutes have 10.50 mm height versus the original 10.00 mm.

Q: What is the significance of ESR (Equivalent Series Resistance) in capacitor substitution?

A: ESR directly affects capacitor performance in ripple current applications and high-frequency circuits. Lower ESR values reduce heat generation and improve voltage stability. The MVH35VC101MJ10TP has 700 mOhm ESR @ 120Hz. Direct substitutes offer 200 mOhm or lower, providing superior performance. However, ESR specifications must be measured at comparable frequencies for accurate comparison.

Q: Does the height difference between 10.00 mm and 10.50 mm matter?

A: Yes, if PCB design includes height constraints or component stacking. The original part is 10.00 mm seated height. Most active substitutes are 10.50 mm. Panasonic TG and TK series parts are 10.20 mm, offering a compromise. Verify available clearance above the capacitor location before finalizing part selection.

Q: Why is the original MVH35VC101MJ10TP obsolete?

A: Chemi-Con discontinued this part in favor of newer series with improved performance characteristics. The Alchip™-MHB series (EMHB350ARA101MJA0G) represents the manufacturer's current equivalent offering with better ESR performance and RoHS compliance.

Q: Are all substitute parts RoHS compliant?

A: All active substitute parts listed are ROHS3 compliant. The original MVH35VC101MJ10TP is RoHS non-compliant. If RoHS compliance is a design requirement, any active substitute satisfies this criterion.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive electronics qualification standard. Parts carrying this rating have passed reliability testing for automotive applications, including thermal cycling, vibration, and humidity resistance. EMHB350ARA101MJA0G, 35THV100M10X10.5, 50THV100M10X10.5, EDT107M050S9PAA, EEE-TG1H101UP, and EEE-TG1J101UP all carry AEC-Q200 qualification.

Q: Can I substitute based on capacitance and voltage alone?

A: No. While capacitance and voltage are primary matching criteria, physical dimensions, ESR characteristics, ripple current capability, and lifetime specifications must also be verified. The surface mount land size (10.30 mm x 10.30 mm) is identical across all listed parts, but seated height varies from 10.00 mm to 10.50 mm.

Q: What is the difference between "Direct" and "Upgrade" substitutes?

A: Direct substitutes maintain the original 35 V voltage rating. Upgrade substitutes increase the voltage rating to 50 V or 63 V, providing additional voltage margin and typically improved performance characteristics. Upgrades are electrically compatible but should be selected only when the higher voltage rating provides system benefit.

Q: Why do some parts have "Not For New Designs" status?

A: This designation indicates the manufacturer is phasing out the product line. While currently available in inventory, these parts should not be selected for new product development to ensure long-term supply continuity. UCX1H101MCS1GS and UCZ1H101MCL1GS carry this status.

Q: How do I verify physical compatibility before ordering?

A: Confirm three parameters: (1) Surface Mount Land Size: 0.406" L x 0.406" W (10.30 mm x 10.30 mm) - identical for all parts; (2) Seated Height: verify available clearance above component location; (3) Mounting Type: all parts are Surface Mount compatible with standard SMD assembly equipment.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message