MV64530 LED Green Diffused T-1 3/4 Through Hole - Equivalent & Substitute Parts

Part Overview

The MV64530 is a green diffused LED indicator in T-1 3/4 (5mm) through-hole package manufactured by onsemi. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The part delivers green indication at 2.2V forward voltage with 20mcd brightness and 75° viewing angle, suitable for standard LED indication applications in electronic equipment.

Substiute Parts

MV64530

onsemiIn Stock: 1092MV64530 Datasheet

Current PartRFQ

4302H5-12V

Visual Communications Company - VCCIn Stock: 19244302H5-12V Datasheet

SimilarRFQ

4302H5-5V

Visual Communications Company - VCCIn Stock: 27824302H5-5V Datasheet

SimilarRFQ

WP7113SGD

KingbrightIn Stock: 17112WP7113SGD Datasheet

SimilarRFQ

MV5453

onsemiIn Stock: 1123MV5453 Datasheet

Parametric EquivalentRFQ

MV5453A3R0

Everlight Electronics Co LtdIn Stock: 1219MV5453A3R0 Datasheet

Parametric EquivalentRFQ

MV5453A4A0

Everlight Electronics Co LtdIn Stock: 941MV5453A4A0 Datasheet

Parametric EquivalentRFQ

MV64530

onsemiIn Stock: 1092MV64530 Datasheet

Parametric EquivalentRFQ

MV64531

onsemiIn Stock: 1102MV64531 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MV64530 is determined by the following critical parameters:

Primary Substitution Criteria:

• Color: Green
• Lens Transparency: Diffused
• Lens Size: 5mm, T-1 3/4
• Mounting Type: Through Hole
• Package / Case: Radial
• Voltage - Forward (Vf) Typical: 2.2V
• Current - Test: 20mA

Secondary Compatibility Parameters:

• Millicandela Rating: 20mcd (allows tolerance variation)
• Viewing Angle: 75° (allows tolerance variation)
• Wavelength - Peak: 562nm (allows tolerance variation within green spectrum)
• Height (Max): 8.89mm (allows tolerance variation)

Substitute parts are grouped into two categories:

Category 1: Parametric Equivalents - Parts matching all primary substitution criteria with identical electrical and mechanical specifications. These include MV5453A4A0 (Everlight), MV5453A3R0 (Everlight), MV64531 (onsemi), and MV5453 (onsemi).

Category 2: Functional Substitutes - Parts with different forward voltage specifications (4302H5-5V, 4302H5-12V from VCC) or different brightness/viewing angle characteristics (WP7113SGD from Kingbright) that maintain the same physical form factor and green diffused lens configuration but require circuit design consideration for voltage compatibility.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (No Circuit Modification Required):

MV5453A4A0 and MV5453A3R0 from Everlight Electronics are the primary recommended substitutes. Both parts are active products with ROHS3 compliance and match all electrical and mechanical parameters of the MV64530. These parts provide design continuity with identical forward voltage (2.2V), test current (20mA), brightness (20mcd), and viewing angle (75°). Both are available in bulk packaging with substantial inventory.

For Applications Requiring Active Product Status:

If procurement of active products is mandatory, the Everlight parts (MV5453A4A0, MV5453A3R0) are the only direct parametric equivalents currently in active production status. These parts eliminate obsolescence risk while maintaining full electrical and mechanical compatibility.

For Alternative Voltage Specifications:

WP7113SGD from Kingbright maintains 2.2V forward voltage compatibility but delivers higher brightness (40mcd) and narrower viewing angle (30°). This part is suitable only for applications where increased brightness and directional output are acceptable design changes.

The 4302H5-5V and 4302H5-12V from VCC require circuit redesign due to different forward voltage specifications (5V and 12V respectively) and are not recommended as direct substitutes without corresponding power supply and current-limiting resistor modifications.

Frequently Asked Questions (FAQ)

Q: Can MV5453A4A0 or MV5453A3R0 be used as direct replacements for MV64530 without circuit modification?

A: Yes. Both Everlight parts match the MV64530 in all critical parameters: 2.2V forward voltage, 20mA test current, 20mcd brightness, 75° viewing angle, and T-1 3/4 through-hole package. No circuit changes are required.

Q: What is the difference between MV5453A4A0 and MV5453A3R0?

A: Both parts are parametrically identical. The difference lies in packaging designation and supplier lot tracking. Both are manufactured by Everlight Electronics and meet identical electrical and mechanical specifications.

Q: Why is WP7113SGD not recommended as a direct substitute despite matching forward voltage?

A: While WP7113SGD maintains 2.2V forward voltage, it differs in brightness (40mcd vs. 20mcd) and viewing angle (30° vs. 75°). These differences alter the optical performance characteristics and may not be suitable for applications designed around the original 20mcd, 75° specification.

Q: Can 4302H5-5V or 4302H5-12V replace the MV64530?

A: No, not without circuit redesign. These parts operate at 5V and 12V forward voltage respectively, compared to the MV64530's 2.2V specification. Substitution requires modification of power supply voltage and current-limiting resistor values.

Q: What is the physical compatibility of substitute parts?

A: All recommended substitutes use the same T-1 3/4 (5mm) through-hole radial package. Physical board layout compatibility is maintained. Height variations (8.60mm to 10.08mm maximum) are within standard PCB assembly tolerances for through-hole components.

Q: Are the Everlight substitute parts RoHS compliant?

A: Yes. MV5453A4A0 and MV5453A3R0 are both ROHS3 compliant, meeting current environmental and regulatory requirements. The original MV64530 does not specify RoHS status.

Q: What inventory status should influence part selection?

A: MV5453A4A0 and MV5453A3R0 are active products with 909 and 1190 units in stock respectively. WP7113SGD has the highest inventory at 17,035 units. Selection should prioritize active products to ensure long-term supply continuity and avoid future obsolescence issues.