MV5764MP4A LED Circuit Board Indicator Equivalent & Substitute Parts

Part Overview

The MV5764MP4A is a single red diffused LED circuit board indicator manufactured by onsemi, designed for through-hole, right-angle mounting applications. This component is classified as obsolete, making identification of functionally equivalent substitute parts essential for ongoing design support and production continuity. The 3mm T-1 form factor with 2V rating and 10mA current specification defines the operational envelope for compatible alternatives.

Substiute Parts

MV5764MP4A

onsemiIn Stock: 837MV5764MP4A Datasheet

Current PartRFQ

SSF-LXHM250IGIGW

Lumex Opto/Components Inc.In Stock: 17652SSF-LXHM250IGIGW Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MV5764MP4A requires evaluation against the following critical parameters: color specification, mounting configuration (through-hole, right-angle), lens form factor, voltage and current ratings, and compliance certifications. The SSF-LXHM250IGIGW from Lumex Opto/Components Inc. is listed as a substitute option. However, this part exhibits significant parameter deviations that must be evaluated for application compatibility:

Key Substitution Parameters:

• Mounting Type: Through Hole, Right Angle (common to both)
• Viewing Angle: 60° (common to both)
• MSL Rating: 1 (Unlimited) (common to both)
• REACH Status: REACH Unaffected (common to both)

Parameter Deviations in SSF-LXHM250IGIGW:

• Configuration: 2 High (vs. Single)
• Color: Green, Red (x 2) (vs. Single Red)
• Current Rating: 20mA (vs. 10mA)
• Voltage Rating: 2.2V Green, 2V Red (vs. 2V)
• Lens Size: 5mm, T-1 3/4 (vs. 3mm, T-1)
• Millicandela Rating: 25mcd Green, 30mcd Red (vs. 2mcd)

Parameter Comparison

Engineering Selection Recommendations

The SSF-LXHM250IGIGW is listed as a substitute for the obsolete MV5764MP4A; however, direct substitution requires careful circuit-level evaluation due to parameter deviations. The substitute part is in active production status, ensuring long-term availability and supply chain continuity compared to the obsolete original.

Compliance considerations favor the SSF-LXHM250IGIGW: it carries ROHS3 certification and maintains REACH Unaffected status, matching the regulatory profile of the original part. Both components share identical MSL ratings and viewing angles, supporting environmental and optical compatibility in standard applications.

The primary engineering constraints for substitution are: (1) the larger 5mm form factor versus 3mm original, requiring PCB layout modification; (2) the dual-color, dual-LED configuration versus single red LED, necessitating circuit redesign if single-color indication is required; (3) the 20mA current rating versus 10mA original, requiring current-limiting resistor recalculation; and (4) the higher millicandela ratings (25mcd/30mcd versus 2mcd), which may require optical diffusion or brightness management in the application.

Frequently Asked Questions (FAQ)

Q: Can the SSF-LXHM250IGIGW be used as a direct pin-for-pin replacement for the MV5764MP4A?

A: No. While both components feature through-hole, right-angle mounting, the SSF-LXHM250IGIGW is a dual-LED, dual-color assembly (2 High configuration) versus the single red LED of the MV5764MP4A. Physical form factor differs (5mm T-1 3/4 versus 3mm T-1), and pin configuration will differ accordingly. PCB layout and circuit redesign are required.

Q: What are the key electrical differences between these parts?

A: The MV5764MP4A operates at 2V with 10mA current and produces 2mcd brightness. The SSF-LXHM250IGIGW requires 20mA current (double the original) and produces 25mcd (green) and 30mcd (red) brightness levels. The red channel voltage rating is compatible at 2V, but the green channel operates at 2.2V. Current-limiting resistor values must be recalculated for the higher current specification.

Q: Are there compliance or regulatory differences?

A: Both parts maintain REACH Unaffected status and MSL 1 (Unlimited) ratings. The SSF-LXHM250IGIGW carries explicit ROHS3 compliance certification, whereas the MV5764MP4A does not specify RoHS status. For applications requiring RoHS compliance, the substitute part provides documented certification.

Q: What is the primary reason to consider substitution?

A: The MV5764MP4A is classified as obsolete, creating supply chain risk for new production or design revisions. The SSF-LXHM250IGIGW is in active production status, ensuring availability and long-term support from the manufacturer.

Q: Will the larger lens size (5mm versus 3mm) affect application performance?

A: Yes. The 5mm form factor is physically larger and will not fit into PCB cutouts or mechanical assemblies designed for 3mm T-1 components. Mechanical redesign of the mounting interface is required. The identical 60° viewing angle supports optical compatibility for indication purposes, but brightness levels are significantly higher and may require optical management.