MV8410 Equivalent & Substitute Parts

Part Overview

The onsemi MV8410 is a green LED indication component in T-1 3/4 through-hole package, rated at 2.1V forward voltage with 240mcd brightness. This part is classified as obsolete, making equivalent substitutes necessary for new designs and ongoing production support. The MV8410 delivers standard green wavelength output (565nm peak) with a 12° viewing angle in a 5mm radial configuration.

Substiute Parts

MV8410

onsemiIn Stock: 1239MV8410 Datasheet

Current PartRFQ

151053GS03000

Würth ElektronikIn Stock: 3532151053GS03000 Datasheet

SimilarRFQ

SLA-570MT3F

Rohm SemiconductorIn Stock: 69147SLA-570MT3F Datasheet

SimilarRFQ

SSL-LX5093SUGC

Lumex Opto/Components Inc.In Stock: 20769SSL-LX5093SUGC Datasheet

SimilarRFQ

SSL-LX5093UPGC/D

Lumex Opto/Components Inc.In Stock: 870SSL-LX5093UPGC/D Datasheet

SimilarRFQ

XLDG12W

SunLEDIn Stock: 5920XLDG12W Datasheet

SimilarRFQ

XLM2DG12W

SunLEDIn Stock: 2300XLM2DG12W Datasheet

SimilarRFQ

MV8410

onsemiIn Stock: 1239MV8410 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MV8410 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

• Color: Green
• Lens Size: 5mm, T-1 3/4
• Lens Style: Round with Domed Top
• Lens Transparency: Clear
• Mounting Type: Through Hole
• Package / Case: Radial
• Current - Test: 20mA

Allowable Variation Parameters:

• Voltage - Forward (Vf): Range 2.1V to 3.4V (circuit design dependent)
• Millicandela Rating: 240mcd to 30000mcd (application brightness requirement dependent)
• Wavelength - Peak: 515nm to 574nm (green spectrum range)
• Viewing Angle: 12° to 30° (application field-of-view dependent)
• Height (Max): 8.60mm to 8.89mm (PCB clearance dependent)
• Product Status: Active or Not For New Designs acceptable; Obsolete status requires replacement

All substitute parts listed maintain identical mechanical form factor, electrical test conditions, and environmental compliance ratings with the MV8410.

Parameter Comparison

Engineering Selection Recommendations

For New Designs: Select from active product status parts: SSL-LX5093SUGC, SSL-LX5093UPGC/D, XLDG12W, XLM2DG12W, or 151053GS03000. All are ROHS3 compliant and carry active manufacturer support.

For Brightness-Matched Replacement: The SLA-570MT3F (470mcd) provides the closest brightness profile to the MV8410 (240mcd) among available substitutes, though it carries "Not For New Designs" status. The SSL-LX5093SUGC (1000mcd) offers moderate brightness increase with active product status.

For Low Forward Voltage Circuits: The SSL-LX5093SUGC (2.2V) and SLA-570MT3F (2.3V) maintain forward voltage closest to the original MV8410 (2.1V), minimizing circuit redesign requirements.

For High Brightness Applications: The SSL-LX5093UPGC/D (30000mcd), XLM2DG12W (18990mcd), and XLDG12W (13990mcd) deliver significantly higher luminous intensity, suitable for applications requiring enhanced visibility. These parts require circuit current-limiting verification due to elevated brightness ratings.

For Compliance-Critical Applications: All substitute parts maintain REACH Unaffected and ECCN EAR99 status consistent with the MV8410. ROHS3 compliance is available across all active-status substitutes.

Frequently Asked Questions (FAQ)

Q: Can I directly replace MV8410 with any of these substitutes without circuit modification?

A: Direct mechanical and electrical substitution is possible for parts with forward voltage within 2.1V to 2.3V range (SLA-570MT3F, SSL-LX5093SUGC). Parts with higher forward voltage (3.2V to 3.4V) require circuit current-limiting verification to prevent over-current conditions.

Q: What is the primary reason the MV8410 requires substitution?

A: The MV8410 is classified as obsolete. Substitute parts with active product status ensure long-term availability and manufacturer support for production continuity.

Q: How do brightness differences affect substitution suitability?

A: Brightness (millicandela rating) is application-dependent. The MV8410 operates at 240mcd. Substitutes range from 470mcd to 30000mcd. Higher brightness may require optical design adjustment or reduced circuit current to match original visibility performance.

Q: Are all substitutes mechanically identical to the MV8410?

A: Yes. All substitutes maintain 5mm T-1 3/4 lens size, round domed-top style, clear lens transparency, radial through-hole package, and height within 8.60mm to 8.89mm range. PCB footprint compatibility is assured.

Q: Which substitute offers the best compatibility for existing designs?

A: The SLA-570MT3F and SSL-LX5093SUGC provide closest electrical and optical matching to the MV8410. The SSL-LX5093SUGC is preferred for new designs due to active product status.

Q: Do all substitutes meet environmental and regulatory requirements?

A: All substitutes maintain REACH Unaffected and ECCN EAR99 status. ROHS3 compliance is confirmed for all active-status parts (SSL-LX5093SUGC, SSL-LX5093UPGC/D, XLDG12W, XLM2DG12W, 151053GS03000).

Q: What viewing angle differences should I consider?

A: The MV8410 has a 12° viewing angle. Substitutes range from 20° to 30°. Wider viewing angles increase light distribution but may reduce peak brightness in the forward direction. Application-specific optical requirements determine suitability.