MV5152 Orange LED T-1 3/4 Through-Hole Equivalent & Substitute Parts

Part Overview

The MV5152 is an orange LED indicator from onsemi, configured as a discrete 2V radial through-hole component in T-1 3/4 (5mm) package format. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. The MV5152 delivers 100mcd brightness with a 28° viewing angle, suitable for standard LED indication applications requiring orange color output at 2V forward voltage with 20mA test current.

Key Parameters

Parameter	MV5152 Value
Manufacturer	onsemi
Part Number	MV5152
Product Status	Obsolete
Color	Orange
Lens Transparency	Clear
Package / Case	Radial
Lens Size	5mm, T-1 3/4
Voltage - Forward (Vf) (Typ)	2V
Current - Test	20mA
Millicandela Rating	100mcd
Viewing Angle	28°
Wavelength - Peak	635nm
Mounting Type	Through Hole
Height (Max)	8.89mm
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitution logic for the MV5152 is based on the following critical parameters:

Primary Matching Criteria:

Package format: T-1 3/4 (5mm) through-hole radial configuration
Mounting type: Through-hole
Lens style: Round with domed top
Forward voltage range: 2V nominal (allows 1.7V to 2.1V variants)
Test current: 10mA to 20mA range
Wavelength region: 630nm to 660nm (red-orange spectrum)

Secondary Compatibility Factors:

Millicandela rating: 2.5mcd to 100mcd (brightness variation acceptable based on application)
Viewing angle: 16° to 60° (application-dependent)
Product status: Active preferred for long-term availability
Compliance: RoHS3 compliance and REACH unaffected status preferred

Substitute parts are grouped into two categories: direct orange/red-orange color matches (LTL-4294-012) and red-spectrum alternatives (LTL-307EE-012, LTL-4224-002, LTL-4214, SLR-56VC3F, SLR-56VCT32, 4302H1-5V, 4302H1-12V, HLMP-D155, Z-212R). All substitute parts maintain the same T-1 3/4 package, through-hole mounting, and radial configuration as the MV5152.

Parameter Comparison

Part Number	Manufacturer	Color	Vf (Typ)	Current - Test	mcd	Viewing Angle	Wavelength - Peak	Height (Max)	Product Status	RoHS Status
MV5152	onsemi	Orange	2V	20mA	100	28°	635nm	8.89mm	Obsolete	-
LTL-4294-012	Lite-On Inc.	Red-Orange	2V	20mA	90	16°	630nm	9.85mm	Active	RoHS3 Compliant
LTL-307EE-012	Lite-On Inc.	Red	2V	20mA	90	40°	635nm	9.85mm	Active	RoHS3 Compliant
LTL-4224-002	Lite-On Inc.	Red	2V	20mA	90	16°	635nm	9.85mm	Active	RoHS3 Compliant
LTL-4214	Lite-On Inc.	Red	2.1V	10mA	19	16°	697nm	8.60mm	Active	RoHS3 Compliant
SLR-56VC3F	Rohm Semiconductor	Red	2V	10mA	25	40°	-	8.90mm	Active	RoHS3 Compliant
SLR-56VCT32	Rohm Semiconductor	Red	2V	10mA	25	40°	-	8.90mm	Active	RoHS3 Compliant
4302H1-5V	Visual Communications Company - VCC	Red	5V	10mA	8	60°	635nm	10.08mm	Active	RoHS3 Compliant
4302H1-12V	Visual Communications Company - VCC	Red	12V	13mA	8	60°	635nm	10.08mm	Active	RoHS3 Compliant
HLMP-D155	Broadcom Limited	Red	1.7V	1mA	10	24°	660nm	12.44mm	Active	RoHS3 Compliant
Z-212R	JKL Components Corp.	Red	1.7V	10mA	2.5	16°	660nm	14.60mm	Active	RoHS non-compliant

Engineering Selection Recommendations

Tier 1 - Closest Functional Match: LTL-4294-012 (Lite-On Inc.) is the primary substitute. It matches the MV5152 in forward voltage (2V), test current (20mA), millicandela rating (90mcd), and wavelength peak (630nm). The red-orange color and clear lens transparency provide the closest visual match. Product status is active with RoHS3 compliance, ensuring long-term availability and regulatory compliance.

Tier 2 - Equivalent Electrical Performance: LTL-307EE-012 and LTL-4224-002 (both Lite-On Inc.) provide identical electrical specifications (2V, 20mA, 90mcd, 635nm peak wavelength) with active product status and RoHS3 compliance. Color shifts to red, which may affect visual indication in applications requiring specific orange output. Both are available in tape & reel packaging.

Tier 3 - Reduced Current Operation: SLR-56VC3F and SLR-56VCT32 (Rohm Semiconductor) operate at 2V forward voltage with reduced test current (10mA) and lower brightness (25mcd). These are suitable for applications where lower power consumption is acceptable. Both maintain active status and RoHS3 compliance. SLR-56VCT32 is packaged in tape & box format.

Tier 4 - Alternative Voltage Platforms: 4302H1-5V and 4302H1-12V (Visual Communications Company - VCC) require 5V and 12V forward voltages respectively, necessitating circuit redesign. These are suitable only when the application platform supports higher voltage operation. Both are active and RoHS3 compliant.

Not Recommended: HLMP-D155 (Broadcom Limited) and Z-212R (JKL Components Corp.) exhibit significantly reduced brightness (10mcd and 2.5mcd respectively) and are unsuitable for direct replacement in applications requiring 100mcd output. Z-212R is RoHS non-compliant.

Frequently Asked Questions (FAQ)

Q: Can I use a red LED as a direct substitute for the orange MV5152? A: Red LEDs in the 630nm to 660nm wavelength range are functionally compatible if the application does not require specific orange color output. Electrical parameters (voltage, current, brightness) must match the circuit design. LTL-307EE-012 and LTL-4224-002 provide identical electrical performance to the MV5152 with red color output.

Q: What is the key difference between LTL-4294-012 and LTL-307EE-012? A: LTL-4294-012 is red-orange (621nm dominant wavelength) with 16° viewing angle, while LTL-307EE-012 is red (623nm dominant wavelength) with 40° viewing angle. Both operate at 2V, 20mA, and deliver 90mcd brightness. Choose based on required color and viewing angle for the application.

Q: Why do 4302H1-5V and 4302H1-12V have different forward voltages? A: These parts are designed for different voltage platforms. 4302H1-5V operates at 5V forward voltage with 10mA test current, while 4302H1-12V operates at 12V with 13mA test current. Both deliver only 8mcd brightness, making them unsuitable for high-brightness applications. Use only if your circuit platform supports these voltage levels.

Q: Is the T-1 3/4 package format consistent across all substitutes? A: Yes. All substitute parts listed maintain the T-1 3/4 (5mm) through-hole radial package format, ensuring mechanical compatibility with the MV5152 footprint. Height variations (8.60mm to 14.60mm maximum) are within typical PCB assembly tolerances for through-hole components.

Q: What does RoHS3 compliance mean for component selection? A: RoHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. All recommended Tier 1, 2, and 3 substitutes are RoHS3 compliant. Z-212R is RoHS non-compliant and should be avoided for applications requiring regulatory compliance.

Q: Can I use HLMP-D155 as a substitute despite lower brightness? A: HLMP-D155 delivers only 10mcd compared to the MV5152's 100mcd, representing a 90% reduction in brightness. It is suitable only for applications where lower brightness is acceptable or where the circuit includes brightness compensation. Not recommended for direct replacement in standard indication applications.

Q: What is the significance of viewing angle differences between substitutes? A: Viewing angle determines the cone of light visibility. The MV5152 has 28° viewing angle. Substitutes range from 16° (narrow, directional) to 60° (wide, omnidirectional). Select based on application requirements: narrow angles for focused indication, wide angles for general visibility across multiple viewing positions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message