MTSW-107-06-T-S-000 Equivalent & Substitute Parts

Part Overview

The MTSW-107-06-T-S-000 is a rectangular connector header manufactured by Samtec Inc. within the Flex Stack MTSW series. This through-hole mounted connector features 7 positions at 0.100" (2.54mm) pitch and is designed for board-to-board or cable applications. The part is currently active in production with 856 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement in circuit designs while maintaining connector integrity and performance specifications.

Substiute Parts

MTSW-107-06-T-S-000

Samtec Inc.In Stock: 924MTSW-107-06-T-S-000 Datasheet

Current PartRFQ

MTSW-107-07-T-S-130

Samtec Inc.In Stock: 865MTSW-107-07-T-S-130 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MTSW-107-06-T-S-000 is determined by the following critical parameters:

• Number of positions: 7 (fixed requirement)
• Pitch - mating: 0.100" (2.54mm) (fixed requirement)
• Contact type: Male Pin (fixed requirement)
• Mounting type: Through Hole (fixed requirement)
• Termination: Solder (fixed requirement)
• Series: Flex Stack, MTSW (fixed requirement)
• Current rating: 3A (fixed requirement)
• Operating temperature range: -55°C ~ 105°C (fixed requirement)
• Material flammability rating: UL94 V-0 (fixed requirement)
• RoHS compliance: ROHS3 Compliant (fixed requirement)

The substitute part MTSW-107-07-T-S-130 maintains all critical electrical and mechanical parameters. The variation in contact length specifications (mating contact length and overall contact length) represents a dimensional difference within the same connector family and does not affect core substitution eligibility when mechanical clearance permits.

Parameter Comparison

Engineering Selection Recommendations

Both MTSW-107-06-T-S-000 and MTSW-107-07-T-S-130 are active production parts with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts depends on mechanical fit requirements within the application. The MTSW-107-07-T-S-130 features a longer mating contact length (0.130" versus unspecified for the main part) and increased overall contact length (0.430" versus 0.300"), which may affect board-to-board stacking height and clearance considerations. Both parts maintain identical electrical performance, current rating, temperature range, and contact material specifications. Inventory availability shows 856 units for MTSW-107-06-T-S-000 and 838 units for MTSW-107-07-T-S-130.

Frequently Asked Questions (FAQ)

Q: Can MTSW-107-07-T-S-130 directly replace MTSW-107-06-T-S-000 in all applications?

A: Direct replacement is possible when mechanical clearance permits. The primary difference is contact length specification. Verify that the increased overall contact length (0.430" versus 0.300") does not conflict with PCB layout, stacking height requirements, or mating connector specifications.

Q: Are the electrical performance characteristics identical between these parts?

A: Yes. Both parts share identical current rating (3A), operating temperature range (-55°C ~ 105°C), contact material (Phosphor Bronze), contact finish (Tin), and insulation material (Polyester, Glass Filled).

Q: What is the significance of the contact length difference?

A: Contact length affects the depth of engagement with mating connectors and the overall height of the assembled connector stack. The MTSW-107-07-T-S-130 provides extended mating contact length, which may be required for specific mating connector designs or applications requiring deeper engagement.

Q: Are both parts RoHS compliant?

A: Yes. Both MTSW-107-06-T-S-000 and MTSW-107-07-T-S-130 are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What is the moisture sensitivity level for these parts?

A: MTSW-107-06-T-S-000 has MSL 1 (Unlimited). MTSW-107-07-T-S-130 is listed as Not Applicable for MSL, indicating no moisture sensitivity restrictions.