MTMM-110-05-SM-S-200 Equivalent & Substitute Parts

Part Overview

The MTMM-110-05-SM-S-200 is a 2MM terminal strip connector header manufactured by Samtec Inc. This through-hole rectangular connector features 10 positions in a single row with 0.079" (2.00mm) pitch spacing. The connector is actively produced and widely used in board-to-board and cable interconnect applications requiring reliable solder termination and push-pull fastening. Identifying equivalent and substitute parts ensures design flexibility, supply chain continuity, and component availability across manufacturing cycles.

Substiute Parts

MTMM-110-05-SM-S-200

Samtec Inc.In Stock: 1232MTMM-110-05-SM-S-200 Datasheet

Current PartRFQ

MTMM-110-05-S-S-200

Samtec Inc.In Stock: 960MTMM-110-05-S-S-200 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MTMM-110-05-SM-S-200 is determined by strict alignment of the following critical parameters:

• Pitch - Mating: 0.079" (2.00mm)
• Number of Positions: 10
• Number of Rows: 1
• Connector Type: Header, Cuttable
• Contact Type: Male Pin
• Mounting Type: Through Hole
• Termination: Solder
• Contact Length - Mating: 0.200" (5.08mm)
• Contact Length - Post: 0.118" (3.00mm)
• Overall Contact Length: 0.377" (9.58mm)
• Insulation Height: 0.059" (1.50mm)
• Contact Material: Phosphor Bronze
• Insulation Material: Liquid Crystal Polymer (LCP)
• Operating Temperature: -55°C ~ 125°C
• Current Rating: 3A
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The MTMM-110-05-S-S-200 qualifies as a direct substitute based on complete alignment across all specified electrical, mechanical, and environmental parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the MTMM-110-05-SM-S-200 and MTMM-110-05-S-S-200 are active products manufactured by Samtec Inc. with identical electrical, mechanical, and environmental specifications. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. Selection between these parts may be based on inventory availability, lead time, or supply chain considerations, as they are functionally equivalent for all specified applications.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the MTMM-110-05-SM-S-200?

A: A substitute part must match all critical parameters including 2.00mm pitch spacing, 10-position single-row configuration, through-hole mounting, solder termination, phosphor bronze contacts with gold mating finish, LCP insulation, -55°C to 125°C operating range, 3A current rating, and UL94 V-0 flammability rating.

Q: Are the MTMM-110-05-SM-S-200 and MTMM-110-05-S-S-200 interchangeable?

A: Yes. Both parts share identical specifications across all electrical, mechanical, and environmental parameters and are direct substitutes for one another.

Q: What is the difference between these two part numbers?

A: The provided specifications indicate no functional or dimensional differences between these parts. Differences in part numbering may reflect manufacturing process variations or internal Samtec classification, but both parts meet identical performance requirements.

Q: Can these connectors be used in high-temperature applications?

A: Yes. Both parts are rated for operating temperatures from -55°C to 125°C and are suitable for applications within this thermal range.

Q: Are these parts RoHS compliant?

A: Yes. Both the MTMM-110-05-SM-S-200 and MTMM-110-05-S-S-200 are ROHS3 compliant.