MV5360 Equivalent & Substitute Parts

Part Overview

The MV5360 is a yellow LED indicator in T-1 through-hole package manufactured by onsemi, featuring a 3mm clear domed lens with 12mcd brightness at 2.1V forward voltage. The part is classified as obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications. Substitute parts must maintain compatibility with through-hole mounting, yellow color specification, and similar electrical characteristics to ensure direct circuit board replacement without design modification.

Key Parameters

Parameter	MV5360 Value
Color	Yellow
Lens Transparency	Clear
Lens Size	3mm, T-1
Voltage - Forward (Vf) (Typ)	2.1V
Current - Test	10mA
Millicandela Rating	12mcd
Viewing Angle	45°
Mounting Type	Through Hole
Package / Case	Radial
Wavelength - Peak	585nm
Height (Max)	6.30mm
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitute parts are grouped into two categories based on allowed electrical and mechanical parameters:

Category 1: Direct Yellow LED Substitutes (Preferred) Parts maintaining yellow color, clear lens transparency, and compatible forward voltage within the 2.0V to 2.2V range. These parts preserve the original circuit design intent and require no electrical redesign.

HLMP-1420: Yellow, 2V forward voltage, 15mcd, active product status
HLMP-1440: Yellow, 2.1V forward voltage, 45mcd, active product status
SLI-343YCT32: Yellow, 1.9V forward voltage, 350mcd, active product status
SLI-343Y8C3F: Yellow, 2.2V forward voltage, 680mcd, active product status

Category 2: Alternative Color LED Substitutes (Conditional) Parts with different color specifications (orange) that may be used only when circuit design permits color deviation. These parts maintain T-1 through-hole package compatibility and similar electrical operating ranges.

SLI-343DC3F: Orange, 1.9V forward voltage, 500mcd, not for new designs
SLI-343DU3F: Orange, 1.9V forward voltage, 350mcd, not for new designs
SLI-343D8C3F: Orange, 2.2V forward voltage, 680mcd, active product status

Parameter Comparison

Part Number	Manufacturer	Color	Lens Transparency	Vf (Typ)	Current - Test	Millicandela	Viewing Angle	Wavelength - Peak	Height (Max)	Product Status	Packaging
MV5360	onsemi	Yellow	Clear	2.1V	10mA	12mcd	45°	585nm	6.30mm	Obsolete	-
HLMP-1420	Broadcom Limited	Yellow	Clear	2V	10mA	15mcd	45°	583nm	6.35mm	Active	Bulk
HLMP-1440	Broadcom Limited	Yellow	Clear	2.1V	20mA	45mcd	24°	583nm	6.35mm	Active	Bulk
SLI-343YCT32	Rohm Semiconductor	Yellow	Clear	1.9V	20mA	350mcd	40°	-	5.60mm	Active	Tape & Box
SLI-343Y8C3F	Rohm Semiconductor	Yellow	Clear	2.2V	20mA	680mcd	40°	-	5.60mm	Active	Bulk
SLI-343DC3F	Rohm Semiconductor	Orange	Clear	1.9V	20mA	500mcd	40°	605nm	5.60mm	Not For New Designs	Bulk
SLI-343DU3F	Rohm Semiconductor	Orange	Diffused	1.9V	20mA	350mcd	40°	-	5.60mm	Not For New Designs	Bulk
SLI-343D8C3F	Rohm Semiconductor	Orange	Clear	2.2V	20mA	680mcd	40°	605nm	5.60mm	Active	Bulk

Engineering Selection Recommendations

Primary Substitutes (Active Product Status, Yellow Color)

HLMP-1440 is the preferred substitute. It maintains identical forward voltage (2.1V), yellow color, and clear lens specification. Higher test current (20mA vs 10mA) and increased brightness (45mcd vs 12mcd) are acceptable for indicator applications. Active product status ensures long-term availability and RoHS3 compliance.

HLMP-1420 provides an alternative with slightly lower forward voltage (2V) and comparable brightness (15mcd). Active status and RoHS3 compliance support production continuity.

Secondary Substitutes (Active Product Status, Yellow Color)

SLI-343Y8C3F offers significantly higher brightness (680mcd) at 2.2V forward voltage with active product status. Suitable for applications requiring enhanced visibility. Smaller physical height (5.60mm vs 6.30mm) must be verified for mechanical clearance.

SLI-343YCT32 operates at lower forward voltage (1.9V) with 350mcd brightness and active product status. Tape & Box packaging supports automated assembly. Verify circuit design tolerance for 0.2V voltage reduction.

Conditional Substitutes (Not For New Designs)

SLI-343DC3F and SLI-343DU3F carry "Not For New Designs" status and should be used only for legacy system maintenance where orange color is acceptable. These parts have limited long-term availability.

Alternative Color Substitute (Active Status)

SLI-343D8C3F is an orange LED with active product status, 2.2V forward voltage, and 680mcd brightness. Use only when circuit design permits color change from yellow to orange.

Frequently Asked Questions (FAQ)

Q: Can HLMP-1440 directly replace MV5360 without circuit modification?

A: Yes. HLMP-1440 maintains the same forward voltage (2.1V), yellow color, and clear lens. The higher test current specification (20mA vs 10mA) reflects improved brightness capability but does not require circuit redesign if the original circuit was designed for standard LED operation.

Q: What is the impact of using SLI-343YCT32 with 1.9V forward voltage instead of 2.1V?

A: The 0.2V reduction in forward voltage will result in slightly lower brightness output in the same circuit. Verify that the circuit's current-limiting resistor accommodates this voltage difference. The part is suitable for applications where reduced brightness is acceptable or where the circuit design includes adjustable current limiting.

Q: Why are some substitutes marked "Not For New Designs"?

A: Parts with "Not For New Designs" status indicate limited manufacturing availability or planned discontinuation. These parts are suitable only for maintaining existing products or legacy systems. For new designs, select parts with "Active" product status to ensure long-term supply chain stability.

Q: Can orange LED substitutes (SLI-343D8C3F, SLI-343DC3F, SLI-343DU3F) be used in place of yellow?

A: Orange substitutes are mechanically and electrically compatible but change the visual indication color. Use only if the application design permits color deviation or if the circuit is specifically designed for orange indication. Verify with system documentation before substitution.

Q: What is the difference between clear and diffused lens transparency?

A: Clear lenses provide focused, directional light output with higher brightness concentration. Diffused lenses scatter light over a wider area with lower peak brightness. MV5360 uses clear lens; diffused alternatives (SLI-343DU3F, SLI-343YY3F) are suitable only if the application design accepts diffused light distribution.

Q: Are all substitutes RoHS3 compliant?

A: All active product status substitutes (HLMP-1420, HLMP-1440, SLI-343Y8C3F, SLI-343YCT32, SLI-343D8C3F) are RoHS3 compliant. Parts marked "Not For New Designs" also carry RoHS3 compliance. The obsolete MV5360 is REACH unaffected.

Q: What packaging options are available for production?

A: HLMP-1420 and HLMP-1440 are supplied in Bulk packaging. SLI-343YCT32 is available in Tape & Box format for automated assembly. SLI-343Y8C3F and other Rohm parts are supplied in Bulk. Verify packaging compatibility with your assembly process before final part selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message