MTSW-110-06-G-S-000 Equivalent & Substitute Parts

Part Overview

The MTSW-110-06-G-S-000 is a rectangular connector header manufactured by Samtec Inc. within the Flex Stack MTSW series. This through-hole connector features 10 positions at 0.100" (2.54mm) pitch with male pin contacts, gold-plated mating surfaces, and phosphor bronze contact material. The part is Active status and ROHS3 compliant. Equivalent and substitute parts within this series provide alternative contact length configurations while maintaining core electrical and mechanical compatibility, enabling design flexibility for varying application depths and board-to-board spacing requirements.

Substiute Parts

MTSW-110-06-G-S-000

Samtec Inc.In Stock: 818MTSW-110-06-G-S-000 Datasheet

Current PartRFQ

MTSW-110-11-G-S-630

Samtec Inc.In Stock: 1130MTSW-110-11-G-S-630 Datasheet

SimilarRFQ

MTSW-110-07-G-S-130

Samtec Inc.In Stock: 1053MTSW-110-07-G-S-130 Datasheet

SimilarRFQ

MTSW-110-09-G-S-430

Samtec Inc.In Stock: 899MTSW-110-09-G-S-430 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts within the MTSW-110 series are qualified based on the following invariant parameters:

• Manufacturer: Samtec Inc.
• Series: Flex Stack, MTSW
• Number of Positions: 10
• Pitch - Mating: 0.100" (2.54mm)
• Contact Type: Male Pin
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish - Mating: Gold
• Contact Material: Phosphor Bronze
• Insulation Material: Polyester, Glass Filled
• Operating Temperature: -55°C ~ 125°C
• Current Rating: 3A
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Product Status: Active

The primary variable parameter distinguishing substitute parts is Contact Length - Mating, which determines the overall contact length and mating depth. This parameter allows selection based on specific board-to-board spacing and connector engagement depth requirements.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and ROHS3 compliance, ensuring continued availability and regulatory alignment. Selection between MTSW-110-06-G-S-000 and substitute variants is determined by required mating depth and overall contact length specifications for the target application. MTSW-110-07-G-S-130 provides the shortest mating engagement at 0.130" (3.30mm). MTSW-110-09-G-S-430 offers intermediate mating depth at 0.430" (10.92mm). MTSW-110-11-G-S-630 provides maximum mating engagement at 0.630" (16.00mm). All parts share identical electrical ratings, thermal operating range, contact material composition, and flammability certification, supporting direct substitution based on mechanical clearance and spacing requirements.

Frequently Asked Questions (FAQ)

Q: Can MTSW-110-06-G-S-000 be directly replaced with MTSW-110-07-G-S-130, MTSW-110-09-G-S-430, or MTSW-110-11-G-S-630?

A: Direct substitution is possible when board-to-board spacing and connector engagement depth accommodate the alternative contact length. MTSW-110-07-G-S-130 has the shortest overall contact length at 0.430" (10.92mm), while MTSW-110-11-G-S-630 has the longest at 0.930" (23.62mm). Verify mechanical clearance before substitution.

Q: Are all substitute parts electrically equivalent?

A: Yes. All parts maintain identical current rating (3A), operating temperature range (-55°C ~ 125°C), contact material (Phosphor Bronze), contact finish (Gold), and insulation material (Polyester, Glass Filled). Electrical performance is equivalent across all variants.

Q: What is the primary difference between these connector variants?

A: The primary difference is Contact Length - Mating, which varies from 0.130" (3.30mm) in MTSW-110-07-G-S-130 to 0.630" (16.00mm) in MTSW-110-11-G-S-630. This parameter determines overall contact length and mating depth for board-to-board applications.

Q: Are all parts ROHS3 compliant?

A: Yes. All listed parts are ROHS3 compliant and maintain Active product status, ensuring regulatory compliance and continued manufacturing support.

Q: Can these connectors be used interchangeably in the same PCB design?

A: Interchangeability depends on PCB layout and mechanical constraints. Longer contact variants (MTSW-110-09-G-S-430, MTSW-110-11-G-S-630) require greater board-to-board spacing. Shorter variants (MTSW-110-07-G-S-130) are suitable for compact applications. Verify PCB footprint and clearance specifications before design implementation.