MV10-10RK Equivalent & Substitute Parts

Part Overview

The MV10-10RK is an insulated ring terminal connector manufactured by 3M, designed for 10-12 AWG wire applications with a #10 stud connection. This component is part of the Scotchlok™ series and is actively produced. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling procurement flexibility and supply chain continuity.

Substiute Parts

MV10-10RK

3MIn Stock: 1035MV10-10RK Datasheet

Current PartRFQ

PV10-10R-D

Panduit CorpIn Stock: 5334PV10-10R-D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MV10-10RK is determined by strict alignment of the following parameters:

• Terminal Type: Circular configuration required
• Stud/Tab Size: #10 stud specification
• Wire Gauge: 10-12 AWG range
• Termination: Crimp connection method
• Insulation: Insulated vinyl material
• Contact Material: Copper composition
• Contact Finish: Tin plating
• Brazed Seam construction
• RoHS compliance status

The substitute part PV10-10R-D meets all critical electrical and mechanical parameters. Dimensional variations in width and insulation diameter fall within acceptable tolerances for equivalent functional performance in #10 stud applications.

Parameter Comparison

Engineering Selection Recommendations

Both the MV10-10RK and PV10-10R-D are active production components with equivalent RoHS and REACH compliance status. Selection between these parts is based on availability, supply chain requirements, and procurement specifications. The PV10-10R-D (Panduit) currently maintains higher inventory levels (5321 pcs vs. 1005 pcs). Both components satisfy identical electrical and mechanical requirements for #10 stud circular ring terminal applications in 10-12 AWG wire systems.

Frequently Asked Questions (FAQ)

Q: Can PV10-10R-D replace MV10-10RK in existing designs?

A: Yes. Both components share identical terminal type, stud size, wire gauge, termination method, insulation type, contact material, and contact finish. Dimensional differences (width and insulation diameter) are within acceptable tolerances for functional equivalence in #10 stud applications.

Q: Are there compliance differences between these parts?

A: Both parts are RoHS compliant and REACH unaffected. The MV10-10RK carries RoHS Compliant status, while the PV10-10R-D carries ROHS3 Compliant status. Both meet current regulatory requirements.

Q: What determines substitution eligibility for ring terminal connectors?

A: Substitution requires matching terminal type (circular), stud size (#10), wire gauge (10-12 AWG), crimp termination, insulated vinyl construction, copper contact material, and tin finish. Brazed seam construction and color consistency are also required.

Q: Are there packaging considerations for these parts?

A: Both components are supplied in bulk packaging. Procurement should confirm quantity requirements and lead times based on current inventory levels.

Q: Can these parts be used interchangeably in field applications?

A: Yes, provided the application requires a #10 stud circular ring terminal for 10-12 AWG wire with crimp termination and insulated vinyl construction. No design modifications are necessary.