Equivalent & Substitute Parts for MV5360

Part Overview

The Everlight Electronics MV5360 is a yellow LED indication component in T-1 through-hole configuration with 3mm lens diameter. This discrete radial-mounted LED operates at 2.1V forward voltage with 12mcd luminous intensity and 45° viewing angle. The product is Active status and ROHS3 compliant. Substitute parts are identified to provide alternative sourcing options where inventory, lead time, or application-specific parameters require component alternatives within compatible electrical and mechanical specifications.

Substiute Parts

MV5360

Everlight Electronics Co LtdIn Stock: 969MV5360 Datasheet

Current PartRFQ

HLMP-1420

Broadcom LimitedIn Stock: 25744HLMP-1420 Datasheet

SimilarRFQ

HLMP-1440

Broadcom LimitedIn Stock: 120803HLMP-1440 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MV5360 are qualified based on the following criteria:

Mechanical Compatibility: All substitute parts maintain T-1 through-hole radial mounting configuration with 3mm lens diameter and compatible physical dimensions.

Electrical Compatibility: Forward voltage tolerance allows substitution within the range of 2.0V to 2.1V at specified test current. Test current compatibility is evaluated at the rated operating point.

Optical Characteristics: Yellow color specification (585nm peak wavelength) is maintained across all substitutes. Lens transparency (Clear) is consistent. Viewing angle and luminous intensity variations are permitted within application tolerance.

Compliance & Status: All substitute parts maintain ROHS3 compliance and Active product status, ensuring regulatory alignment and ongoing manufacturer support.

Packaging: Bulk packaging is standard for substitute inventory availability.

The two identified substitutes (HLMP-1420 and HLMP-1440) are both manufactured by Broadcom Limited and meet the core mechanical and electrical compatibility requirements for direct substitution in through-hole LED indication circuits.

Parameter Comparison

Engineering Selection Recommendations

HLMP-1420 Substitution: This part is suitable where forward voltage tolerance of 2.0V is acceptable and luminous intensity of 15mcd meets application requirements. The 45° viewing angle matches the MV5360 specification. Test current remains at 10mA, maintaining circuit compatibility. ROHS3 compliance and Active status ensure regulatory and supply continuity.

HLMP-1440 Substitution: This part is suitable where higher luminous intensity (45mcd) is required or beneficial for the application. Forward voltage matches at 2.1V. The narrower 24° viewing angle represents a functional difference requiring circuit-level evaluation. Test current increases to 20mA, necessitating circuit current capacity verification. ROHS3 compliance and Active status are maintained.

Selection Basis: Both substitutes are qualified based on mechanical compatibility (T-1 through-hole radial package), electrical compatibility (forward voltage within tolerance), optical compatibility (yellow 585nm wavelength family), and regulatory compliance (ROHS3 Active status). Selection between substitutes depends on specific application requirements for luminous intensity and viewing angle.

Frequently Asked Questions (FAQ)

Q: Can HLMP-1420 be used as a direct replacement for MV5360?

A: HLMP-1420 is mechanically and electrically compatible. Forward voltage is 2.0V versus 2.1V for MV5360, which is within acceptable tolerance for yellow LED indication circuits. Luminous intensity is 15mcd versus 12mcd, representing a 25% increase. Viewing angle remains at 45°. Compatibility depends on circuit design tolerance for these parameter variations.

Q: What is the key difference between HLMP-1420 and HLMP-1440?

A: HLMP-1440 provides higher luminous intensity (45mcd versus 15mcd) and narrower viewing angle (24° versus 45°). HLMP-1440 operates at 20mA test current versus 10mA for HLMP-1420. Forward voltage is identical at 2.1V. Selection depends on application requirements for brightness and viewing angle distribution.

Q: Are all three parts physically interchangeable in through-hole PCB layouts?

A: Yes. All three parts use T-1 3mm radial package configuration with compatible maximum heights (6.30mm to 6.35mm). Through-hole lead spacing and radial orientation are identical. Physical PCB layout compatibility is confirmed.

Q: Do all parts meet the same regulatory requirements?

A: Yes. MV5360, HLMP-1420, and HLMP-1440 are all ROHS3 compliant with Active product status. Regulatory compliance is equivalent across all three parts.

Q: What circuit parameters must be verified when substituting HLMP-1440?

A: HLMP-1440 operates at 20mA test current versus 10mA for MV5360 and HLMP-1420. Circuit current-limiting resistor and power supply capacity must be verified to support the higher current requirement. Forward voltage at 2.1V matches MV5360, so voltage drop calculations remain consistent.

Q: Is wavelength compatibility confirmed across all three parts?

A: Yes. All three parts are specified in the yellow wavelength family with peak wavelengths of 583nm to 585nm. Wavelength compatibility for yellow LED indication applications is confirmed.