MV8714 LED Orange Clear T-1 3/4 Through Hole Equivalent & Substitute Parts

Part Overview

The MV8714 is an orange 615nm LED indication component manufactured by onsemi, designed for through-hole mounting applications. This discrete radial LED operates at 2.1V forward voltage with a 1500mcd brightness rating and 12° viewing angle. The product is currently obsolete, making equivalent substitute parts necessary for ongoing design requirements, maintenance, and production continuity. Suitable alternatives must maintain compatibility with through-hole mounting, radial package configuration, and the electrical characteristics required for standard LED indication circuits.

Key Parameters

Parameter	MV8714 Specification
Manufacturer	onsemi
Color	Orange
Lens Size	5mm, T-1 3/4
Mounting Type	Through Hole
Package / Case	Radial
Voltage - Forward (Vf) (Typ)	2.1V
Current - Test	20mA
Millicandela Rating	1500mcd
Wavelength - Dominant	615nm
Viewing Angle	12°
Height (Max)	8.89mm
Lens Transparency	Clear
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution logic for the MV8714 is based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

Mounting Type: Through Hole (all substitutes must support through-hole installation)
Package Configuration: Radial (mechanical fit requirement)
Lens Size: 5mm, T-1 3/4 (physical form factor)
Lens Transparency: Clear (optical characteristic)
Voltage - Forward (Vf): 2.1V nominal (circuit compatibility tolerance: ±0.2V acceptable)
Current - Test: 20mA (standard LED test current)

Substitution Categories:

Category A - Direct Orange LED Substitutes (Preferred): Parts maintaining orange color (605nm-615nm wavelength range) with compatible electrical characteristics and through-hole radial packaging. These provide the closest functional equivalence.

Category B - Alternative Color LED Substitutes (Yellow): Parts with yellow color (583nm-591nm wavelength range) and compatible electrical characteristics. These are functional substitutes where color differentiation is acceptable or required by design modification.

Substitutes are grouped by color family and brightness characteristics to enable selection based on specific application requirements while maintaining through-hole radial package compatibility.

Parameter Comparison

Part Number	Manufacturer	Color	Vf (Typ)	mcd Rating	Wavelength (nm)	Viewing Angle	Height (Max)	Product Status	Packaging
MV8714	onsemi	Orange	2.1V	1500	615	12°	8.89mm	Obsolete	Radial
HLMP-EJ30-NR0DD	Broadcom Limited	Orange	1.98V	1290	605	30°	8.91mm	Active	Cut Tape (CT)
HLMP-EJ30-NR000	Broadcom Limited	Orange	1.98V	1290	605	30°	8.91mm	Active	Bulk
HLMP-EJ08-WZ000	Broadcom Limited	Orange	1.98V	10750	605	8°	8.91mm	Active	Bulk
SLI-570DT3F	Rohm Semiconductor	Orange	1.9V	3000	611	20°	8.85mm	Active	Bulk
SLI-570YT3F	Rohm Semiconductor	Yellow	2.1V	5200	591	20°	8.85mm	Active	Bulk
SLI-570Y2T3F	Rohm Semiconductor	Yellow	2.1V	5200	591	20°	8.85mm	Active	Bulk
LTL2R3KSK	Lite-On Inc.	Yellow	2.05V	1150	590	30°	8.70mm	Active	Bulk
OVLFY3C7	TT Electronics/Optek Technology	Yellow	2V	7400	589	30°	8.70mm	Active	Bulk
OVLGY0C9B9	TT Electronics/Optek Technology	Yellow	2V	14000	589	8°	8.90mm	Active	Bulk
5219466F	Dialight	Yellow	2.2V	140	583	24°	8.81mm	Active	Bulk

Engineering Selection Recommendations

Orange LED Direct Substitutes (Recommended Priority):

HLMP-EJ30-NR0DD and HLMP-EJ30-NR000 (Broadcom Limited) maintain orange color specification with 1290mcd brightness and 1.98V forward voltage. Both are active products with ROHS3 compliance and REACH unaffected status. The Cut Tape packaging variant (HLMP-EJ30-NR0DD) offers 19,741 units in stock. These parts provide the closest functional match to MV8714 with wider 30° viewing angle compared to the original 12°.

HLMP-EJ08-WZ000 (Broadcom Limited) is an orange LED alternative with significantly higher brightness (10,750mcd) and narrower 8° viewing angle. This part is suitable for applications requiring increased luminous intensity with directional output. Active product status with ROHS3 compliance.

SLI-570DT3F (Rohm Semiconductor) provides orange LED functionality at 1.9V forward voltage with 3000mcd brightness and 20° viewing angle. Active product with ROHS3 compliance and 1,064 units in stock. Wavelength specification of 611nm falls within acceptable orange range.

Yellow LED Substitutes (Alternative Color Applications):

SLI-570YT3F and SLI-570Y2T3F (Rohm Semiconductor) match the original 2.1V forward voltage specification with 5200mcd brightness and 20° viewing angle. Both are active products with ROHS3 compliance. These parts are suitable where yellow indication is functionally acceptable.

OVLFY3C7 (TT Electronics/Optek Technology) offers yellow LED indication with 7400mcd brightness, 2V forward voltage, and 30° viewing angle. High inventory availability (41,918 units) with ROHS3 compliance and REACH unaffected status.

OVLGY0C9B9 (TT Electronics/Optek Technology) provides yellow LED with highest brightness rating (14,000mcd) and narrow 8° viewing angle. Suitable for high-intensity indication applications. Extensive inventory (79,595 units) with ROHS3 compliance.

LTL2R3KSK (Lite-On Inc.) is a yellow LED with 1150mcd brightness and 2.05V forward voltage, closest to original brightness level. 30° viewing angle with 15,591 units in stock. Note: REACH Affected status requires compliance verification for specific applications.

5219466F (Dialight) provides yellow LED indication with lowest brightness rating (140mcd) and 2.2V forward voltage. Suitable for low-intensity indication applications. 1,273 units in stock with ROHS3 compliance.

Selection Criteria Summary:

For direct orange color replacement: HLMP-EJ30-NR0DD or HLMP-EJ30-NR000
For high-brightness orange: HLMP-EJ08-WZ000
For yellow alternative with matched voltage: SLI-570YT3F or SLI-570Y2T3F
For high-brightness yellow: OVLGY0C9B9
For brightness-matched yellow: LTL2R3KSK

All recommended substitutes maintain through-hole radial package configuration, 5mm T-1 3/4 lens size, clear lens transparency, and 20mA test current compatibility with MV8714 circuit requirements.

Frequently Asked Questions (FAQ)

Q: Can HLMP-EJ30-NR0DD directly replace MV8714 in existing PCB designs?

A: Yes. HLMP-EJ30-NR0DD maintains identical through-hole radial package configuration, 5mm T-1 3/4 lens size, and compatible forward voltage (1.98V vs. 2.1V). Physical dimensions are equivalent (8.91mm height vs. 8.89mm). The primary difference is wider 30° viewing angle compared to MV8714's 12°, which is functionally acceptable for most indication applications. No PCB modification required.

Q: What is the voltage tolerance for forward voltage substitution?

A: Forward voltage specifications provided in this reference are typical values at 20mA test current. Substitutes with forward voltage within ±0.2V of the original specification (2.1V ±0.2V = 1.9V to 2.3V) are electrically compatible with standard LED circuit designs. All listed orange substitutes fall within this range (1.9V to 1.98V). Yellow substitutes range from 2.0V to 2.2V, also within acceptable tolerance.

Q: Why are yellow LED parts listed as substitutes for an orange LED?

A: Yellow LED substitutes are included because they maintain identical through-hole radial package configuration, 5mm T-1 3/4 lens size, and compatible electrical characteristics (forward voltage and test current). These parts are functional substitutes where color differentiation is acceptable or where design modification to yellow indication is permissible. Selection depends on application requirements for specific color output.

Q: What is the difference between HLMP-EJ30-NR0DD and HLMP-EJ30-NR000?

A: Both parts are electrically and functionally identical orange LEDs with 1290mcd brightness, 1.98V forward voltage, and 30° viewing angle. The primary difference is packaging format: HLMP-EJ30-NR0DD is supplied in Cut Tape (CT) with 19,741 units in stock, while HLMP-EJ30-NR000 is supplied in Bulk packaging with 926 units in stock. Select based on procurement and assembly requirements.

Q: How does brightness (mcd rating) affect substitution compatibility?

A: Millicandela rating determines luminous intensity output. MV8714 specifies 1500mcd. Substitutes with lower mcd ratings (such as 5219466F at 140mcd or LTL2R3KSK at 1150mcd) produce dimmer indication. Substitutes with higher mcd ratings (such as OVLGY0C9B9 at 14,000mcd) produce brighter indication. Selection depends on application requirements for visibility and brightness level. Circuit current limiting resistor values may require adjustment for significantly different brightness levels.

Q: What does "Active" product status mean compared to "Obsolete"?

A: Active product status indicates the part is currently manufactured and available from the supplier. Obsolete status (MV8714) indicates the part is no longer manufactured. All listed substitutes have Active status, ensuring ongoing availability for production and maintenance applications. This is the primary reason substitutes are necessary for the obsolete MV8714.

Q: Are all substitutes ROHS3 compliant?

A: All listed substitutes except LTL2R3KSK are explicitly ROHS3 compliant. LTL2R3KSK has REACH Affected status, requiring compliance verification for specific applications and regions. All parts are EAR99 classified and REACH Unaffected or Affected as specified in individual part data. Verify compliance requirements for your specific application and region before final selection.

Q: Can HLMP-EJ08-WZ000 be used as a direct replacement despite higher brightness?

A: HLMP-EJ08-WZ000 maintains orange color, through-hole radial package, and compatible forward voltage (1.98V). However, the significantly higher brightness (10,750mcd vs. 1500mcd) and narrower viewing angle (8° vs. 12°) represent substantial performance differences. This part is suitable only for applications where increased luminous intensity and directional output are acceptable or required. Circuit current limiting resistor values may require adjustment.

Q: What viewing angle differences should I consider?

A: Viewing angle determines the cone of light distribution. MV8714 specifies 12° (narrow, directional output). Substitutes range from 8° (HLMP-EJ08-WZ000, OVLGY0C9B9 - very narrow, highly directional) to 30° (HLMP-EJ30-NR0DD, HLMP-EJ30-NR000, OVLFY3C7, LTL2R3KSK - wider, more diffuse output). Select based on application requirements for light distribution pattern and visibility from different viewing angles.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message