MTSW-106-10-G-S-100-RE Equivalent & Substitute Parts

Part Overview

The MTSW-106-10-G-S-100-RE is a rectangular connector header manufactured by Samtec Inc. within the Flex Stack MTSW series. This through-hole, right-angle connector features 6 positions at 0.100" (2.54mm) pitch and is designed for board-to-board or cable applications. The part is currently active in production with 1,070 units in stock. Substitute parts may be required due to inventory constraints, supply chain considerations, or specific application requirements within the same product family.

Substiute Parts

MTSW-106-10-G-S-100-RE

Samtec Inc.In Stock: 1171MTSW-106-10-G-S-100-RE Datasheet

Current PartRFQ

MTSW-106-09-G-S-100-RE

Samtec Inc.In Stock: 885MTSW-106-09-G-S-100-RE Datasheet

SimilarRFQ

MTSW-106-07-G-S-100-RA

Samtec Inc.In Stock: 784MTSW-106-07-G-S-100-RA Datasheet

SimilarRFQ

MTSW-106-08-G-S-100-RA

Samtec Inc.In Stock: 927MTSW-106-08-G-S-100-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MTSW-106-10-G-S-100-RE is determined by strict equivalence across the following critical parameters:

• Manufacturer: Samtec Inc.
• Series: Flex Stack, MTSW
• Connector Type: Header, Cuttable
• Contact Type: Male Pin
• Number of Positions: 6
• Pitch - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Finish - Mating: Gold
• Contact Material: Phosphor Bronze
• Insulation Material: Polyester, Glass Filled
• Operating Temperature: -55°C ~ 125°C
• Current Rating: 3A
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

All substitute parts listed maintain these core electrical and mechanical specifications, ensuring functional interchangeability within applications designed for the MTSW-106-10-G-S-100-RE.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status within the Samtec Flex Stack MTSW series and carry ROHS3 compliance certification. Selection among MTSW-106-10-G-S-100-RE, MTSW-106-09-G-S-100-RE, MTSW-106-07-G-S-100-RA, and MTSW-106-08-G-S-100-RA is based on availability and inventory levels. Each part satisfies identical electrical performance requirements, thermal operating ranges, and regulatory compliance standards. The primary differentiator is stock quantity, with MTSW-106-10-G-S-100-RE offering the highest current availability at 1,070 units.

Frequently Asked Questions (FAQ)

Q: Are all listed parts electrically interchangeable with the MTSW-106-10-G-S-100-RE?

A: Yes. All substitute parts share identical electrical specifications including 3A current rating, -55°C to 125°C operating temperature range, gold-plated phosphor bronze contacts, and UL94 V-0 flammability rating.

Q: What is the difference between these part numbers?

A: The differences are encoded in the part number suffix. The numeric designations (10, 09, 07, 08) and orientation codes (RE, RA) indicate variations in insulation height or contact post length within the MTSW-106 base product family. All listed variants maintain the same 6-position, 2.54mm pitch configuration and through-hole right-angle mounting.

Q: Can I use these parts interchangeably on the same PCB?

A: Interchangeability depends on the specific mechanical constraints of your application. All parts share identical mating pitch (0.100"), contact type (male pin), and mounting method (through-hole, right-angle solder termination). Verify that your PCB layout and connector cavity accommodate the specific insulation height and post length of your selected variant.

Q: Are all parts RoHS compliant?

A: Yes. All listed parts carry ROHS3 compliance certification and are suitable for applications requiring RoHS compliance.

Q: Which part should I select if inventory is a concern?

A: MTSW-106-10-G-S-100-RE offers the highest stock level at 1,070 units. If this part is unavailable, MTSW-106-08-G-S-100-RA (826 units) and MTSW-106-09-G-S-100-RE (812 units) provide the next highest availability.