Equivalent & Substitute Parts for MVE63VC101MJ10TP

Part Overview

The MVE63VC101MJ10TP is a 100 µF, 63 V aluminum electrolytic capacitor manufactured by Chemi-Con in the MVE series. This surface mount radial can capacitor is designed for general purpose applications with a rated lifetime of 2000 hours at 105°C. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Key Parameters

Parameter	Value	Unit
Capacitance	100	µF
Tolerance	±20%	—
Voltage - Rated	63	V
ESR @ 120Hz	1.989	Ohm
Lifetime @ Temperature	2000 Hrs @ 105°C	—
Operating Temperature Range	-40°C to 105°C	—
Ripple Current @ 120 Hz	310	mA
Case Size	0.394" Dia (10.00mm)	—
Height - Seated (Max)	0.394" (10.00mm)	—
Surface Mount Land Size	0.406" L x 0.406" W (10.30mm x 10.30mm)	—
Mounting Type	Surface Mount	—
Package / Case	Radial, Can - SMD	—
Polarization	Polar	—
RoHS Status	RoHS non-compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the MVE63VC101MJ10TP is determined by strict equivalence in the following electrical and mechanical parameters:

Critical Equivalence Parameters:

Capacitance: 100 µF (exact match required)
Voltage Rating: 63 V (exact match required)
Tolerance: ±20% (exact match required)
Package / Case: Radial, Can - SMD (exact match required)
Mounting Type: Surface Mount (exact match required)
Polarization: Polar (exact match required)
Case Diameter: 0.394" (10.00mm) (exact match required)
Surface Mount Land Size: 0.406" L x 0.406" W (10.30mm x 10.30mm) (exact match required)

Allowable Variations:

Height - Seated (Max): 0.394" to 0.413" (10.00mm to 10.50mm) — minor height variations are acceptable within PCB assembly constraints
Operating Temperature Range: May extend beyond -40°C to 105°C (e.g., -55°C to 105°C or -40°C to 125°C)
Lifetime @ Temperature: 2000 Hrs @ 105°C or higher temperature ratings (e.g., 2000 Hrs @ 125°C)
Ripple Current: Values at or above 310 mA @ 120 Hz are acceptable
ESR: Lower values are acceptable; higher values require verification
RoHS Status: Active parts are ROHS3 compliant; obsolete part is non-compliant
Product Status: Active parts are preferred over obsolete status
Ratings: AEC-Q200 automotive qualification is a beneficial addition but not required for general purpose applications

Substitute parts are grouped into two categories: Direct Manufacturer Equivalents (same electrical performance, active status) and Parametric Equivalents (same core parameters with minor variations in height or temperature rating).

Parameter Comparison

Part Number	Manufacturer	Capacitance (µF)	Voltage (V)	Tolerance	Height Max (mm)	Operating Temp (°C)	Lifetime @ Temp	Ripple Current @ 120Hz (mA)	RoHS Status	Product Status	Ratings
MVE63VC101MJ10TP	Chemi-Con	100	63	±20%	10.00	-40 to 105	2000 Hrs @ 105°C	310	Non-compliant	Obsolete	—
EMZA630ARA101MJA0G	Chemi-Con	100	63	±20%	10.50	-55 to 105	2000 Hrs @ 105°C	160	ROHS3 Compliant	Active	AEC-Q200
EMVE630ARA101MJA0G	Chemi-Con	100	63	±20%	10.00	-40 to 105	2000 Hrs @ 105°C	310	ROHS3 Compliant	Active	—
63SGV100M10X10.5	Rubycon	100	63	±20%	10.50	-40 to 105	2000 Hrs @ 105°C	—	ROHS3 Compliant	Active	AEC-Q200
AFK107M63G24T-F	Cornell Dubilier Electronics (CDE)	100	63	±20%	10.50	-55 to 105	2000 Hrs @ 105°C	300	ROHS3 Compliant	Active	AEC-Q200
EDH107M063S9PAA	KEMET	100	63	±20%	10.50	-40 to 105	2000 Hrs @ 105°C	340	ROHS3 Compliant	Active	AEC-Q200
EEE-FK1J101P	Panasonic Electronic Components	100	63	±20%	10.50	-55 to 105	2000 Hrs @ 105°C	300	ROHS3 Compliant	Active	AEC-Q200
EEV107M063A9PAA	KEMET	100	63	±20%	10.50	-55 to 105	2000 Hrs @ 105°C	280	ROHS3 Compliant	Active	—
UCD1J101MNL1GS	Nichicon	100	63	±20%	10.50	-55 to 105	2000 Hrs @ 105°C	200	ROHS3 Compliant	Active	AEC-Q200
UUX1J101MNL1GS	Nichicon	100	63	±20%	10.50	-55 to 105	2000 Hrs @ 105°C	320	ROHS3 Compliant	Active	—
EEE-TG1J101UP	Panasonic Electronic Components	100	63	±20%	10.20	-40 to 125	2000 Hrs @ 125°C	97.5	ROHS3 Compliant	Active	AEC-Q200

Engineering Selection Recommendations

Primary Recommendation: EMVE630ARA101MJA0G (Chemi-Con)

The EMVE630ARA101MJA0G is the parametric equivalent within the Chemi-Con Alchip™ MVE series. This part maintains identical electrical performance (100 µF, 63 V, ±20%, 310 mA ripple current @ 120 Hz) and mechanical dimensions (10.00mm height) as the obsolete MVE63VC101MJ10TP. The part is active, ROHS3 compliant, and available in high inventory (16,539 pcs). This selection eliminates design changes and provides direct compatibility with existing PCB layouts.

Secondary Recommendations for Active Inventory:

AFK107M63G24T-F (Cornell Dubilier Electronics) — Active status, AEC-Q200 rated, 147,234 pcs in stock, extended temperature range (-55°C to 105°C), 300 mA ripple current @ 120 Hz. Height increases to 10.50mm; verify PCB clearance.
EEE-FK1J101P (Panasonic Electronic Components) — Active status, AEC-Q200 rated, 19,143 pcs in stock, extended temperature range (-55°C to 105°C), 300 mA ripple current @ 120 Hz, 350 mOhms impedance. Height increases to 10.50mm.
UUX1J101MNL1GS (Nichicon) — Active status, 3,689 pcs in stock, extended temperature range (-55°C to 105°C), 320 mA ripple current @ 120 Hz. Height increases to 10.50mm.

Upgrade Option: EEE-TG1J101UP (Panasonic Electronic Components)

The EEE-TG1J101UP offers enhanced thermal performance with 2000 hours lifetime at 125°C (versus 105°C for the original part) and extended operating temperature to 125°C. This part is AEC-Q200 rated and ROHS3 compliant. Height is 10.20mm (within acceptable range). Ripple current is reduced to 97.5 mA @ 120 Hz; verify application requirements before selection.

Compliance Considerations:

All recommended active substitutes are ROHS3 compliant, addressing the non-compliant status of the obsolete MVE63VC101MJ10TP. Parts with AEC-Q200 ratings (EMZA630ARA101MJA0G, 63SGV100M10X10.5, AFK107M63G24T-F, EDH107M063S9PAA, EEE-FK1J101P, UCD1J101MNL1GS, EEE-TG1J101UP) are qualified for automotive applications and provide additional reliability assurance.

Frequently Asked Questions (FAQ)

Q1: Can I use a substitute part with a height of 10.50mm instead of 10.00mm?

A: Yes. The height variation from 10.00mm to 10.50mm (0.50mm increase) is within acceptable mechanical tolerance for surface mount assembly. Verify that the PCB layout provides adequate clearance above the capacitor to accommodate the taller component. This is a minor variation that does not affect electrical performance.

Q2: What is the difference between a "Direct Manufacturer Equivalent" and a "Parametric Equivalent"?

A: A Direct Manufacturer Equivalent (such as EMZA630ARA101MJA0G) is an active part from the same manufacturer (Chemi-Con) with identical electrical specifications and the same series designation. A Parametric Equivalent (such as EMVE630ARA101MJA0G) meets all critical electrical and mechanical parameters but may be from a different manufacturer or series. Both are valid substitutes; the choice depends on supply chain preference and inventory availability.

Q3: Why do some substitute parts have lower ripple current ratings than the original MVE63VC101MJ10TP?

A: Ripple current capacity varies by manufacturer design and thermal management. The original part specifies 310 mA @ 120 Hz. Substitute parts with lower ripple current ratings (such as UCD1J101MNL1GS at 200 mA @ 120 Hz) are still valid substitutes if the application does not require the full 310 mA ripple current capacity. Verify the actual ripple current requirement in your circuit before selecting a part with reduced ripple current rating.

Q4: Is AEC-Q200 certification required for my application?

A: AEC-Q200 certification is required only for automotive applications. For general purpose applications, parts without AEC-Q200 rating (such as EMVE630ARA101MJA0G, EEV107M063A9PAA, or UUX1J101MNL1GS) are acceptable. If your application is automotive or requires automotive-grade reliability, select a part with AEC-Q200 rating.

Q5: Can I use the EEE-TG1J101UP upgrade part as a direct replacement?

A: The EEE-TG1J101UP is mechanically compatible (10.20mm height is within acceptable range) and electrically equivalent (100 µF, 63 V, ±20%). However, the ripple current is significantly reduced to 97.5 mA @ 120 Hz compared to the original 310 mA @ 120 Hz. Use this upgrade only if your circuit does not require high ripple current capacity. The benefit is enhanced thermal performance (2000 Hrs @ 125°C) and extended operating temperature range (-40°C to 125°C).

Q6: What does "REACH Affected" or "REACH Unaffected" mean?

A: REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) is a European Union regulation. "REACH Unaffected" indicates the part contains no substances of very high concern (SVHC) listed under REACH. "REACH Affected" indicates the part may contain SVHC substances but is compliant with REACH regulations. For most applications, both statuses are acceptable; verify your regional compliance requirements.

Q7: Why is the original MVE63VC101MJ10TP marked as "Obsolete"?

A: Obsolete status indicates the part is no longer manufactured or supported by Chemi-Con. Active substitutes from the same or other manufacturers are required for new designs and ongoing production. The parametric equivalent EMVE630ARA101MJA0G from Chemi-Con's active Alchip™ MVE series is the recommended replacement.

Q8: Are all substitute parts available in the same packaging (Tape & Reel or Cut Tape)?

A: No. Packaging varies by manufacturer and part number. The original MVE63VC101MJ10TP uses standard SMD packaging. Substitute parts are available in Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® formats. Verify packaging compatibility with your assembly process before ordering.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message