MVA63VC10RMF55TP Equivalent & Substitute Parts

Part Overview

The MVA63VC10RMF55TP is a 10 µF, 63 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Chemi-Con. This component is classified as obsolete, indicating discontinuation from the manufacturer. The part operates across a temperature range of -40°C to 85°C with a rated lifetime of 2000 hours at 85°C, suitable for general-purpose applications requiring stable capacitance and low equivalent series resistance.

Identification of equivalent and substitute parts is necessary due to the obsolete status of the MVA63VC10RMF55TP. Substitute components must maintain electrical compatibility through matching capacitance, voltage rating, tolerance, operating temperature range, and physical dimensions to ensure direct replacement in existing designs without circuit modification.

Substiute Parts

MVA63VC10RMF55TP

Chemi-ConIn Stock: 1249MVA63VC10RMF55TP Datasheet

Current PartRFQ

EMVA630ADA100MF55G

Chemi-ConIn Stock: 2252EMVA630ADA100MF55G Datasheet

Parametric EquivalentRFQ

EDK106M063S9GAA

KEMETIn Stock: 861EDK106M063S9GAA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution validity for the MVA63VC10RMF55TP is determined by strict equivalence across the following parameters:

Electrical Parameters (Must Match):

• Capacitance: 10 µF
• Voltage Rating: 63 V
• Tolerance: ±20%
• Operating Temperature Range: -40°C to 85°C
• Lifetime: 2000 Hrs @ 85°C minimum

Mechanical Parameters (Must Match):

• Package Type: Radial, Can - SMD
• Mounting Type: Surface Mount
• Polarization: Polar
• Physical Dimensions: 0.248" Dia (6.30mm), Height 0.205" (5.20mm) maximum
• Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm)

Acceptable Variations:

• ESR (Equivalent Series Resistance) values may differ if not specified in original part
• Ripple current ratings may vary between manufacturers
• RoHS compliance status may differ (original is non-compliant; substitutes may be compliant)
• Product status may differ (original is obsolete; substitutes may be active or last-time-buy)

The two identified substitute parts meet all critical electrical and mechanical parameters for direct replacement.

Parameter Comparison

Engineering Selection Recommendations

EMVA630ADA100MF55G (Chemi-Con): This substitute maintains manufacturer continuity with the original MVA63VC10RMF55TP, both sourced from Chemi-Con. All electrical and mechanical parameters are identical. The part is classified as Last Time Buy, indicating limited availability. ROHS3 compliance provides regulatory advantage over the non-compliant original part. This option is suitable for designs requiring manufacturer consistency and improved environmental compliance.

EDK106M063S9GAA (KEMET): This substitute is an active product with full availability, eliminating supply chain risk associated with obsolete or last-time-buy components. All critical electrical parameters match the original specification. The height dimension is 0.222" (5.65mm) compared to the original 0.205" (5.20mm), representing a 0.017" (0.45mm) increase. This height difference must be evaluated against available PCB clearance in the target application. ROHS3 compliance and AEC-Q200 automotive qualification are provided. This option is recommended for new designs or applications where supply continuity is prioritized.

Both substitutes are electrically and mechanically compatible for direct replacement based on the provided parameters.

Frequently Asked Questions (FAQ)

Q: Can the EDK106M063S9GAA be used as a direct replacement despite the height difference of 0.017"?

A: The EDK106M063S9GAA has a maximum seated height of 0.222" compared to the original 0.205". This 0.017" (0.45mm) difference must be verified against PCB layout clearance, component proximity, and enclosure constraints. If vertical clearance is available, the part is mechanically compatible. If clearance is limited, the EMVA630ADA100MF55G maintains the original height specification.

Q: Why are the ESR values not specified for the substitute parts?

A: ESR (Equivalent Series Resistance) data was not provided in the substitute part specifications. The original MVA63VC10RMF55TP specifies 19.89 Ohm @ 120Hz. If ESR performance is critical to circuit function, contact the manufacturer for detailed specifications before final selection.

Q: Are both substitutes suitable for automotive applications?

A: The EDK106M063S9GAA carries AEC-Q200 automotive qualification. The EMVA630ADA100MF55G does not list automotive certification in the provided data. For automotive applications, the EDK106M063S9GAA is the specified choice.

Q: What is the difference between Last Time Buy and Active product status?

A: Last Time Buy (EMVA630ADA100MF55G) indicates the manufacturer will discontinue the part after current inventory is exhausted, with no future production. Active (EDK106M063S9GAA) indicates ongoing production and availability. For long-term supply security, the active product is preferred.

Q: Do the RoHS compliance differences affect substitution?

A: The original MVA63VC10RMF55TP is RoHS non-compliant. Both substitutes are ROHS3 compliant. If the target application or market requires RoHS compliance, the substitutes provide regulatory advantage. If the original non-compliant status is acceptable, compliance differences do not prevent substitution.

Q: Can these parts be used interchangeably in the same PCB design?

A: Yes, both substitutes are mechanically and electrically compatible for PCB footprint reuse. The EDK106M063S9GAA requires verification of the 0.017" height increase against available clearance. Both parts use identical land sizes (0.260" L x 0.260" W) and mounting type (Surface Mount).

Q: What is the inventory status for each part?

A: MVA63VC10RMF55TP: 1149 Pcs in stock (obsolete status). EMVA630ADA100MF55G: 2196 Pcs in stock (last time buy). EDK106M063S9GAA: 816 Pcs in stock (active product). For ongoing production requirements, the active product EDK106M063S9GAA is recommended.