MVA10VC101MF55TP Equivalent & Substitute Parts

Part Overview

The MVA10VC101MF55TP is a 100 µF, 10 V aluminum electrolytic capacitor manufactured by Chemi-Con in surface mount radial can package. This component is classified as obsolete, indicating discontinued production and limited availability. The part operates across a temperature range of -40°C to 85°C with a rated lifetime of 2000 hours at 85°C, suitable for general-purpose applications requiring stable capacitance and low equivalent series resistance.

Identification of equivalent and substitute parts is necessary due to the obsolete status of the MVA10VC101MF55TP. Direct replacement options from active manufacturers ensure design continuity, supply chain reliability, and access to components with improved compliance certifications such as RoHS3 and AEC-Q200 automotive qualification.

Key Parameters

Parameter	Value	Unit
Capacitance	100	µF
Tolerance	±20%	—
Voltage - Rated	10	V
ESR @ 120 Hz	4.973	Ohm
Lifetime @ Temperature	2000 Hrs @ 85°C	—
Operating Temperature Range	-40°C ~ 85°C	—
Ripple Current @ 120 Hz	70	mA
Size / Dimension	0.248" Dia (6.30 mm)	—
Height - Seated (Max)	0.205" (5.20 mm)	—
Surface Mount Land Size	0.260" L x 0.260" W (6.60 mm x 6.60 mm)	—
Mounting Type	Surface Mount	—
Package / Case	Radial, Can - SMD	—
Polarization	Polar	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the MVA10VC101MF55TP are categorized into two groups based on electrical and mechanical compatibility:

Direct Substitutes (10 V Rated)

Direct substitutes maintain the same rated voltage (10 V), capacitance (100 µF), tolerance (±20%), and surface mount package configuration. These parts are electrically interchangeable with the original component. Substitution is valid when the following parameters align:

Capacitance: 100 µF
Voltage Rating: 10 V
Tolerance: ±20%
Mounting Type: Surface Mount
Package: Radial, Can - SMD
Surface Mount Land Size: 0.260" L x 0.260" W (6.60 mm x 6.60 mm)
Operating Temperature Range: -40°C ~ 85°C (minimum)
Lifetime: 2000 Hrs @ 85°C (minimum)

Upgrade Substitutes (16 V Rated)

Upgrade substitutes feature a higher rated voltage (16 V) while maintaining the same capacitance (100 µF), tolerance (±20%), and surface mount package. These parts provide enhanced voltage margin and are mechanically compatible. Upgrades are applicable in designs where higher voltage headroom is acceptable or beneficial. Upgrade substitution requires verification that the 16 V rating does not conflict with circuit design intent.

Parameter Comparison

Part Number	Manufacturer	Capacitance (µF)	Voltage (V)	Tolerance	ESR @ 120 Hz (Ohm)	Lifetime @ Temp	Operating Temp (°C)	Ripple Current @ 120 Hz (mA)	Height (mm)	Product Status	RoHS Status
MVA10VC101MF55TP	Chemi-Con	100	10	±20%	4.973	2000 Hrs @ 85°C	-40 ~ 85	70	5.20	Obsolete	Non-compliant
10SEV100M6.3X5.5	Rubycon	100	10	±20%	—	2000 Hrs @ 85°C	-40 ~ 85	71	5.50	Obsolete	ROHS3 Compliant
EDK107M010A9GAA	KEMET	100	10	±20%	—	2000 Hrs @ 85°C	-40 ~ 85	70	5.65	Active	ROHS3 Compliant
EDK107M010S9GAA	KEMET	100	10	±20%	—	2000 Hrs @ 85°C	-40 ~ 85	70	5.65	Active	ROHS3 Compliant
EEE-1AA101SP	Panasonic Electronic Components	100	10	±20%	—	2000 Hrs @ 85°C	-40 ~ 85	70	5.40	Not For New Designs	RoHS Compliant
UWJ1A101MCL1GB	Nichicon	100	10	±20%	—	2000 Hrs @ 85°C	-40 ~ 85	76	5.50	Obsolete	ROHS3 Compliant
EDH107M010A9GAA	KEMET	100	10	±20%	—	2000 Hrs @ 105°C	-40 ~ 105	71	5.65	Active	ROHS3 Compliant
107AXZ016MQ5	Cornell Dubilier / Illinois Capacitor	100	16	±20%	2.65	2000 Hrs @ 105°C	-55 ~ 105	115	5.60	Active	ROHS3 Compliant
107SML016M	Cornell Dubilier / Illinois Capacitor	100	16	±20%	3.316	2000 Hrs @ 85°C	-40 ~ 85	103	5.50	Active	ROHS3 Compliant
16SEV100M6.3X5.5	Rubycon	100	16	±20%	—	2000 Hrs @ 85°C	-40 ~ 85	86	5.50	Obsolete	ROHS3 Compliant
AVS107M16D16T-F	Cornell Dubilier Electronics (CDE)	100	16	±20%	4.3	2000 Hrs @ 85°C	-40 ~ 85	70	5.40	Not For New Designs	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (10 V Rated)

The KEMET EDK107M010A9GAA and EDK107M010S9GAA are recommended as primary direct substitutes. Both parts are in active production status, ROHS3 compliant, and maintain identical electrical specifications (100 µF, 10 V, ±20% tolerance, 2000 Hrs @ 85°C). The EDK107M010S9GAA variant includes AEC-Q200 automotive qualification, suitable for applications requiring automotive-grade reliability.

The Panasonic EEE-1AA101SP provides an alternative direct substitute with RoHS compliance and AEC-Q200 automotive rating. However, this part is classified as "Not For New Designs," limiting its suitability for new product development.

For Enhanced Performance (10 V Rated, Extended Temperature)

The KEMET EDH107M010A9GAA offers extended operating temperature range (-40°C to 105°C) and extended lifetime (2000 Hrs @ 105°C) while maintaining 10 V rating. This upgrade is applicable in designs requiring higher temperature margin without voltage rating change.

For Voltage Upgrade (16 V Rated)

The Cornell Dubilier 107AXZ016MQ5 and 107SML016M provide 16 V rated alternatives with active production status and ROHS3 compliance. The 107AXZ016MQ5 offers extended operating temperature (-55°C to 105°C) and extended lifetime (2000 Hrs @ 105°C), suitable for demanding thermal environments. The 107SML016M maintains the standard operating temperature range (-40°C to 85°C) with active production status.

The Rubycon 16SEV100M6.3X5.5 provides a 16 V upgrade option with AEC-Q200 automotive qualification, though production status is obsolete.

Compliance Considerations

All recommended active-status substitutes are ROHS3 compliant, addressing regulatory requirements absent in the original MVA10VC101MF55TP. Selection should prioritize active production status parts (EDK107M010A9GAA, EDK107M010S9GAA, EDH107M010A9GAA, 107AXZ016MQ5, 107SML016M) to ensure long-term supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can the EDK107M010A9GAA directly replace the MVA10VC101MF55TP without circuit modification?

A: Yes. The EDK107M010A9GAA maintains identical capacitance (100 µF), voltage rating (10 V), tolerance (±20%), lifetime (2000 Hrs @ 85°C), and surface mount package configuration. The part is mechanically and electrically compatible. Height difference (5.65 mm vs. 5.20 mm) is within typical PCB assembly tolerances for surface mount components.

Q: What is the difference between direct substitutes and upgrade substitutes?

A: Direct substitutes maintain the 10 V voltage rating of the original part. Upgrade substitutes feature 16 V rating, providing higher voltage margin. Upgrades are mechanically compatible but require circuit design verification to confirm that 16 V rating does not conflict with intended application parameters.

Q: Why is the KEMET EDK107M010S9GAA preferred over EDK107M010A9GAA?

A: Both parts are electrically identical and in active production. The EDK107M010S9GAA includes AEC-Q200 automotive qualification, indicating compliance with automotive reliability standards. Selection depends on application requirements; automotive applications benefit from AEC-Q200 certification.

Q: Are there height restrictions for substitution?

A: The original MVA10VC101MF55TP has a maximum seated height of 5.20 mm. Substitute parts range from 5.40 mm to 5.65 mm. These height variations are within standard PCB assembly clearance specifications for surface mount components. Verify clearance in specific PCB layout if height-constrained applications exist.

Q: What is the significance of "Not For New Designs" product status?

A: Parts marked "Not For New Designs" (such as EEE-1AA101SP and AVS107M16D16T-F) are in limited production for legacy support only. These parts are not recommended for new product development due to uncertain long-term availability. Active production status parts are preferred for new designs.

Q: Can the 16 V upgrade parts be used in circuits designed for 10 V capacitors?

A: Yes, mechanically and electrically. The 16 V rating provides additional voltage margin and does not degrade performance in 10 V circuits. However, circuit design intent should be verified; if the original 10 V rating was selected for specific reasons (such as cost or size optimization), upgrade to 16 V may introduce unnecessary design changes.

Q: What does ROHS3 compliance mean for this component?

A: ROHS3 compliance indicates the capacitor meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. The original MVA10VC101MF55TP is RoHS non-compliant. All recommended active-status substitutes are ROHS3 compliant, meeting current regulatory requirements for electronics manufacturing.

Q: Is ESR (Equivalent Series Resistance) a critical parameter for substitution?

A: ESR affects ripple current handling and thermal performance. The original part specifies 4.973 Ohm @ 120 Hz. Substitute parts with unspecified ESR values (indicated by "—") are still compatible if ripple current ratings meet or exceed application requirements. The 107AXZ016MQ5 specifies lower ESR (2.65 Ohm), providing improved performance in high-ripple-current applications.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Both are surface mount tape formats suitable for automated assembly. Cut Tape is supplied in shorter lengths for manual or small-batch handling. Tape & Reel is supplied on continuous reels for high-volume automated assembly. Electrical and mechanical specifications are identical; packaging selection depends on production volume and assembly equipment.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message