MV8715 LED Orange Clear T-1 3/4 Through Hole Equivalent & Substitute Parts

Part Overview

The MV8715 is an orange 615nm LED indication component manufactured by onsemi, designed for through-hole mounting applications. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. The MV8715 delivers 2400mcd at 2.1V forward voltage with a 12° viewing angle in a standard 5mm T-1 3/4 radial package. Substitute parts must maintain compatibility with through-hole mounting, radial package configuration, and the electrical characteristics required for LED indication circuits.

Substiute Parts

MV8715

onsemiIn Stock: 850MV8715 Datasheet

Current PartRFQ

5219466F

DialightIn Stock: 13695219466F Datasheet

SimilarRFQ

HLMP-EJ08-WZ000

Broadcom LimitedIn Stock: 1089HLMP-EJ08-WZ000 Datasheet

SimilarRFQ

HLMP-EJ30-NR000

Broadcom LimitedIn Stock: 1024HLMP-EJ30-NR000 Datasheet

SimilarRFQ

HLMP-EJ30-NR0DD

Broadcom LimitedIn Stock: 19781HLMP-EJ30-NR0DD Datasheet

SimilarRFQ

LTL2R3KSK

Lite-On Inc.In Stock: 15658LTL2R3KSK Datasheet

SimilarRFQ

OVLFY3C7

TT Electronics/Optek TechnologyIn Stock: 42025OVLFY3C7 Datasheet

SimilarRFQ

OVLGY0C9B9

TT Electronics/Optek TechnologyIn Stock: 79632OVLGY0C9B9 Datasheet

SimilarRFQ

SLI-570DT3F

Rohm SemiconductorIn Stock: 1121SLI-570DT3F Datasheet

SimilarRFQ

SLI-570Y2T3F

Rohm SemiconductorIn Stock: 2149SLI-570Y2T3F Datasheet

SimilarRFQ

SLI-570YT3F

Rohm SemiconductorIn Stock: 1877SLI-570YT3F Datasheet

SimilarRFQ

WP7113SYCK/J3

KingbrightIn Stock: 23995WP7113SYCK/J3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the MV8715 is based on the following critical parameters that determine functional and mechanical compatibility:

Primary Substitution Criteria:

• Mounting Type: Through Hole (mandatory)
• Package Configuration: Radial (mandatory)
• Lens Size: 5mm, T-1 3/4 (mandatory for mechanical fit)
• Lens Style: Round with Domed Top (mandatory)
• Lens Transparency: Clear (mandatory)
• Voltage - Forward (Vf): 1.9V to 2.2V range (acceptable for circuit compatibility)
• Current - Test: 20mA (standard test condition)
• Moisture Sensitivity Level: 1 (Unlimited) (preferred for reliability)

Color and Wavelength Considerations: Substitute parts are grouped into two categories: orange wavelength parts (605nm to 620nm) that provide direct functional replacement, and yellow wavelength parts (583nm to 591nm) that serve as alternative indication colors where circuit design permits. Orange substitutes maintain the original color specification; yellow substitutes require design review for color compatibility.

Compliance and Status: Active product status is preferred for long-term availability. RoHS3 compliance and REACH Unaffected status are documented where applicable.

Parameter Comparison

Engineering Selection Recommendations

Orange Wavelength Direct Replacements (Preferred for Color Compatibility):

HLMP-EJ30-NR0DD and HLMP-EJ30-NR000 (Broadcom Limited) are active orange LEDs with 605nm wavelength, 1.98V forward voltage, and 5mm T-1 3/4 package. These parts maintain orange color specification and are RoHS3 compliant. The HLMP-EJ30-NR0DD variant in Cut Tape packaging offers 19,741 units in stock. Brightness is lower at 1290mcd compared to MV8715's 2400mcd, with a wider 30° viewing angle. These are suitable where lower brightness and wider viewing angle are acceptable.

HLMP-EJ08-WZ000 (Broadcom Limited) is an active orange LED with 605nm wavelength, 1.98V forward voltage, and significantly higher brightness at 10,750mcd. This part features a narrower 8° viewing angle and is RoHS3 compliant. Selection depends on circuit requirements for brightness and viewing angle.

SLI-570DT3F (Rohm Semiconductor) is an active orange LED with 611nm wavelength, 1.9V forward voltage, and 3000mcd brightness. The 20° viewing angle and 8.85mm height provide moderate brightness and viewing characteristics. RoHS3 compliant with 1,064 units in stock.

Yellow Wavelength Alternatives (Requires Design Review for Color Change):

SLI-570YT3F (Rohm Semiconductor) is an active yellow LED with 591nm wavelength, 2.1V forward voltage matching MV8715, and 5200mcd brightness. The 20° viewing angle and 5mm T-1 3/4 package provide mechanical compatibility. RoHS3 compliant with 1,826 units in stock. Suitable where yellow indication is acceptable and higher brightness is beneficial.

OVLFY3C7 (TT Electronics/Optek Technology) is an active yellow LED with 589nm wavelength, 2.0V forward voltage, and 7400mcd brightness. The 30° viewing angle and 5mm T-1 3/4 package provide wide viewing characteristics. RoHS3 compliant with 41,918 units in stock. High availability and brightness make this suitable for applications requiring wide viewing angle.

OVLGY0C9B9 (TT Electronics/Optek Technology) is an active yellow LED with 589nm wavelength, 2.0V forward voltage, and 14,000mcd brightness. The narrow 8° viewing angle provides focused indication. RoHS3 compliant with 79,595 units in stock. Highest brightness option among substitutes.

LTL2R3KSK (Lite-On Inc.) is an active yellow LED with 590nm wavelength, 2.05V forward voltage, and 1150mcd brightness. The 30° viewing angle and 5mm T-1 3/4 package provide wide viewing. RoHS3 compliant with 15,591 units in stock. REACH Affected status requires compliance verification.

5219466F (Dialight) is an active yellow LED with 583nm wavelength, 2.2V forward voltage, and 140mcd brightness. The 24° viewing angle and 4.83mm lens size differ from MV8715. RoHS3 compliant with 1,273 units in stock. Lower brightness and different lens size limit compatibility.

Frequently Asked Questions (FAQ)

Q: Can I use a yellow LED substitute in place of the orange MV8715?

A: Yellow LED substitutes (SLI-570YT3F, OVLFY3C7, OVLGY0C9B9, LTL2R3KSK, 5219466F) are mechanically and electrically compatible with through-hole mounting and radial package requirements. However, color change from orange (615nm) to yellow (583nm to 591nm) alters the visual indication. Use yellow substitutes only where circuit design and application requirements permit color change.

Q: What is the difference between HLMP-EJ30-NR0DD and HLMP-EJ30-NR000?

A: Both parts are identical in electrical and optical specifications (605nm, 1.98V, 1290mcd, 30° viewing angle, 5mm T-1 3/4 package). The difference is packaging: HLMP-EJ30-NR0DD is supplied in Cut Tape (CT) with 19,741 units in stock, while HLMP-EJ30-NR000 is supplied in Bulk with 926 units in stock. Select based on procurement and assembly requirements.

Q: How does brightness (mcd) affect substitution?

A: The MV8715 provides 2400mcd. Orange substitutes range from 1290mcd (HLMP-EJ30 series) to 10,750mcd (HLMP-EJ08-WZ000). Yellow substitutes range from 140mcd (5219466F) to 14,000mcd (OVLGY0C9B9). Lower brightness may reduce visibility; higher brightness increases power consumption and heat generation. Select based on circuit design requirements for indicator visibility and power budget.

Q: What viewing angle should I select?

A: The MV8715 has a 12° viewing angle. Substitutes range from 8° (narrow, focused indication) to 30° (wide, distributed indication). Narrow viewing angles (8°) concentrate light intensity; wide viewing angles (30°) distribute light over a broader area. Select based on application requirements for indicator visibility from different viewing positions.

Q: Are all substitutes RoHS3 compliant?

A: All listed substitutes are RoHS3 compliant except where noted. Verify compliance documentation for your specific application and regional requirements.

Q: What is the significance of forward voltage (Vf) differences?

A: The MV8715 operates at 2.1V typical. Substitutes range from 1.9V to 2.2V. These small differences are acceptable in most LED indication circuits with current-limiting resistors. Verify circuit design accommodates the forward voltage of the selected substitute to ensure proper brightness and reliability.

Q: Can I substitute based on viewing angle alone?

A: No. Viewing angle is one of several parameters. Mechanical compatibility (5mm T-1 3/4 through-hole radial package), electrical compatibility (forward voltage and current), and color (orange or yellow) must all be verified. Use the parameter comparison table to confirm all critical specifications match application requirements.

Q: What does "REACH Affected" mean for LTL2R3KSK?

A: REACH Affected status indicates the part may contain substances of concern under REACH regulations. Verify compliance with your regional environmental and safety requirements before selection. All other substitutes are REACH Unaffected.