MV5760 LED Red Clear T-1 T/H Equivalent & Substitute Parts

Part Overview

The MV5760 is a red LED indication component in T-1 through-hole radial package, manufactured by onsemi. This discrete 2V LED features a 3mm domed lens with 12mcd brightness rating and 635nm peak wavelength. The product is currently obsolete, making equivalent substitute parts necessary for ongoing design support and component sourcing.

Substiute Parts

MV5760

onsemiIn Stock: 960MV5760 Datasheet

Current PartRFQ

HLMP-1321

Broadcom LimitedIn Stock: 2471HLMP-1321 Datasheet

SimilarRFQ

HLMP-1340

Broadcom LimitedIn Stock: 2168HLMP-1340 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MV5760 is determined by the following critical parameters: red color, 3mm T-1 through-hole radial package, domed lens configuration, and compatible forward voltage range. The substitute parts HLMP-1321 and HLMP-1340 maintain the same physical package, mounting type, and lens geometry. Both substitutes operate at 1.9V forward voltage, which is within acceptable tolerance for circuits designed for the 2V MV5760. The substitutes are manufactured by Broadcom Limited and carry active product status with RoHS3 compliance, providing long-term availability and regulatory alignment.

Parameter Comparison

Engineering Selection Recommendations

Both HLMP-1321 and HLMP-1340 are suitable substitutes for the obsolete MV5760 based on package compatibility and electrical parameters. The HLMP-1321 provides a direct brightness match at 30mcd with 10mA test current and maintains the 45° viewing angle of the original part. The HLMP-1340 offers higher brightness at 55mcd but operates at 20mA test current and features a narrower 24° viewing angle. Selection between these substitutes depends on circuit current capability and application viewing angle requirements. Both substitutes carry active product status and RoHS3 compliance, ensuring regulatory compliance and long-term supply availability.

Frequently Asked Questions (FAQ)

Q: Can HLMP-1321 and HLMP-1340 be used interchangeably with MV5760?

A: Both parts are mechanically and electrically compatible as substitutes. The forward voltage difference (1.9V vs 2V) is within acceptable tolerance for most circuit designs. Selection between the two substitutes depends on brightness requirements and viewing angle specifications for the application.

Q: What is the impact of the 0.1V forward voltage difference?

A: The 0.1V difference between MV5760 (2V) and the substitutes (1.9V) is negligible in most applications. Circuits designed for the MV5760 will operate the substitute parts within normal parameters.

Q: How do brightness ratings affect substitution?

A: The MV5760 operates at 12mcd. HLMP-1321 provides 30mcd at 10mA, and HLMP-1340 provides 55mcd at 20mA. Higher brightness may be acceptable depending on application requirements. Verify that increased brightness does not create visual or functional issues in the target application.

Q: Are there viewing angle considerations for substitution?

A: The MV5760 and HLMP-1321 both feature 45° viewing angles. The HLMP-1340 has a narrower 24° viewing angle. Applications requiring wide-angle visibility should use HLMP-1321 or verify that the narrower angle of HLMP-1340 is acceptable.

Q: What are the compliance differences between these parts?

A: HLMP-1321 and HLMP-1340 are both RoHS3 compliant with active product status. The MV5760 is obsolete. The active status of the Broadcom substitutes ensures continued availability and regulatory alignment for new designs.

Q: Are the physical dimensions compatible?

A: All three parts use the 3mm T-1 through-hole radial package. Maximum heights are 6.30mm (MV5760) and 6.35mm (both Broadcom parts), representing negligible differences suitable for standard PCB layouts.