Equivalent & Substitute Parts for MV5760

Part Overview

The MV5760 is a red diffused LED in T-1 (3mm) through-hole package manufactured by Everlight Electronics Co Ltd. This discrete indication LED operates at 2V forward voltage with a 12mcd brightness rating and 45° viewing angle. The part is Active status and RoHS3 compliant. Substitute parts are identified to provide alternatives with comparable electrical and mechanical characteristics for applications requiring equivalent red LED indication functionality in T-1 through-hole configurations.

Substiute Parts

MV5760

Everlight Electronics Co LtdIn Stock: 1055MV5760 Datasheet

Current PartRFQ

HLMP-1321

Broadcom LimitedIn Stock: 2471HLMP-1321 Datasheet

SimilarRFQ

HLMP-1340

Broadcom LimitedIn Stock: 2168HLMP-1340 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MV5760 are qualified based on the following criteria:

Mandatory Matching Parameters:

• Color: Red
• Lens Size: 3mm, T-1
• Mounting Type: Through Hole
• Package / Case: Radial
• Peak Wavelength: 635nm
• RoHS Status: ROHS3 Compliant
• Product Status: Active

Allowable Variation Parameters:

• Lens Transparency: Diffused (main part) vs. Clear (substitutes) — both are standard optical configurations for T-1 LEDs
• Voltage - Forward (Vf): 2V (main part) vs. 1.9V (substitutes) — within typical forward voltage tolerance for red LEDs
• Millicandela Rating: 12mcd to 55mcd — brightness variation acceptable based on application requirements
• Viewing Angle: 24° to 45° — dependent on lens transparency and optical design
• Current - Test: 10mA to 20mA — standard test conditions for LED characterization
• Height (Max): 6.30mm to 6.35mm — negligible mechanical difference

The substitute parts HLMP-1321 and HLMP-1340 maintain electrical and mechanical compatibility within standard T-1 LED specifications.

Parameter Comparison

Engineering Selection Recommendations

MV5760 (Primary Part): Use when diffused lens optical characteristics are required. Forward voltage of 2V and 12mcd brightness are specified for the application. All parts maintain Active product status and ROHS3 compliance.

HLMP-1321 (Broadcom Limited): Substitute when clear lens transparency is acceptable. Forward voltage of 1.9V is compatible with standard LED circuit designs. 30mcd brightness provides increased luminous intensity compared to MV5760. 45° viewing angle matches the primary part. Suitable for applications where higher brightness is beneficial without optical diffusion.

HLMP-1340 (Broadcom Limited): Substitute when higher brightness (55mcd) and narrower viewing angle (24°) are required. Forward voltage of 1.9V and 20mA test current are within standard LED operating parameters. Clear lens configuration provides direct light output. Appropriate for applications requiring focused light emission and increased intensity.

All three parts are Active status, RoHS3 compliant, and mechanically compatible in T-1 through-hole PCB applications.

Frequently Asked Questions (FAQ)

Q: Can HLMP-1321 or HLMP-1340 directly replace MV5760 in existing designs?

A: Both Broadcom parts are mechanically and electrically compatible as through-hole T-1 radial package LEDs. The primary difference is lens transparency (clear vs. diffused) and brightness rating. Circuit designs using 2V forward voltage tolerance and 10mA current will function with the 1.9V forward voltage of the Broadcom parts. Verify that the application can accommodate the brightness difference (12mcd vs. 30mcd or 55mcd).

Q: What is the difference between diffused and clear lens transparency?

A: MV5760 features a diffused lens that scatters light output over a wider area, providing uniform brightness across the 45° viewing angle. HLMP-1321 and HLMP-1340 have clear lenses that transmit light more directly. HLMP-1340's narrower 24° viewing angle reflects the focused light output of a clear lens design.

Q: Are there forward voltage compatibility concerns?

A: MV5760 operates at 2V typical forward voltage, while HLMP-1321 and HLMP-1340 operate at 1.9V. This 0.1V difference is within normal LED manufacturing tolerance and standard circuit design margins. Existing current-limiting resistor calculations may require minor adjustment for optimal brightness.

Q: Do all three parts meet the same compliance standards?

A: Yes. MV5760, HLMP-1321, and HLMP-1340 are all RoHS3 compliant, Active product status, and rated for unlimited moisture sensitivity (MSL 1). All parts carry EAR99 ECCN classification and 8541.41.0000 HTSUS code.

Q: Which part should be selected for maximum brightness?

A: HLMP-1340 provides the highest brightness at 55mcd. This part operates at 20mA test current and features a 24° viewing angle, concentrating light output in a narrower beam compared to the 45° angle of MV5760 and HLMP-1321.

Q: Are there mechanical height differences?

A: MV5760 has a maximum height of 6.30mm, while both Broadcom parts (HLMP-1321 and HLMP-1340) have a maximum height of 6.35mm. This 0.05mm difference is negligible for standard through-hole PCB applications and does not affect mechanical fit or clearance in typical designs.