MVE16VC10RMD55TP Equivalent & Substitute Parts

Part Overview

The MVE16VC10RMD55TP is a 10 µF, 16 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Chemi-Con. This component is classified as obsolete, indicating discontinued production and limited availability. The part operates across a temperature range of -40°C to 105°C with a 1000-hour lifetime rating at 105°C, suitable for general-purpose applications requiring stable capacitance and low equivalent series resistance.

Identifying equivalent and substitute parts is necessary due to the obsolete status, which restricts procurement options and increases lead times. Direct replacements and parametric equivalents from active product lines ensure design continuity and supply chain reliability.

Key Parameters

Parameter	Value
Capacitance	10 µF
Voltage Rating	16 V
Tolerance	±20%
ESR @ 120 Hz	33.15 Ohm
Lifetime @ 105°C	1000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Ripple Current @ 120 Hz	17 mA
Case Size	0.157" Dia (4.00 mm)
Height	0.205" (5.20 mm)
Surface Mount Land Size	0.169" L x 0.169" W (4.30 mm x 4.30 mm)
Mounting Type	Surface Mount
Package	Radial, Can - SMD
Polarization	Polar

Substitute Part Grouping Explanation

Substitution of the MVE16VC10RMD55TP is determined by strict equivalence across the following parameters:

Capacitance: 10 µF (exact match required)
Voltage Rating: 16 V (exact match required)
Tolerance: ±20% (exact match required)
Lifetime: 1000 Hrs @ 105°C (exact match required)
Case Diameter: 0.157" (4.00 mm) (exact match required)
Surface Mount Land Size: 0.169" L x 0.169" W (4.30 mm x 4.30 mm) (exact match required)
Mounting Type: Surface Mount (exact match required)
Package: Radial, Can - SMD (exact match required)
Polarization: Polar (exact match required)

Substitute parts are classified into two categories:

Direct Manufacturer Equivalents: Parts from active product lines with identical electrical and mechanical specifications, differing only in series designation or manufacturing improvements.

Parametric Equivalents: Parts meeting all critical electrical and mechanical parameters with potential variations in ESR, ripple current handling, or operating temperature range extensions, provided these variations do not compromise circuit performance.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Tolerance	ESR @ 120 Hz	Lifetime @ 105°C	Operating Temp Range	Ripple Current @ 120 Hz	Case Size	Height	Product Status	RoHS Status
MVE16VC10RMD55TP	Chemi-Con	10 µF	16 V	±20%	33.15 Ohm	1000 Hrs	-40°C ~ 105°C	17 mA	0.157" (4.00 mm)	0.205" (5.20 mm)	Obsolete	Non-compliant
EMVY160ARA100MD55G	Chemi-Con	10 µF	16 V	±20%	—	1000 Hrs	-55°C ~ 105°C	24 mA	0.157" (4.00 mm)	0.205" (5.20 mm)	Active	ROHS3 Compliant
EMVE160ARA100MD55G	Chemi-Con	10 µF	16 V	±20%	—	1000 Hrs	-40°C ~ 105°C	17 mA	0.157" (4.00 mm)	0.205" (5.20 mm)	Active	ROHS3 Compliant
16SKV10M4X5.5	Rubycon	10 µF	16 V	±20%	—	1000 Hrs	-55°C ~ 105°C	20 mA	0.157" (4.00 mm)	0.217" (5.50 mm)	Obsolete	ROHS3 Compliant
16SZV10M4X5.5	Rubycon	10 µF	16 V	±20%	—	1000 Hrs	-55°C ~ 105°C	33 mA	0.157" (4.00 mm)	0.217" (5.50 mm)	Obsolete	ROHS3 Compliant
AFC106M16B12T-F	Cornell Dubilier Electronics	10 µF	16 V	±20%	26.5 Ohm	1000 Hrs	-55°C ~ 105°C	45 mA	0.157" (4.00 mm)	0.213" (5.40 mm)	Not For New Designs	ROHS3 Compliant
AVEZ106M16B12T-F	Cornell Dubilier Electronics	10 µF	16 V	±20%	3.2 Ohm	1000 Hrs	-55°C ~ 105°C	52 mA	0.157" (4.00 mm)	0.217" (5.50 mm)	Active	ROHS3 Compliant
EEE-FC1C100R	Panasonic Electronic Components	10 µF	16 V	±20%	—	1000 Hrs	-40°C ~ 105°C	45 mA	0.157" (4.00 mm)	0.213" (5.40 mm)	Not For New Designs	RoHS Compliant
EEE-HA1C100R	Panasonic Electronic Components	10 µF	16 V	±20%	—	1000 Hrs	-40°C ~ 105°C	28 mA	0.157" (4.00 mm)	0.213" (5.40 mm)	Not For New Designs	RoHS Compliant
UUQ1C100MCL1GB	Nichicon	10 µF	16 V	±20%	—	1000 Hrs	-40°C ~ 105°C	18 mA	0.157" (4.00 mm)	0.213" (5.40 mm)	Active	ROHS3 Compliant
UWT1C100MCL1GB	Nichicon	10 µF	16 V	±20%	—	1000 Hrs	-55°C ~ 105°C	18 mA	0.157" (4.00 mm)	0.213" (5.40 mm)	Active	ROHS3 Compliant

Engineering Selection Recommendations

Preferred Substitutes (Active Product Status):

EMVE160ARA100MD55G (Chemi-Con) is the primary parametric equivalent, maintaining identical operating temperature range (-40°C ~ 105°C) and ripple current specification (17 mA @ 120 Hz) as the original part while offering ROHS3 compliance and active product status. This part is recommended for direct replacement in existing designs.

EMVY160ARA100MD55G (Chemi-Con) provides an extended operating temperature range (-55°C ~ 105°C) and improved ripple current handling (24 mA @ 120 Hz) with ROHS3 compliance. Selection of this part is appropriate when designs require enhanced low-temperature performance.

AVEZ106M16B12T-F (Cornell Dubilier Electronics) is an active product offering significantly reduced ESR (3.2 Ohm) and elevated ripple current capacity (52 mA @ 120 Hz), suitable for applications demanding superior high-frequency performance and thermal stability.

UWT1C100MCL1GB (Nichicon) provides extended operating temperature range (-55°C ~ 105°C) with ROHS3 compliance and active product status, appropriate for general-purpose applications with enhanced low-temperature requirements.

UUQ1C100MCL1GB (Nichicon) maintains the original operating temperature range (-40°C ~ 105°C) with ROHS3 compliance and active product status, suitable for audio and general-purpose applications.

Secondary Substitutes (Not For New Designs / Obsolete Status):

AFC106M16B12T-F (Cornell Dubilier Electronics) carries AEC-Q200 automotive qualification and reduced ESR (26.5 Ohm) but is designated "Not For New Designs." This part is suitable only for legacy system maintenance or repair applications.

EEE-FC1C100R and EEE-HA1C100R (Panasonic Electronic Components) are designated "Not For New Designs" and are suitable only for sustaining production or repair of existing equipment.

16SKV10M4X5.5 and 16SZV10M4X5.5 (Rubycon) are obsolete products with extended height (0.217" vs. 0.205") and should be avoided unless PCB layout constraints have been specifically designed to accommodate increased height.

Frequently Asked Questions (FAQ)

Q: Can EMVE160ARA100MD55G directly replace MVE16VC10RMD55TP without PCB modification?

A: Yes. EMVE160ARA100MD55G maintains identical case diameter (0.157" / 4.00 mm), height (0.205" / 5.20 mm), and surface mount land size (0.169" L x 0.169" W / 4.30 mm x 4.30 mm). Operating temperature range and ripple current specifications are identical. No PCB layout changes are required.

Q: What is the impact of selecting EMVY160ARA100MD55G instead of EMVE160ARA100MD55G?

A: EMVY160ARA100MD55G extends the operating temperature range to -55°C and increases ripple current capacity to 24 mA @ 120 Hz. These improvements do not compromise compatibility; however, the part height remains 0.205" (5.20 mm), matching the original specification. Selection depends on whether the application requires enhanced low-temperature performance.

Q: Why do some substitute parts have different heights (0.213" or 0.217")?

A: Height variation occurs across different manufacturer product lines. Parts with 0.213" (5.40 mm) or 0.217" (5.50 mm) heights require verification that PCB clearance and component placement constraints accommodate the increased height. If the original design has minimal clearance above the capacitor, taller substitutes may not fit without PCB redesign.

Q: What does "Not For New Designs" status mean for parts like AFC106M16B12T-F?

A: "Not For New Designs" indicates the manufacturer has discontinued active support for new product development. These parts remain available for sustaining production and repair of existing equipment but should not be selected for new circuit designs. Active product alternatives are preferred.

Q: Are all substitute parts RoHS compliant?

A: The original MVE16VC10RMD55TP is RoHS non-compliant. All recommended active substitutes (EMVE160ARA100MD55G, EMVY160ARA100MD55G, AVEZ106M16B12T-F, UUQ1C100MCL1GB, UWT1C100MCL1GB) are ROHS3 compliant or RoHS compliant, meeting current environmental regulations.

Q: What is the significance of ESR differences between substitute parts?

A: ESR (Equivalent Series Resistance) affects impedance and thermal performance. The original part specifies 33.15 Ohm @ 120 Hz. AVEZ106M16B12T-F offers significantly lower ESR (3.2 Ohm), reducing heat generation and improving high-frequency performance. Parts with unspecified ESR values should be cross-referenced with manufacturer datasheets for detailed impedance characteristics.

Q: Can AVEZ106M16B12T-F be used in all applications where MVE16VC10RMD55TP was specified?

A: AVEZ106M16B12T-F is mechanically and electrically compatible with identical capacitance, voltage, tolerance, and lifetime specifications. The part height is 0.217" (5.50 mm) versus the original 0.205" (5.20 mm), requiring PCB clearance verification. The significantly lower ESR (3.2 Ohm) and higher ripple current capacity (52 mA @ 120 Hz) represent performance improvements suitable for most applications.

Q: What packaging options are available for substitute parts?

A: Substitute parts are supplied in Tape & Reel (TR) or Cut Tape (CT) packaging. EMVE160ARA100MD55G, EMVY160ARA100MD55G, AFC106M16B12T-F, AVEZ106M16B12T-F, EEE-FC1C100R, and EEE-HA1C100R are supplied in Tape & Reel format. 16SKV10M4X5.5, 16SZV10M4X5.5, and UWT1C100MCL1GB are supplied in Cut Tape or equivalent formats. Packaging selection depends on production volume and assembly process requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message