MVE10VC22RME55TP Equivalent & Substitute Parts

Part Overview

The MVE10VC22RME55TP is a 22 µF, 10 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Chemi-Con. This component is classified as obsolete, with 855 pieces currently in stock. The part operates across a temperature range of -40°C to 105°C with a rated lifetime of 1000 hours at 105°C, suitable for general-purpose applications requiring stable capacitance and low equivalent series resistance.

Due to its obsolete status, identifying equivalent and substitute parts is necessary for design continuity, procurement planning, and long-term product support. Substitute parts must maintain compatibility across critical electrical parameters including capacitance value, voltage rating, physical dimensions, and mounting specifications.

Key Parameters

Parameter	Value	Unit
Capacitance	22	µF
Tolerance	±20%	—
Voltage - Rated	10	V
ESR @ 120Hz	18.082	Ohm
Lifetime @ 105°C	1000	Hrs
Operating Temperature Range	-40 to 105	°C
Ripple Current @ 120 Hz	30	mA
Size / Diameter	5.00	mm
Height - Seated (Max)	5.20	mm
Surface Mount Land Size	5.30 x 5.30	mm
Mounting Type	Surface Mount	—
Package / Case	Radial, Can - SMD	—
Polarization	Polar	—
RoHS Status	Non-compliant	—
MSL Rating	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the MVE10VC22RME55TP are categorized based on the following substitution logic:

Direct Equivalents (Same Voltage Rating - 10V): Parts maintaining identical capacitance (22 µF), voltage rating (10 V), physical dimensions (5.00 mm diameter, 5.20 mm height), and surface mount land size (5.30 x 5.30 mm). These parts are interchangeable without circuit redesign.

Parametric Equivalents (Same Voltage Rating - 10V, Active Status): Parts with matching electrical specifications but upgraded product status from obsolete to active. These maintain the same 10 V rating and 22 µF capacitance with identical or compatible physical footprints.

Upgrade Options (Higher Voltage Rating - 16V): Parts rated at 16 V instead of 10 V, providing increased voltage margin while maintaining 22 µF capacitance and compatible physical dimensions. These are electrically backward-compatible in 10 V circuits and offer enhanced reliability headroom.

Extended Lifetime Upgrades (5000 Hrs @ 105°C): Parts with extended operational lifetime ratings compared to the standard 1000 hours, providing improved long-term reliability in thermally demanding applications.

Key Parameters for Substitution Compatibility:

Capacitance: 22 µF (fixed)
Voltage Rating: 10 V minimum (16 V acceptable as upgrade)
Physical Dimensions: 5.00 mm diameter, maximum height 5.50 mm
Surface Mount Land Size: 5.30 x 5.30 mm
Mounting Type: Surface Mount
Package: Radial, Can - SMD
Polarization: Polar

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance (µF)	Voltage (V)	Lifetime @ 105°C	Temp Range (°C)	Size Dia (mm)	Height (mm)	Product Status	RoHS Status
MVE10VC22RME55TP	Chemi-Con	MVE	22	10	1000 Hrs	-40 to 105	5.00	5.20	Obsolete	Non-compliant
EMVY100ARA220ME55G	Chemi-Con	MVY	22	10	1000 Hrs	-55 to 105	5.00	5.20	Active	ROHS3 Compliant
EMVE100ARA220ME55G	Chemi-Con	MVE	22	10	1000 Hrs	-40 to 105	5.00	5.20	Active	ROHS3 Compliant
EMVE160ARA220ME55G	Chemi-Con	MVE	22	16	1000 Hrs	-40 to 105	5.00	5.20	Active	ROHS3 Compliant
EMVY160ARA220ME55G	Chemi-Con	MVY	22	16	1000 Hrs	-55 to 105	5.00	5.20	Active	ROHS3 Compliant
EMVY160ARB220ME55G	Chemi-Con	MVY	22	16	5000 Hrs	-55 to 105	5.00	5.50	Active	ROHS3 Compliant
AVES226M10C12T-F	Cornell Dubilier Electronics	AVES	22	10	1000 Hrs	-55 to 105	5.00	5.50	Active	ROHS3 Compliant
AVEZ226M10C12T-F	Cornell Dubilier Electronics	AVEZ	22	10	1000 Hrs	-55 to 105	5.00	5.50	Active	ROHS3 Compliant
UUQ1A220MCL1GB	Nichicon	UUQ	22	10	1000 Hrs	-40 to 105	5.00	5.40	Active	ROHS3 Compliant
UWT1A220MCL1GB	Nichicon	UWT	22	10	1000 Hrs	-55 to 105	5.00	5.40	Active	ROHS3 Compliant
16SKV22M5X5.5	Rubycon	SKV	22	16	1000 Hrs	-55 to 105	5.00	5.50	Obsolete	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Same Electrical Specifications):

EMVE100ARA220ME55G is the primary direct replacement. This part maintains identical capacitance (22 µF), voltage rating (10 V), physical dimensions (5.00 mm diameter, 5.20 mm height), and surface mount land size. The part is manufactured by Chemi-Con in the active MVE series with ROHS3 compliance, addressing the RoHS non-compliance of the original obsolete part. Operating temperature range matches the original specification (-40°C to 105°C).

For Enhanced Compliance and Extended Temperature Range:

EMVY100ARA220ME55G provides the same electrical specifications as the original part while offering an extended operating temperature range (-55°C to 105°C) and ROHS3 compliance. This part is suitable for applications requiring broader temperature operation and regulatory compliance.

For Voltage Margin Enhancement:

EMVE160ARA220ME55G and EMVY160ARA220ME55G are 16 V rated upgrades maintaining 22 µF capacitance and compatible physical dimensions. These parts provide increased voltage headroom in 10 V circuits and are ROHS3 compliant. EMVY160ARA220ME55G extends the operating temperature range to -55°C to 105°C.

For Extended Lifetime Applications:

EMVY160ARB220ME55G offers 5000-hour lifetime at 105°C (compared to 1000 hours in the original), rated at 16 V with 22 µF capacitance. This part accommodates thermally demanding applications requiring enhanced long-term reliability. Maximum height increases to 5.50 mm; verify PCB layout clearance before selection.

For Multi-Source Alternatives:

Cornell Dubilier Electronics AVES226M10C12T-F and AVEZ226M10C12T-F provide 10 V, 22 µF specifications with ROHS3 compliance and active product status. Both parts feature extended temperature range (-55°C to 105°C) and are suitable for general-purpose applications. Height is 5.50 mm; verify clearance compatibility.

Nichicon UUQ1A220MCL1GB and UWT1A220MCL1GB are 10 V, 22 µF alternatives with ROHS3 compliance and active status. UWT1A220MCL1GB provides extended temperature range (-55°C to 105°C). Height is 5.40 mm.

Compliance Considerations:

All recommended active substitutes are ROHS3 compliant, addressing the non-compliance status of the original obsolete part. Parts are classified as REACH Unaffected or REACH Affected; verify REACH compliance requirements for specific applications.

Frequently Asked Questions (FAQ)

Q: Can EMVE100ARA220ME55G directly replace MVE10VC22RME55TP without circuit modification?

A: Yes. EMVE100ARA220ME55G maintains identical capacitance (22 µF), voltage rating (10 V), physical dimensions (5.00 mm diameter, 5.20 mm height), and surface mount land size (5.30 x 5.30 mm). The part is pin-compatible and electrically equivalent. Operating temperature range matches the original specification.

Q: What is the advantage of selecting a 16 V rated part instead of a 10 V replacement?

A: 16 V rated parts (EMVE160ARA220ME55G, EMVY160ARA220ME55G) provide increased voltage margin in 10 V circuits, enhancing reliability and reducing stress on the capacitor. These parts are electrically backward-compatible in 10 V applications and offer the same 22 µF capacitance with identical physical footprints.

Q: Does the height difference between 5.20 mm and 5.50 mm affect PCB assembly?

A: Height differences must be verified against PCB layout clearance specifications. Parts with 5.50 mm height (AVES226M10C12T-F, AVEZ226M10C12T-F, 16SKV22M5X5.5, EMVY160ARB220ME55G) require confirmation that component placement does not interfere with adjacent circuitry, connectors, or enclosure constraints. Consult PCB design documentation before selection.

Q: Are all substitute parts RoHS compliant?

A: All recommended active substitutes are ROHS3 compliant. The original MVE10VC22RME55TP is RoHS non-compliant. Selection of ROHS3 compliant alternatives addresses regulatory requirements for new designs and procurement.

Q: What is the difference between EMVE and EMVY series parts?

A: Both series are manufactured by Chemi-Con and maintain equivalent electrical specifications for the same voltage and capacitance ratings. EMVY series parts offer extended operating temperature range (-55°C to 105°C) compared to EMVE series (-40°C to 105°C). Selection depends on application temperature requirements.

Q: Can UUQ1A220MCL1GB or UWT1A220MCL1GB be used as substitutes?

A: Yes. Both Nichicon parts maintain 22 µF capacitance, 10 V voltage rating, and compatible physical dimensions (5.00 mm diameter, 5.40 mm height). Both are ROHS3 compliant and active products. UWT1A220MCL1GB provides extended temperature range (-55°C to 105°C). Height is 5.40 mm; verify PCB clearance.

Q: What is the significance of the 5000-hour lifetime rating in EMVY160ARB220ME55G?

A: EMVY160ARB220ME55G is rated for 5000 hours at 105°C, compared to 1000 hours in standard parts. This extended lifetime is suitable for applications with prolonged thermal stress or requiring enhanced long-term reliability. The part maintains 22 µF capacitance and 16 V rating with compatible physical footprint (5.00 mm diameter, 5.50 mm height).

Q: Is the original 16SKV22M5X5.5 part recommended as a substitute?

A: 16SKV22M5X5.5 is classified as obsolete despite ROHS3 compliance. While electrically compatible as a 16 V upgrade option, active alternatives (EMVE160ARA220ME55G, EMVY160ARA220ME55G) are preferred for new designs and long-term procurement continuity.

Q: What packaging formats are available for these substitute parts?

A: Substitute parts are available in Tape & Reel (TR) and Cut Tape (CT) formats. EMVE160ARA220ME55G and EMVY160ARA220ME55G are supplied in Tape & Reel. UUQ1A220MCL1GB and UWT1A220MCL1GB are supplied in Tape & Reel. Verify packaging requirements for automated assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message