MTSW-110-10-G-D-110-RA Equivalent & Substitute Parts

Part Overview

The MTSW-110-10-G-D-110-RA is an active rectangular connector header manufactured by Samtec Inc. in the Flex Stack MTSW series. This through-hole, right-angle connector accommodates 20 positions across 2 rows with 0.100" (2.54mm) pitch spacing. The component features solder termination, push-pull fastening, and gold-plated phosphor bronze contacts rated for 3A continuous current operation across -55°C to 125°C. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and component availability across manufacturing cycles.

Substiute Parts

MTSW-110-10-G-D-110-RA

Samtec Inc.In Stock: 1013MTSW-110-10-G-D-110-RA Datasheet

Current PartRFQ

MTSW-110-07-G-D-110-RA

Samtec Inc.In Stock: 1199MTSW-110-07-G-D-110-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MTSW-110-10-G-D-110-RA is determined by strict equivalence across the following critical parameters:

• Connector Type & Series: Header, Cuttable design within the Flex Stack MTSW series
• Contact Configuration: Male pin contacts, 20 positions across 2 rows
• Pitch Specifications: 0.100" (2.54mm) mating pitch and 0.100" (2.54mm) row spacing
• Mounting & Termination: Through-hole, right-angle mounting with solder termination
• Contact Materials & Finish: Phosphor bronze with gold plating on mating surfaces
• Electrical Performance: 3A current rating, -55°C to 125°C operating range
• Compliance: ROHS3 compliance and UL94 V-0 flammability rating

The substitute part MTSW-110-07-G-D-110-RA maintains identical specifications across all critical parameters, differing only in packaging configuration (bulk versus standard packaging) and moisture sensitivity level designation.

Parameter Comparison

Engineering Selection Recommendations

Both the MTSW-110-10-G-D-110-RA and MTSW-110-07-G-D-110-RA are active products from Samtec Inc. with full ROHS3 compliance and UL94 V-0 flammability certification. The parts are electrically and mechanically identical across all functional parameters. Selection between these parts should be based on packaging requirements and supply chain availability. The MTSW-110-07-G-D-110-RA offers bulk packaging with higher current inventory levels (1144 Pcs versus 970 Pcs), while the MTSW-110-10-G-D-110-RA maintains standard packaging configuration. Both parts satisfy identical design specifications for through-hole, right-angle header applications requiring 20-position, 2-row connector configurations with 0.100" pitch spacing.

Frequently Asked Questions (FAQ)

Q: Are MTSW-110-10-G-D-110-RA and MTSW-110-07-G-D-110-RA electrically interchangeable?

A: Yes. Both parts maintain identical electrical specifications including 3A current rating, -55°C to 125°C operating temperature range, and gold-plated phosphor bronze contact materials. They are direct functional equivalents.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging configuration. MTSW-110-10-G-D-110-RA uses standard packaging, while MTSW-110-07-G-D-110-RA uses bulk packaging. Both parts are mechanically and electrically identical.

Q: Can I use MTSW-110-07-G-D-110-RA as a direct replacement for MTSW-110-10-G-D-110-RA on a PCB?

A: Yes. The parts share identical mounting type (through-hole, right-angle), contact configuration (20 positions, 2 rows), pitch spacing (0.100"), and termination method (solder). No PCB redesign is required.

Q: Are both parts RoHS compliant?

A: Yes. Both MTSW-110-10-G-D-110-RA and MTSW-110-07-G-D-110-RA are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: Which part should I select for new designs?

A: Both parts are active products suitable for new designs. Selection should be based on packaging requirements and supply chain availability. Verify current inventory levels with your supplier.