MV64538MP6 Equivalent & Substitute Parts

Part Overview

The MV64538MP6 is an LED Circuit Board Indicator manufactured by onsemi, featuring a single green diffused lens in a 5mm T-1 3/4 through-hole right-angle configuration. This component is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement continuity. The part operates at 2.2V with a 20mA current rating and delivers 26mcd luminous intensity at a 65° viewing angle.

Substiute Parts

MV64538MP6

onsemiIn Stock: 814MV64538MP6 Datasheet

Current PartRFQ

MV64539MP7

onsemiIn Stock: 908MV64539MP7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MV64538MP6 is determined by strict alignment across the following critical parameters:

• Color: Green
• Configuration: Single LED
• Current Rating: 20mA
• Voltage Rating: 2.2V
• Mounting Type: Through Hole, Right Angle
• Lens Type: Diffused, Tinted
• Base Product Series: MV645

The MV64539MP7 qualifies as a direct substitute based on matching all mandatory electrical and mechanical parameters. Variations in millicandela rating (28mcd vs. 26mcd) and lens style designation remain within acceptable tolerance for circuit board indicator applications where luminous intensity is not a critical design constraint.

Parameter Comparison

Engineering Selection Recommendations

Both the MV64538MP6 and MV64539MP7 share identical compliance certifications and regulatory status. Both components are classified as obsolete and carry REACH Unaffected designation with EAR99 export classification. The MV64539MP7 provides equivalent electrical performance with a marginal increase in luminous intensity (28mcd vs. 26mcd), maintaining full compatibility with existing circuit board indicator designs. Selection between these parts should be based on current inventory availability and procurement lead times, as functional equivalence is established across all critical parameters.

Frequently Asked Questions (FAQ)

Q: Can MV64539MP7 be used as a direct replacement for MV64538MP6?

A: Yes. Both parts share identical electrical ratings (2.2V, 20mA), mounting configuration (through-hole right angle), lens characteristics (diffused, tinted green), and viewing angle (65°). The millicandela rating difference (28mcd vs. 26mcd) does not affect circuit board indicator functionality.

Q: Are there mechanical compatibility concerns when substituting these parts?

A: No. Both components feature 5mm T-1 3/4 lens sizes and right-angle through-hole mounting, ensuring identical PCB footprint and installation requirements.

Q: What is the significance of the MSL-1 rating for both parts?

A: MSL-1 (Unlimited) indicates these components have no moisture sensitivity limitations and require no special storage or handling precautions during assembly.

Q: Why are both parts classified as obsolete?

A: Obsolete status indicates these components are no longer in active production by onsemi. Substitute parts should be sourced from available inventory while stock remains available.

Q: Do both parts comply with the same regulatory standards?

A: Yes. Both MV64538MP6 and MV64539MP7 carry identical REACH Unaffected status and EAR99 export classification, ensuring equivalent regulatory compliance for international applications.