MV63539MP7 LED Circuit Board Indicator - Equivalent & Substitute Parts

Part Overview

The MV63539MP7 is a yellow LED circuit board indicator manufactured by Everlight Electronics Co Ltd. This component is a single yellow LED with a 5mm round domed top lens, designed for through-hole right-angle mounting on circuit boards. The device operates at 2.1V with a 20mA current rating and is commonly used in indicator applications requiring standard brightness output.

The MV63539MP7 remains in active inventory with 1123 pieces in stock. Substitute parts may be required due to supply chain considerations, design optimization, or specific application requirements where alternative lens characteristics or manufacturer sourcing is preferred.

Substiute Parts

MV63539MP7

Everlight Electronics Co LtdIn Stock: 1208MV63539MP7 Datasheet

Current PartRFQ

MV63539MP6

onsemiIn Stock: 831MV63539MP6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MV63539MP7 is determined by the following critical parameters that must remain constant across equivalent parts:

Core Electrical Parameters:

• Voltage Rating: 2.1V
• Current Rating: 20mA
• Color: Yellow

Core Mechanical Parameters:

• Lens Size: 5mm, T-1 3/4
• Mounting Type: Through Hole, Right Angle
• Configuration: Single

Allowable Variations:

• Lens Type: Diffused or standard clear lens variants are acceptable
• Millicandela Rating: Variations within standard brightness classifications for yellow indicators
• Viewing Angle: Variations within typical LED specifications

The substitute part MV63539MP6 meets all core electrical and mechanical requirements while introducing a diffused, tinted lens variant. This represents a functional equivalent suitable for applications where lens diffusion characteristics do not impact circuit board indicator performance.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: MV63539MP7

The MV63539MP7 remains the preferred component for new designs and production applications. This part is manufactured by Everlight Electronics Co Ltd and maintains active inventory status with 1123 units available. The component meets all standard circuit board indicator requirements with established supply chain reliability.

Alternative Selection: MV63539MP6

The MV63539MP6 manufactured by onsemi is electrically and mechanically equivalent to the MV63539MP7. Both components share identical voltage ratings (2.1V), current specifications (20mA), lens dimensions (5mm T-1 3/4), and mounting configurations (through-hole right angle). The primary distinction is the diffused, tinted lens characteristic of the MV63539MP6, which provides light diffusion compared to the standard lens of the MV63539MP7.

Important Consideration: The MV63539MP6 carries an obsolete product status designation. This status indicates that onsemi has discontinued active production and support for this component. While existing inventory of 723 units is currently available, future procurement may face supply constraints. Selection of the MV63539MP6 should be limited to applications where existing stock fulfills immediate requirements or where the diffused lens characteristic provides specific functional benefit.

Compliance Status: Both components are REACH Unaffected and classified under ECCN EAR99, indicating standard commercial availability without export restrictions. Moisture Sensitivity Level (MSL) is rated at 1 (Unlimited) for both parts, indicating no special moisture handling requirements during storage or assembly.

Frequently Asked Questions (FAQ)

Q: Can MV63539MP6 be used as a direct replacement for MV63539MP7 in existing circuit board designs?

A: Yes, the MV63539MP6 is electrically and mechanically compatible with the MV63539MP7. Both components operate at 2.1V with 20mA current ratings and share identical 5mm T-1 3/4 through-hole right-angle mounting specifications. The diffused, tinted lens of the MV63539MP6 will alter the light diffusion characteristics compared to the standard lens of the MV63539MP7, but this does not affect electrical compatibility or circuit board mounting.

Q: What is the significance of the "Obsolete" product status for MV63539MP6?

A: Obsolete status indicates that onsemi has discontinued active manufacturing and long-term support for the MV63539MP6. While 723 units are currently in stock, future availability cannot be guaranteed. For production designs requiring long-term component supply, the MV63539MP7 is the recommended choice due to its active status with Everlight Electronics Co Ltd.

Q: Are there differences in brightness output between MV63539MP7 and MV63539MP6?

A: The MV63539MP6 is specified at 20mcd (millicandela) with a 65° viewing angle. The MV63539MP7 specifications for millicandela rating and viewing angle are not provided in the available technical data. Both components operate at identical voltage and current ratings (2.1V, 20mA), which are the primary determinants of LED brightness output. The diffused, tinted lens of the MV63539MP6 may distribute light differently across the viewing angle compared to the standard lens of the MV63539MP7.

Q: What are the key parameters that determine substitution eligibility for yellow 5mm through-hole LEDs?

A: Substitution eligibility is determined by: voltage rating (2.1V), current rating (20mA), color (yellow), lens size (5mm T-1 3/4), lens style (round with domed top), mounting type (through-hole right angle), and configuration (single). Variations in lens type (diffused versus standard), millicandela rating, and viewing angle are allowable within standard circuit board indicator applications.

Q: What is the HTSUS classification for these components?

A: Both MV63539MP7 and MV63539MP6 fall under HTSUS classification 8541.41.0000, which covers light-emitting diodes (LEDs) for commercial and industrial applications.

Q: Are special handling procedures required for these LED components?

A: No special moisture handling procedures are required. Both components are rated at Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating that standard storage and assembly conditions are sufficient without specialized moisture control measures.