MVA6.3VC222MK14TP Equivalent & Substitute Parts

Part Overview

The MVA6.3VC222MK14TP is a 2200 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Chemi-Con. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The part serves general-purpose applications requiring bulk capacitance in compact SMD form factor with 12.50 mm diameter and 13.50 mm height.

Key Parameters

Parameter	Value
Capacitance	2200 µF
Voltage Rating	6.3 V
Tolerance	±20%
Package Type	Radial, Can - SMD
Diameter	12.50 mm (0.492")
Height	13.50 mm (0.531")
Surface Mount Land Size	13.00 mm × 13.00 mm
Mounting Type	Surface Mount
Polarization	Polar
Operating Temperature Range	-40°C to 85°C
Lifetime Rating	2000 Hrs @ 85°C
RoHS Status	Non-compliant

Substitute Part Grouping Explanation

Substitution for the MVA6.3VC222MK14TP is determined by the following mandatory parameters:

Capacitance: 2200 µF (exact match required)
Voltage Rating: 6.3 V minimum (higher voltage ratings acceptable as derating)
Tolerance: ±20% (standard tolerance for aluminum electrolytic capacitors)
Package Type: Radial, Can - SMD (physical form factor)
Diameter: 12.50 mm (footprint compatibility)
Mounting Type: Surface Mount
Polarization: Polar

Substitute parts are grouped into two categories based on voltage rating:

Category A: 6.3 V Rated Substitutes — Direct voltage equivalents maintaining the original 6.3 V specification. These parts preserve the exact electrical rating of the original component.

Category B: 10 V Rated Substitutes — Higher voltage rating parts that operate within the 6.3 V application through voltage derating. These parts provide enhanced reliability margins in the same physical footprint.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Tolerance	Lifetime @ Temp	Operating Temp Range	Height (Max)	Product Status	RoHS Status
MVA6.3VC222MK14TP	Chemi-Con	2200 µF	6.3 V	±20%	2000 Hrs @ 85°C	-40°C ~ 85°C	13.50 mm	Obsolete	Non-compliant
EMVE6R3ARA222MKE0S	Chemi-Con	2200 µF	6.3 V	±20%	2000 Hrs @ 105°C	-40°C ~ 105°C	13.50 mm	Active	ROHS3 Compliant
EMVY6R3ARA222MKE0S	Chemi-Con	2200 µF	6.3 V	±20%	5000 Hrs @ 105°C	-55°C ~ 105°C	13.50 mm	Active	ROHS3 Compliant
6.3TLV2200M12.5X13.5	Rubycon	2200 µF	6.3 V	±20%	5000 Hrs @ 105°C	-55°C ~ 105°C	14.00 mm	Active	ROHS3 Compliant
6.3TRV2200M12.5X13.5	Rubycon	2200 µF	6.3 V	±20%	10000 Hrs @ 105°C	-40°C ~ 105°C	14.00 mm	Active	ROHS3 Compliant
EDH228M6R3A9RAA	KEMET	2200 µF	6.3 V	±20%	2000 Hrs @ 105°C	-40°C ~ 105°C	14.00 mm	Active	ROHS3 Compliant
EDH228M6R3S9RAA	KEMET	2200 µF	6.3 V	±20%	2000 Hrs @ 105°C	-40°C ~ 105°C	14.00 mm	Active	ROHS3 Compliant
AFK228M10H32T-F	Cornell Dubilier Electronics	2200 µF	10 V	±20%	5000 Hrs @ 105°C	-55°C ~ 105°C	14.00 mm	Active	ROHS3 Compliant
EDH228M010A9RAA	KEMET	2200 µF	10 V	±20%	2000 Hrs @ 105°C	-40°C ~ 105°C	14.00 mm	Active	ROHS3 Compliant
EDH228M010S9RAA	KEMET	2200 µF	10 V	±20%	2000 Hrs @ 105°C	-40°C ~ 105°C	14.00 mm	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Substitutes (6.3 V Category)

EMVY6R3ARA222MKE0S (Chemi-Con) and 6.3TRV2200M12.5X13.5 (Rubycon) are the preferred substitutes. Both maintain the original 6.3 V voltage specification while offering extended lifetime ratings (5000 Hrs and 10000 Hrs @ 105°C respectively) and ROHS3 compliance. These parts are active products with established supply chains.

For designs requiring automotive qualification, 6.3TLV2200M12.5X13.5 (Rubycon) carries AEC-Q200 certification and provides 5000 Hrs @ 105°C lifetime with ROHS3 compliance.

Secondary Substitutes (6.3 V Category)

EMVE6R3ARA222MKE0S (Chemi-Con) and EDH228M6R3A9RAA or EDH228M6R3S9RAA (KEMET) provide 6.3 V equivalence with 2000 Hrs @ 105°C lifetime. EDH228M6R3S9RAA includes AEC-Q200 automotive qualification.

Higher Voltage Alternatives (10 V Category)

AFK228M10H32T-F (Cornell Dubilier Electronics) and EDH228M010S9RAA (KEMET) operate at 10 V rating, providing voltage derating margin when used in 6.3 V applications. Both carry AEC-Q200 automotive certification. EDH228M010S9RAA is recommended for automotive applications requiring higher reliability margins.

Height Consideration

The original MVA6.3VC222MK14TP specifies 13.50 mm maximum height. Most active substitutes (Rubycon TLV/TRV series and KEMET EDH series) have 14.00 mm maximum height. Verify PCB clearance before selection. EMVE6R3ARA222MKE0S and EMVY6R3ARA222MKE0S maintain 13.50 mm height compatibility.

Frequently Asked Questions (FAQ)

Q: Can I use a 10 V rated capacitor in place of the 6.3 V original?

A: Yes. A 10 V rated capacitor operates safely in a 6.3 V application through voltage derating. The higher voltage rating provides additional reliability margin. Physical footprint and land pattern compatibility must still be verified.

Q: What is the height difference between the original and substitute parts?

A: The original MVA6.3VC222MK14TP is 13.50 mm tall. Most active substitutes are 14.00 mm tall. This 0.50 mm difference must be evaluated against PCB clearance and assembly constraints. EMVE6R3ARA222MKE0S and EMVY6R3ARA222MKE0S maintain the original 13.50 mm height.

Q: Are all substitute parts RoHS compliant?

A: The original MVA6.3VC222MK14TP is RoHS non-compliant. All listed substitute parts are ROHS3 compliant, meeting current environmental regulations.

Q: Which substitute offers the longest operational lifetime?

A: 6.3TRV2200M12.5X13.5 (Rubycon) provides 10000 Hrs @ 105°C, the highest lifetime rating among 6.3 V substitutes. EMVY6R3ARA222MKE0S (Chemi-Con) offers 5000 Hrs @ 105°C.

Q: What is the difference between EDH228M6R3A9RAA and EDH228M6R3S9RAA?

A: Both are KEMET EDH series 2200 µF 6.3 V capacitors with identical electrical specifications. The "S" designation in EDH228M6R3S9RAA indicates AEC-Q200 automotive qualification, while the "A" version does not carry this certification.

Q: Can I substitute parts from different manufacturers?

A: Yes. All listed substitutes maintain the same capacitance (2200 µF), voltage rating (6.3 V or higher), tolerance (±20%), and physical form factor (radial can SMD). Cross-manufacturer substitution is electrically valid when these parameters match.

Q: What is the land pattern difference for AFK228M10H32T-F?

A: AFK228M10H32T-F has a surface mount land size of 13.50 mm × 15.00 mm, compared to the standard 13.00 mm × 13.00 mm for most other parts. PCB layout modification may be required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message