MV6053 Red Diffused T-1 3/4 LED Equivalent & Substitute Parts

Part Overview

The MV6053 is a red diffused T-1 3/4 through-hole LED manufactured by Everlight Electronics Co Ltd, designed for red indication applications in discrete 2.2V radial configurations. This component is currently in active product status with 951 pieces in stock inventory. The MV6053 operates at a forward voltage of 2.2V with a 20mA test current, delivering 0.5mcd luminous intensity through an 80° viewing angle. The diffused red lens with round domed top provides uniform light distribution suitable for indicator applications.

Equivalent and substitute parts are necessary when the MV6053 becomes unavailable, when alternative manufacturers are required for supply chain diversification, or when design modifications require different electrical characteristics while maintaining mechanical compatibility with T-1 3/4 through-hole mounting.

Key Parameters

Parameter	MV6053 Value	Substitution Relevance
Lens Size	5mm, T-1 3/4	Critical - Determines mechanical fit in PCB mounting holes
Mounting Type	Through Hole	Critical - Defines board assembly compatibility
Lens Transparency	Diffused	Critical - Affects light distribution pattern
Color	Red	Critical - Determines wavelength and visual indication
Voltage - Forward (Vf) (Typ)	2.2V	Important - Affects circuit design and current limiting requirements
Current - Test	20mA	Important - Defines operating current specification
Millicandela Rating	0.5mcd	Important - Determines brightness level for indication purposes
Viewing Angle	80°	Important - Affects visibility range
Wavelength - Peak	660nm	Important - Specifies red color wavelength
Package / Case	Radial	Critical - Determines lead configuration
Height (Max)	8.89mm	Important - Affects PCB clearance and assembly
RoHS Status	ROHS3 Compliant	Important - Regulatory compliance requirement

Substitute Part Grouping Explanation

Substitute parts for the MV6053 are classified into two categories based on parameter alignment:

Parametric Equivalent: Parts that match all critical parameters (lens size T-1 3/4, through-hole mounting, diffused red lens, radial package) and maintain electrical compatibility within acceptable design tolerances.

Similar Parts: Components that share the same mechanical form factor (T-1 3/4 through-hole red diffused LED) but differ in one or more electrical parameters such as forward voltage, test current, millicandela rating, or viewing angle. These parts require circuit design verification before substitution.

The substitution logic is based strictly on the following parameters:

Lens Size: 5mm T-1 3/4 (mechanical compatibility)
Mounting Type: Through Hole (assembly compatibility)
Lens Transparency: Diffused (optical performance)
Color: Red (functional requirement)
Package Type: Radial (lead configuration)
Compliance: ROHS3 status (regulatory requirement)

Electrical parameters (Vf, test current, mcd rating, viewing angle, wavelength) determine whether a substitute requires circuit redesign or can be used as a direct replacement.

Parameter Comparison

Parameter	MV6053 (Everlight)	MV5053 (onsemi)	151051RS11000 (Würth)	4302H1-5V (VCC)	HLMP-3301 (Broadcom)
Manufacturer	Everlight Electronics	onsemi	Würth Elektronik	Visual Communications Company	Broadcom Limited
Product Status	Active	Obsolete	Active	Active	Active
Color	Red	Red	Red	Red	Red
Lens Transparency	Diffused	Diffused	Diffused	Diffused	Diffused
Lens Size	5mm, T-1 3/4	5mm, T-1 3/4	4.90mm Dia	5mm, T-1 3/4	5mm, T-1 3/4
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Voltage - Forward (Vf) (Typ)	2.2V	2.2V	2.1V	5V	1.9V
Current - Test	20mA	20mA	20mA	10mA	10mA
Millicandela Rating	0.5mcd	0.5mcd	30mcd	8mcd	5.4mcd
Viewing Angle	80°	80°	60°	60°	60°
Wavelength - Peak	660nm	660nm	650nm	635nm	635nm
Height (Max)	8.89mm	8.89mm	8.95mm	10.08mm	9.19mm
Package / Case	Radial	Radial	Radial	Radial	Radial
RoHS Status	ROHS3 Compliant	REACH Unaffected	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Inventory Status	951 Pcs In Stock	749 Pcs In Stock	3373 Pcs In Stock	2640 Pcs In Stock	28097 Pcs In Stock

Engineering Selection Recommendations

Direct Parametric Equivalent:

The MV5053 manufactured by onsemi is a parametric equivalent to the MV6053. Both components share identical electrical specifications (2.2V forward voltage, 20mA test current, 0.5mcd rating, 80° viewing angle, 660nm peak wavelength) and mechanical form factor (5mm T-1 3/4 through-hole radial package, 8.89mm maximum height). However, the MV5053 is listed as obsolete product status. Selection of the MV5053 should be limited to applications where existing inventory must be consumed or where long-term supply agreements exist. For new designs, the active-status MV6053 is preferred.

Similar Parts Requiring Circuit Verification:

The HLMP-3301 series from Broadcom Limited (including HLMP-3301, HLMP-3301-D0000, HLMP-3301-D0002, and HLMP-3301-F0002) maintains mechanical compatibility with the MV6053 but operates at a lower forward voltage (1.9V versus 2.2V) and lower test current (10mA versus 20mA). The millicandela rating varies between 2.1mcd and 5.4mcd depending on the specific variant. These parts are suitable substitutes when circuit design accommodates the reduced forward voltage and current requirements. All HLMP-3301 variants are active products with ROHS3 compliance and substantial inventory availability (6,700 to 34,884 pieces).

The 4302H1-5V from Visual Communications Company operates at 5V forward voltage with 10mA test current and 8mcd brightness. This part requires significant circuit redesign and is suitable only for applications where 5V operation is specified. The 4302H1-5V is an active product with ROHS3 compliance and 2,640 pieces in stock.

The 151051RS11000 from Würth Elektronik (WL-TMRC series) has a slightly smaller lens diameter (4.90mm versus 5mm) and operates at 2.1V forward voltage with 30mcd brightness and 60° viewing angle. This part may require PCB mounting hole verification due to the reduced lens diameter and is suitable for applications requiring higher brightness. The part is active with ROHS3 compliance and 3,373 pieces in stock.

Compliance Considerations:

All recommended substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the MV6053 regulatory profile. The MV5053 is REACH Unaffected rather than ROHS3 Compliant; this distinction should be verified against specific procurement requirements.

Frequently Asked Questions (FAQ)

Q: Can the MV5053 be used as a direct replacement for the MV6053?

A: Yes, the MV5053 is a parametric equivalent with identical electrical and mechanical specifications. However, the MV5053 is obsolete product status. Direct replacement is possible from existing inventory, but new designs should specify the active-status MV6053.

Q: What is the primary difference between the MV6053 and HLMP-3301 series?

A: The HLMP-3301 operates at 1.9V forward voltage and 10mA test current compared to the MV6053's 2.2V and 20mA. The HLMP-3301 brightness ranges from 2.1mcd to 5.4mcd versus the MV6053's 0.5mcd. Both maintain the same T-1 3/4 through-hole mechanical form factor. Circuit design must be verified to accommodate the lower voltage and current specifications.

Q: Is the 151051RS11000 from Würth Elektronik mechanically compatible with the MV6053?

A: The 151051RS11000 has a slightly smaller lens diameter (4.90mm versus 5mm) and greater maximum height (8.95mm versus 8.89mm). PCB mounting hole compatibility should be verified. The part is otherwise mechanically similar with through-hole radial mounting.

Q: Can the 4302H1-5V replace the MV6053 in existing designs?

A: The 4302H1-5V requires significant circuit redesign due to its 5V forward voltage specification versus the MV6053's 2.2V. This part is suitable only for new designs specified for 5V LED operation. Direct substitution in existing 2.2V circuits is not recommended without circuit modification.

Q: What viewing angle differences exist between the MV6053 and substitute parts?

A: The MV6053 provides an 80° viewing angle. The HLMP-3301 series, 4302H1-5V, and 151051RS11000 all specify 60° viewing angles. Applications requiring the wider 80° viewing angle should verify that the reduced 60° angle is acceptable for the intended indication function.

Q: Are all substitute parts ROHS3 compliant?

A: The MV6053, 151051RS11000, 4302H1-5V, and all HLMP-3301 variants are ROHS3 compliant. The MV5053 is listed as REACH Unaffected rather than ROHS3 Compliant. Procurement specifications should clarify which compliance standard is required.

Q: Which substitute part has the highest brightness rating?

A: The 151051RS11000 from Würth Elektronik provides 30mcd brightness, significantly higher than the MV6053's 0.5mcd. The HLMP-3301 series ranges from 2.1mcd to 5.4mcd, and the 4302H1-5V provides 8mcd. Selection should be based on the specific brightness requirement for the indication application.

Q: What is the inventory availability for each substitute part?

A: MV5053: 749 pieces; 151051RS11000: 3,373 pieces; 4302H1-5V: 2,640 pieces; HLMP-3301: 28,097 pieces (base part); HLMP-3301-D0000: 34,884 pieces; HLMP-3301-D0002: 6,900 pieces; HLMP-3301-F0002: 6,700 pieces. The HLMP-3301 series offers the highest inventory availability.

Q: Do all parts use the same radial package configuration?

A: Yes, all listed parts use radial through-hole packages suitable for standard PCB assembly. The mechanical form factor is consistent across all substitutes, with minor variations in maximum height (8.89mm to 10.08mm) that should be verified against PCB clearance requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message