MTI-1-0I Equivalent & Substitute Parts

Part Overview

The MTI-1-0I is a 9-axis inertial measurement unit (IMU) manufactured by Xsens Technologies BV, integrating accelerometer, gyroscope, and magnetometer sensors in a single module. The device supports multiple communication protocols including I2C, SPI, and UART, making it suitable for motion tracking and orientation sensing applications. The MTI-1-0I is classified as obsolete, necessitating identification of active equivalent components for new designs and ongoing production requirements. Substitute parts must maintain functional equivalence across sensor types, communication interfaces, and environmental operating specifications.

Substiute Parts

MTI-1-0I

Xsens Technologies BVIn Stock: 764MTI-1-0I Datasheet

Current PartRFQ

MTI-1-5A-T

Xsens Technologies BVIn Stock: 716MTI-1-5A-T Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MTI-1-0I are identified based on strict equivalence across the following critical parameters:

Functional Equivalence Criteria:

• Sensor configuration: 9-axis integration (accelerometer, gyroscope, magnetometer)
• Communication protocols: I2C, SPI, and UART support
• Operating temperature range: -40°C to 85°C
• Series family: MTi 1 platform
• Mounting technology: Surface mount assembly
• Environmental compliance: ROHS3 and REACH standards

Mechanical Compatibility Criteria:

• Package type: 28-pin module configuration
• Supplier device package classification
• Moisture sensitivity level: MSL 3 (168 hours)

The MTI-1-5A-T qualifies as a direct substitute based on identical sensor functionality, communication interface support, operating temperature specifications, and compliance certifications. Differences in package designation (28-LCC versus 28-SMD Module) and product status (Active versus Obsolete) do not preclude substitution when mechanical footprint compatibility is verified.

Parameter Comparison

Engineering Selection Recommendations

MTI-1-5A-T Selection Basis:

The MTI-1-5A-T is the manufacturer-recommended substitute for the obsolete MTI-1-0I. Selection of this component is supported by the following engineering factors:

1. Functional Continuity: Both components maintain identical sensor integration (9-axis accelerometer, gyroscope, magnetometer) and communication protocol support (I2C, SPI, UART), ensuring software and firmware compatibility.

2. Environmental Specification Alignment: Operating temperature range (-40°C to 85°C) and moisture sensitivity classification (MSL 3, 168 hours) are identical, permitting direct substitution in equivalent thermal and humidity environments.

3. Regulatory Compliance: Both components satisfy ROHS3 and REACH requirements, maintaining compliance with current environmental and hazardous substance regulations.

4. Product Status: The MTI-1-5A-T holds active product status with confirmed inventory availability (682 units), ensuring long-term supply chain viability compared to the obsolete MTI-1-0I.

5. Series Continuity: Both components belong to the MTi 1 series platform, confirming manufacturer lineage and design compatibility.

Implementation Consideration:

Package designation differences (28-SMD Module versus 28-LCC/28-PLCC) require mechanical footprint verification during board layout design. Consult component datasheets and PCB layout guidelines to confirm pin-to-pad compatibility and solder joint specifications.

Frequently Asked Questions (FAQ)

Q: Can the MTI-1-5A-T directly replace the MTI-1-0I in existing designs?

A: The MTI-1-5A-T provides functional equivalence across sensor types, communication protocols, and operating specifications. However, package designation differences necessitate verification of mechanical compatibility. PCB footprint, pin pitch, and solder joint specifications must be confirmed against component datasheets before implementation.

Q: Are the communication protocols identical between MTI-1-0I and MTI-1-5A-T?

A: Both components support I2C, SPI, and UART output types. Firmware and software implementations developed for the MTI-1-0I are compatible with the MTI-1-5A-T without protocol-level modifications.

Q: What is the significance of the package designation difference (28-SMD Module versus 28-LCC)?

A: Package designation indicates the physical form factor and pin configuration. While both are 28-pin surface mount modules, the specific package type (SMD Module versus LCC/PLCC) affects PCB footprint dimensions, pin spacing, and mounting requirements. Mechanical compatibility must be verified during design integration.

Q: Do both components meet current environmental compliance standards?

A: Both the MTI-1-0I and MTI-1-5A-T are ROHS3 compliant and REACH unaffected, satisfying current environmental and hazardous substance regulations applicable to electronic components.

Q: Why is the MTI-1-0I classified as obsolete?

A: Obsolete status indicates the component is no longer manufactured or supported by the original equipment manufacturer. The MTI-1-5A-T, with active product status, represents the current production equivalent within the MTi 1 series.

Q: Are the operating temperature ranges identical?

A: Both components operate across the identical temperature range of -40°C to 85°C, permitting substitution in equivalent thermal environments without derating or specification adjustment.

Q: What does MSL 3 (168 Hours) indicate?

A: Moisture Sensitivity Level 3 specifies that the component can be exposed to moisture conditions for up to 168 hours before solder reflow processing. Both components share this classification, ensuring equivalent handling and storage requirements.