Equivalent & Substitute Parts for MV5152

Part Overview

The MV5152 is an orange LED indicator manufactured by Everlight Electronics Co Ltd, designed for through-hole mounting applications. This T-1 3/4 (5mm) discrete LED operates at 2V forward voltage with a 100mcd brightness rating and features a clear domed lens. The component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified based on mechanical compatibility and electrical operating parameters within the T-1 3/4 through-hole LED category. Alternative models may be required due to inventory availability, voltage specification requirements, or specific application constraints.

Substiute Parts

MV5152

Everlight Electronics Co LtdIn Stock: 1033MV5152 Datasheet

Current PartRFQ

4302H1-12V

Visual Communications Company - VCCIn Stock: 20274302H1-12V Datasheet

SimilarRFQ

4302H1-5V

Visual Communications Company - VCCIn Stock: 27094302H1-5V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MV5152 are identified within the T-1 3/4 through-hole LED category based on the following compatibility criteria:

Mechanical Compatibility Parameters:

• Lens Size: 5mm, T-1 3/4
• Mounting Type: Through Hole
• Package / Case: Radial
• Lens Style: Round with Domed Top

Electrical Operating Parameters:

• Forward Voltage (Vf): Substitutes operate at different voltage levels (5V, 12V) compared to the 2V specification of MV5152
• Current - Test: Varies by substitute model
• Wavelength - Peak: 635nm (consistent across all models)

Compliance & Environmental Parameters:

• RoHS3 Compliant status
• MSL 1 (Unlimited) rating
• Product Status: Active

The substitute parts 4302H1-5V and 4302H1-12V from Visual Communications Company (VCC) share identical mechanical form factors and mounting characteristics. These substitutes differ in forward voltage specification and brightness rating, requiring circuit-level evaluation for voltage compatibility in the target application.

Parameter Comparison

Engineering Selection Recommendations

MV5152 (Everlight Electronics Co Ltd): Select this part for applications requiring 2V forward voltage operation with 100mcd brightness output. All three models maintain Active product status and full RoHS3 compliance, ensuring regulatory compatibility across industrial and commercial applications.

4302H1-5V (Visual Communications Company - VCC): Select this substitute when circuit design specifies 5V forward voltage operation. This model operates at 10mA test current with 8mcd brightness rating. Mechanical form factor is compatible with MV5152 mounting requirements. Height specification of 10.08mm requires clearance verification in confined PCB layouts.

4302H1-12V (Visual Communications Company - VCC): Select this substitute when circuit design specifies 12V forward voltage operation. This model operates at 13mA test current with 8mcd brightness rating. Mechanical form factor is compatible with MV5152 mounting requirements. Height specification of 10.08mm requires clearance verification in confined PCB layouts.

All substitute parts carry REACH Unaffected status and maintain MSL 1 (Unlimited) environmental rating, confirming suitability for standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can 4302H1-5V or 4302H1-12V be directly substituted for MV5152 without circuit modification?

A: No. The MV5152 operates at 2V forward voltage, while substitute parts operate at 5V or 12V. Direct substitution requires circuit-level voltage adjustment and current-limiting resistor recalculation to maintain proper LED operation and prevent component damage.

Q: What are the mechanical compatibility considerations between MV5152 and substitute parts?

A: All three models share identical lens size (5mm, T-1 3/4), mounting type (Through Hole), and package configuration (Radial). However, substitute parts have a maximum height of 10.08mm compared to MV5152's 8.89mm. PCB layout clearance must be verified to accommodate the additional 1.19mm height.

Q: How do brightness ratings differ between MV5152 and substitute parts?

A: MV5152 provides 100mcd brightness output. Both 4302H1-5V and 4302H1-12V provide 8mcd brightness output. Application requirements for visual indication intensity must be evaluated to determine if the reduced brightness is acceptable.

Q: Are all three models compliant with RoHS3 and environmental standards?

A: Yes. MV5152, 4302H1-5V, and 4302H1-12V all carry ROHS3 Compliant status and MSL 1 (Unlimited) moisture sensitivity rating. Substitute parts additionally carry REACH Unaffected designation.

Q: What is the wavelength specification for all models?

A: All three models specify 635nm peak wavelength, confirming consistent red spectrum output across the product family.

Q: How do current requirements differ between models?

A: MV5152 operates at 20mA test current. 4302H1-5V operates at 10mA test current. 4302H1-12V operates at 13mA test current. Power supply and current-limiting circuit design must accommodate these specifications.