MTSW-110-08-G-D-200-RA Equivalent & Substitute Parts

Part Overview

The MTSW-110-08-G-D-200-RA is a rectangular connector header manufactured by Samtec Inc., classified within the Flex Stack MTSW series. This through-hole, right-angle connector features 20 positions across 2 rows with 0.100" (2.54mm) pitch spacing. The connector is actively produced and maintains full inventory availability. Substitute parts are identified to support procurement flexibility, design redundancy, and supply chain continuity for applications requiring equivalent electrical and mechanical performance.

Substiute Parts

MTSW-110-08-G-D-200-RA

Samtec Inc.In Stock: 951MTSW-110-08-G-D-200-RA Datasheet

Current PartRFQ

MTSW-110-10-G-D-200-RA

Samtec Inc.In Stock: 1068MTSW-110-10-G-D-200-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MTSW-110-08-G-D-200-RA is determined by strict equivalence across the following critical parameters:

Electrical Compatibility:

• Connector type (Header, Cuttable)
• Contact type (Male Pin)
• Number of positions (20)
• Number of rows (2)
• Pitch - mating (0.100" / 2.54mm)
• Row spacing - mating (0.100" / 2.54mm)
• Contact length - mating (0.200" / 5.08mm)
• Contact length - post (0.090" / 2.29mm)
• Contact material (Phosphor Bronze)
• Contact finish - mating (Gold)
• Current rating (3A)
• Operating temperature range (-55°C ~ 125°C)

Mechanical Compatibility:

• Mounting type (Through Hole, Right Angle)
• Termination method (Solder)
• Insulation height (0.219" / 5.56mm)
• Contact shape (Square)
• Insulation material (Polyester, Glass Filled)
• Insulation color (Black)

Regulatory & Environmental:

• Material flammability rating (UL94 V-0)
• RoHS status (ROHS3 Compliant)
• Series (Flex Stack, MTSW)
• Manufacturer (Samtec Inc.)

The substitute part MTSW-110-10-G-D-200-RA maintains full equivalence across all critical parameters, differing only in packaging configuration and moisture sensitivity level designation.

Parameter Comparison

Engineering Selection Recommendations

Both MTSW-110-08-G-D-200-RA and MTSW-110-10-G-D-200-RA are active products manufactured by Samtec Inc. within the Flex Stack MTSW series. Both parts maintain full ROHS3 compliance and UL94 V-0 material flammability certification, meeting regulatory requirements for industrial and commercial applications.

The parts are electrically and mechanically equivalent across all functional parameters: connector topology, contact configuration, pitch spacing, termination method, temperature rating, and current capacity. Selection between these parts is determined by packaging requirements and moisture sensitivity classification needs for specific supply chain or storage conditions.

Frequently Asked Questions (FAQ)

Q: Are MTSW-110-08-G-D-200-RA and MTSW-110-10-G-D-200-RA directly interchangeable?

A: Yes. Both connectors are electrically and mechanically equivalent. They share identical specifications for connector type, contact configuration, pitch spacing (0.100" / 2.54mm), mounting method (through-hole right-angle), termination (solder), and electrical ratings (3A, -55°C to 125°C). Selection depends on packaging format and moisture sensitivity level requirements.

Q: What is the difference between these two part numbers?

A: The primary differences are packaging configuration and moisture sensitivity level designation. MTSW-110-08-G-D-200-RA specifies MSL 1 (Unlimited), while MTSW-110-10-G-D-200-RA lists MSL as Not Applicable. MTSW-110-10-G-D-200-RA is supplied in Bulk packaging.

Q: Can I use MTSW-110-10-G-D-200-RA as a replacement for MTSW-110-08-G-D-200-RA in existing designs?

A: Yes. The connectors are functionally equivalent for board-to-board or cable applications. No design modifications are required. Verify packaging and moisture sensitivity requirements align with your procurement and storage specifications.

Q: What applications are these connectors suitable for?

A: These rectangular connectors are designed for board-to-board or cable interconnect applications requiring 20-position, 2-row configuration with 0.100" pitch spacing. The through-hole right-angle mounting, solder termination, and 3A current rating support general-purpose digital and low-power analog signal distribution in industrial and commercial electronics.

Q: Are both parts RoHS compliant?

A: Yes. Both MTSW-110-08-G-D-200-RA and MTSW-110-10-G-D-200-RA are ROHS3 compliant and carry UL94 V-0 material flammability certification.

Q: What is the contact material and finish specification?

A: Both connectors use phosphor bronze contacts with gold plating. Mating contact finish is 10.0µin (0.25µm) gold. Post contact finish is 3.00µin (0.076µm) gold.