MV54919MP7 Equivalent & Substitute Parts

Part Overview

The MV54919MP7 is a LED Circuit Board Indicator manufactured by onsemi, featuring a single green and red diffused, tinted lens in a 5mm T-1 3/4 through-hole right-angle configuration. This component is classified as obsolete, making identification of suitable equivalent parts essential for ongoing system support and component procurement.

Substiute Parts

MV54919MP7

onsemiIn Stock: 868MV54919MP7 Datasheet

Current PartRFQ

MV54919MP6

onsemiIn Stock: 733MV54919MP6 Datasheet

DirectRFQ

5503007F

DialightIn Stock: 58675503007F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MV54919MP7 are identified based on the following critical parameters that determine functional compatibility:

Primary Matching Criteria:

• Configuration: Single green and red LED
• Current Rating: 20mA
• Mounting Type: Through Hole, Right Angle
• Lens Size: 5mm form factor
• Moisture Sensitivity Level: 1 (Unlimited)
• Regulatory Compliance: REACH Unaffected, ECCN EAR99

Acceptable Variation Parameters:

• Millicandela Rating: Substitutes may exceed the 6mcd specification
• Viewing Angle: Substitutes may differ from 100° specification
• Voltage Rating: Minor variations acceptable within LED forward voltage tolerances
• Lens Type: Diffused lens type maintained across substitutes

Parameter Comparison

Engineering Selection Recommendations

MV54919MP6 (Direct Substitute): This onsemi part maintains identical electrical and mechanical specifications to the MV54919MP7, including voltage rating, current rating, lens configuration, and mounting type. Both components share obsolete product status. This part is the primary equivalent for direct replacement applications.

5503007F (Similar Substitute): The Dialight 5503007F provides functional equivalence with the following considerations: it maintains the 20mA current rating, through-hole right-angle mounting, and dual green/red configuration. The 5503007F is an active product with ROHS3 compliance, providing long-term availability. Voltage ratings differ slightly (2.1V Green, 1.8V Red versus 2.3V), and millicandela ratings are significantly higher (40mcd Green, 90mcd Red versus 6mcd). The viewing angle is narrower at 60° compared to 100°. These differences are within acceptable parameters for LED indicator applications where the primary function is status indication rather than high-intensity illumination.

Frequently Asked Questions (FAQ)

Q: Can MV54919MP6 be used as a direct replacement for MV54919MP7? A: Yes. Both parts are manufactured by onsemi with identical electrical specifications (20mA, 2.3V), mechanical configuration (5mm T-1 3/4 through-hole right-angle), and lens type (diffused, tinted). They are functionally interchangeable.

Q: What are the key differences between MV54919MP7 and 5503007F? A: The primary differences are manufacturer (onsemi versus Dialight), product status (obsolete versus active), and performance characteristics. The 5503007F has higher brightness (40mcd Green, 90mcd Red versus 6mcd), narrower viewing angle (60° versus 100°), and slightly lower forward voltage ratings (2.1V Green, 1.8V Red versus 2.3V). All three parameters remain compatible with standard LED indicator circuit designs.

Q: Is the 5503007F suitable for applications requiring the original MV54919MP7 specifications? A: The 5503007F is suitable for applications where the primary requirement is a dual-color LED indicator in a 5mm through-hole right-angle package with 20mA operation. The higher brightness and narrower viewing angle may affect visual appearance in the application but do not prevent functional operation. Circuit design should account for the lower forward voltage when calculating series resistor values.

Q: What is the significance of the viewing angle difference between these parts? A: The MV54919MP7 and MV54919MP6 have a 100° viewing angle, while the 5503007F has a 60° viewing angle. This affects the angular range over which the LED remains visible at full brightness. Applications requiring wide-angle visibility should prioritize the onsemi parts. Applications with fixed viewing geometry may not be affected by this difference.

Q: Are all three parts compliant with current regulatory requirements? A: All three parts maintain REACH Unaffected status and ECCN EAR99 classification. The 5503007F additionally carries ROHS3 compliance. All parts meet the regulatory requirements specified in the input parameters.