MTP23P06V Equivalent & Substitute Parts

Part Overview

The MTP23P06V is a P-Channel MOSFET manufactured by onsemi, rated for 60V drain-to-source voltage with 23A continuous drain current at 25°C. The device is housed in a TO-220 through-hole package and is designed for power switching applications requiring moderate voltage and current handling. The MTP23P06V is classified as obsolete, making equivalent and substitute parts necessary for new designs and ongoing production support.

Key Parameters

Parameter	Value	Unit
FET Type	P-Channel	—
Drain to Source Voltage (Vdss)	60	V
Continuous Drain Current (Id) @ 25°C	23	A
Rds On (Max) @ Id, Vgs	120 mOhm @ 11.5A, 10V	—
Power Dissipation (Max)	90	W
Operating Temperature Range	-55 to 175	°C
Mounting Type	Through Hole	—
Package	TO-220-3	—

Substitute Part Grouping Explanation

Substitution of the MTP23P06V is determined by the following critical parameters:

Voltage Rating (Vdss): The substitute must support at least 60V drain-to-source voltage. Parts rated above 60V (such as 100V devices) are electrically compatible in applications where the MTP23P06V operates, as they provide additional voltage margin.

Current Rating (Id): The substitute must support at least 23A continuous drain current at 25°C to maintain equivalent current-handling capability. Parts with higher current ratings provide additional design margin.

On-Resistance (Rds On): The substitute should maintain comparable on-resistance characteristics to ensure similar power dissipation and thermal performance in the application.

Package Type: All substitutes must use the TO-220-3 through-hole package to ensure mechanical and thermal compatibility with existing PCB layouts and heatsinking arrangements.

Channel Type: All substitutes must be P-Channel MOSFETs to maintain circuit polarity and gate drive compatibility.

Operating Temperature: The substitute must support the full operating temperature range of -55°C to 175°C or a subset thereof that covers the application requirements.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Power Dissipation (W)	Package	Status
MTP23P06V	onsemi	60	23	120 @ 11.5A, 10V	90	TO-220-3	Obsolete
FQP17P06	onsemi	60	17	120 @ 8.5A, 10V	79	TO-220-3	Active
IRF5305PBF	Infineon Technologies	55	31	60 @ 16A, 10V	110	TO-220-3	Active
IRF9540NPBF	Infineon Technologies	100	23	117 @ 11A, 10V	140	TO-220-3	Active
IRF9540PBF	Vishay Siliconix	100	19	200 @ 11A, 10V	150	TO-220-3	Active
IRF9530NPBF	Infineon Technologies	100	14	200 @ 8.4A, 10V	79	TO-220-3	Active
IRF9530PBF	Vishay Siliconix	100	12	300 @ 7.2A, 10V	88	TO-220-3	Active
IRF5210PBF	Infineon Technologies	100	40	60 @ 24A, 10V	200	TO-220-3	Active
IRF9510PBF	Vishay Siliconix	100	4	1200 @ 2.4A, 10V	43	TO-220-3	Active
IRF9520NPBF	Infineon Technologies	100	6.8	480 @ 4A, 10V	—	TO-220-3	Obsolete
IRF9520PBF	Vishay Siliconix	100	6.8	600 @ 4.1A, 10V	60	TO-220-3	Active

Engineering Selection Recommendations

Primary Substitute: IRF9540NPBF

The IRF9540NPBF (Infineon Technologies) is the most direct substitute for the MTP23P06V. It provides identical 23A continuous drain current at 25°C, matching the original part's current specification. The device is rated for 100V drain-to-source voltage, providing additional voltage margin beyond the 60V requirement. On-resistance is 117 mOhm at 11A and 10V, comparable to the MTP23P06V specification of 120 mOhm at 11.5A and 10V. The IRF9540NPBF is active in production, RoHS3 compliant, and housed in the TO-220-3 package. Operating temperature range is -55°C to 150°C, which covers the primary operating window of the MTP23P06V.

Secondary Substitute: IRF5305PBF

The IRF5305PBF (Infineon Technologies) offers higher current capability at 31A continuous drain current, exceeding the MTP23P06V requirement. Voltage rating is 55V, which is slightly below the original 60V specification but remains within acceptable margins for most applications. On-resistance is 60 mOhm at 16A and 10V, providing superior performance. The device is active in production, RoHS3 compliant, and operates across the full -55°C to 175°C temperature range. This part is suitable for applications where additional current margin is beneficial.

Alternative Substitute: FQP17P06

The FQP17P06 (onsemi) maintains the same manufacturer as the original part and shares the 60V voltage rating. Current rating is 17A, which is lower than the MTP23P06V but sufficient for applications with reduced current requirements. On-resistance is 120 mOhm at 8.5A and 10V. The device is active in production and RoHS3 compliant. This part is suitable for direct replacement in current-limited applications.

Not Recommended for Direct Substitution:

IRF9510PBF, IRF9520NPBF, IRF9520PBF, and IRF9530PBF are not suitable direct substitutes due to insufficient continuous drain current ratings (4A, 6.8A, 6.8A, and 12A respectively), which fall significantly below the MTP23P06V specification of 23A.

Frequently Asked Questions (FAQ)

Q: Can the IRF9540NPBF replace the MTP23P06V in all applications?

A: The IRF9540NPBF is electrically compatible with the MTP23P06V in applications operating at or below 60V. The higher 100V rating provides additional voltage margin. Current capability is identical at 23A. On-resistance characteristics are comparable. The primary consideration is the operating temperature range: IRF9540NPBF is rated to 150°C versus 175°C for the MTP23P06V. Applications requiring operation above 150°C require evaluation of thermal performance.

Q: What is the difference between IRF9540NPBF and IRF9540PBF?

A: Both devices are P-Channel 100V MOSFETs in TO-220-3 packages. The IRF9540NPBF (Infineon) provides 23A continuous drain current with 117 mOhm on-resistance. The IRF9540PBF (Vishay Siliconix) provides 19A continuous drain current with 200 mOhm on-resistance. The IRF9540NPBF more closely matches the MTP23P06V current specification and offers lower on-resistance, making it the preferred choice for direct substitution.

Q: Is the FQP17P06 suitable for applications requiring 23A?

A: The FQP17P06 is rated for 17A continuous drain current, which is below the MTP23P06V specification of 23A. This part is suitable only for applications where the actual current requirement is 17A or less. For applications requiring the full 23A capability, the IRF9540NPBF or IRF5305PBF are appropriate choices.

Q: Why is the IRF5305PBF rated for 55V instead of 60V?

A: The IRF5305PBF is rated for 55V drain-to-source voltage, which is 5V below the MTP23P06V specification. In applications where the maximum supply voltage is 55V or less, this part is fully compatible. For applications with supply voltages between 55V and 60V, the IRF9540NPBF (100V rated) is the safer choice to maintain voltage margin.

Q: Are all substitute parts RoHS compliant?

A: The MTP23P06V is RoHS non-compliant. All recommended substitute parts (IRF9540NPBF, IRF5305PBF, FQP17P06) are RoHS3 compliant. This compliance status should be verified against specific procurement requirements for new designs.

Q: Can I use a higher-rated part in place of the MTP23P06V?

A: Yes, within the constraints of circuit design. A part with higher voltage rating (such as 100V instead of 60V) is electrically compatible. A part with higher current rating provides additional design margin. However, a part with lower current or voltage rating than the MTP23P06V is not suitable unless the application requirements are confirmed to be lower than the original specification.

Q: What is the significance of the TO-220-3 package?

A: The TO-220-3 package is a three-terminal through-hole package with standardized pin spacing and heatsinking surface. All substitute parts listed use this identical package, ensuring mechanical compatibility with existing PCB layouts, heatsinks, and thermal management solutions. Package compatibility eliminates the need for PCB redesign.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message