Equivalent & Substitute Parts for MV8332 Yellow LED T-1 3/4 Through Hole

Part Overview

The MV8332 is an active yellow LED indicator manufactured by Everlight Electronics Co Ltd, designed for discrete indication applications in through-hole mounting configurations. This T-1 3/4 form factor LED operates at 2.1V forward voltage with a 20mA test current and delivers 940mcd luminous intensity through a clear domed lens. The component is ROHS3 compliant with unlimited moisture sensitivity rating, making it suitable for standard industrial and commercial applications. Equivalent and substitute parts are identified based on matching electrical characteristics, mechanical form factors, and compliance certifications to support component procurement flexibility and supply chain continuity.

Substiute Parts

MV8332

Everlight Electronics Co LtdIn Stock: 822MV8332 Datasheet

Current PartRFQ

5219466F

DialightIn Stock: 13695219466F Datasheet

SimilarRFQ

SSL-LX5093SYC

Lumex Opto/Components Inc.In Stock: 39819SSL-LX5093SYC Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MV8332 are classified based on strict alignment with the following critical parameters:

Primary Substitution Criteria:

• Color: Yellow
• Mounting Type: Through Hole
• Lens Transparency: Clear
• Voltage - Forward (Vf) Typical: 2.1V to 2.2V (within standard LED tolerance)
• Current - Test: 20mA
• Package / Case: Radial
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Secondary Compatibility Parameters:

• Lens Style: Round with Domed Top
• Configuration: Standard
• Lens Color: Colorless
• ECCN and HTSUS classifications

Substitutes are grouped into two categories:

Category 1 - Parametric Equivalent: Parts matching all primary criteria with identical or near-identical electrical and mechanical specifications.

Category 2 - Functional Substitute: Parts meeting primary criteria with minor variations in millicandela rating or viewing angle that remain within acceptable operational ranges for indication applications.

Parameter Comparison

Engineering Selection Recommendations

SSL-LX5093SYC (Lumex Opto/Components Inc.) - Parametric Equivalent

The SSL-LX5093SYC is classified as a parametric equivalent to the MV8332. This part matches all primary substitution criteria: identical forward voltage (2.1V), matching test current (20mA), identical lens size (5mm T-1 3/4), matching viewing angle (30°), and identical peak wavelength (590nm). Both parts are ROHS3 compliant with MSL rating of 1 (Unlimited). The SSL-LX5093SYC delivers 1000mcd luminous intensity compared to the MV8332's 940mcd, representing a 6.4% increase in brightness within the same form factor. Maximum height differential is 0.29mm (8.60mm vs 8.89mm), which remains within standard PCB layout tolerances. This part is suitable for direct substitution in applications where the MV8332 is specified.

5219466F (Dialight) - Functional Substitute

The 5219466F is classified as a functional substitute with noted parameter variations. This part shares the same color (yellow), lens transparency (clear), mounting type (through hole), and radial package configuration. Forward voltage is 2.2V compared to the MV8332's 2.1V, representing a 0.1V differential within standard LED operating tolerance. However, this part exhibits significant differences in optical performance: millicandela rating is 140mcd (85% lower than MV8332), viewing angle is 24° (6° narrower than MV8332), and lens size is 4.83mm diameter (slightly smaller than standard 5mm T-1 3/4). Peak wavelength is 583nm versus 590nm. The 5219466F is ROHS3 compliant with MSL 1 (Unlimited) and maintains identical ECCN and HTSUS classifications. This part is suitable for substitution only in applications where reduced brightness and narrower viewing angle are acceptable.

Both substitute parts maintain active product status and full compliance certifications matching the MV8332.

Frequently Asked Questions (FAQ)

Q1: Can the SSL-LX5093SYC replace the MV8332 in all applications?

A: The SSL-LX5093SYC is a parametric equivalent with matching electrical specifications (2.1V forward voltage, 20mA test current), identical lens size (5mm T-1 3/4), matching viewing angle (30°), and identical peak wavelength (590nm). The 6.4% increase in millicandela rating (1000mcd vs 940mcd) and 0.29mm height reduction are within standard component tolerances. This part is suitable for direct substitution in applications where the MV8332 is specified.

Q2: What are the key differences between the 5219466F and the MV8332?

A: The 5219466F differs in three primary parameters: millicandela rating (140mcd vs 940mcd), viewing angle (24° vs 30°), and lens size (4.83mm vs 5mm T-1 3/4). Forward voltage is 2.2V versus 2.1V, a 0.1V difference within standard LED tolerance. Peak wavelength is 583nm versus 590nm. These differences make the 5219466F suitable only for applications where reduced brightness and narrower viewing angle are acceptable.

Q3: Are all substitute parts ROHS3 compliant?

A: Yes. Both the SSL-LX5093SYC and 5219466F are ROHS3 compliant, matching the MV8332's compliance status. All three parts carry MSL rating of 1 (Unlimited) and identical ECCN (EAR99) and HTSUS (8541.41.0000) classifications.

Q4: What is the significance of the 0.1V forward voltage difference in the 5219466F?

A: The 5219466F operates at 2.2V forward voltage compared to the MV8332's 2.1V. This 0.1V difference falls within standard LED manufacturing tolerance and does not require circuit redesign. However, this part should be selected only when its reduced brightness (140mcd) and narrower viewing angle (24°) are compatible with the application requirements.

Q5: Which substitute part should be selected for direct replacement?

A: The SSL-LX5093SYC is the recommended parametric equivalent for direct replacement. It matches all critical electrical and mechanical parameters of the MV8332, including forward voltage (2.1V), test current (20mA), lens size (5mm T-1 3/4), viewing angle (30°), and peak wavelength (590nm). The 5219466F should be selected only when its specific optical characteristics (reduced brightness and narrower viewing angle) are required by the application.

Q6: Are there any height or form factor considerations when substituting these parts?

A: Maximum heights are: MV8332 (8.89mm), 5219466F (8.81mm), and SSL-LX5093SYC (8.60mm). All three parts use radial through-hole mounting with round domed lens tops. Height differences of 0.08mm to 0.29mm are within standard PCB layout tolerances and do not require mechanical redesign. Lens sizes differ slightly: MV8332 and SSL-LX5093SYC are standard 5mm T-1 3/4, while 5219466F is 4.83mm diameter.

Q7: What inventory levels are available for each part?

A: Current inventory levels are: MV8332 (745 pcs), 5219466F (1273 pcs), and SSL-LX5093SYC (39797 pcs). All parts are listed as new original stock in active product status.