MTG206N Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The MTG206N is a panel-mounted toggle switch manufactured by TE Connectivity ALCOSWITCH Switches, configured as a Double-Pole Double-Throw (DPDT) switch with On-On functionality. This switch is rated for 6A at 125V AC and 4A at 28V DC, featuring a standard round actuator with solder lug termination and epoxy-sealed terminals. The product is currently active in production with 779 pieces in stock.

Equivalent and substitute parts are identified to provide alternative sourcing options when the primary MTG206N is unavailable, when supply chain requirements necessitate multiple qualified suppliers, or when design specifications permit operation within the electrical and mechanical parameters of functionally equivalent alternatives.

Substiute Parts

MTG206N

TE Connectivity ALCOSWITCH SwitchesIn Stock: 886MTG206N Datasheet

Current PartRFQ

100DP1T8B13M1QEH

E-SwitchIn Stock: 6804100DP1T8B13M1QEH Datasheet

SimilarRFQ

7201TZQE

C&KIn Stock: 48487201TZQE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MTG206N are qualified based on the following electrical and mechanical parameters:

Electrical Compatibility Criteria:

• Circuit configuration must be DPDT
• Switch function must be On-On
• Current rating must support the application requirements (minimum 5A AC/DC for general substitution)
• Voltage ratings must equal or exceed the application voltage (125V AC minimum, 28V DC)
• Termination style must be solder lug for PCB or panel assembly compatibility

Mechanical Compatibility Criteria:

• Mounting type must be panel mount
• Actuator type must be standard round
• Panel cutout dimensions must be circular with diameter within acceptable tolerance (11.91mm to 11.94mm)
• Bushing thread must be 15/32-32 for panel mounting compatibility
• Non-illuminated configuration required

Operational Criteria:

• Operating temperature range must encompass or exceed -20°C to 80°C
• Epoxy-sealed terminals required for environmental protection

The substitute parts 100DP1T8B13M1QEH (E-Switch) and 7201TZQE (C&K) meet these criteria with the following considerations: both are rated at 5A AC/DC with 120V AC and 28V DC, both feature identical panel cutout dimensions and bushing threads, and both include epoxy-sealed terminals. Differences in actuator length, electrical life, and operating temperature range are noted in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

MTG206N (TE Connectivity ALCOSWITCH Switches): The MTG206N is the primary specification part with active product status. This part is suitable for applications requiring 6A AC current capacity at 125V AC. The part is RoHS non-compliant and REACH-affected, which may restrict use in certain regulated markets or applications with environmental compliance requirements.

100DP1T8B13M1QEH (E-Switch): This substitute is suitable for applications where RoHS3 compliance and REACH-unaffected status are required. The 5A AC rating is lower than the MTG206N, making this part appropriate for applications with maximum AC current requirements of 5A or less. The 5A DC rating exceeds the MTG206N specification. The extended operating temperature range (-30°C to 85°C) provides broader environmental coverage. The 40,000-cycle electrical life is lower than the MTG206N and should be evaluated against application duty cycle requirements.

7201TZQE (C&K): This substitute provides RoHS3 compliance with REACH-affected status. The 5A AC/DC rating is lower than the MTG206N AC specification but higher than the MTG206N DC specification. The 100,000-cycle electrical life exceeds both the MTG206N and the E-Switch alternative, making this part suitable for high-cycle applications. The extended operating temperature range (-30°C to 85°C) matches the E-Switch alternative.

Compliance Considerations: Applications requiring RoHS3 compliance should specify either 100DP1T8B13M1QEH or 7201TZQE. Applications requiring REACH-unaffected status must use 100DP1T8B13M1QEH exclusively. Applications with no compliance restrictions may use any of the three parts within their respective electrical ratings.

Frequently Asked Questions (FAQ)

Q: Can the 100DP1T8B13M1QEH substitute for the MTG206N in all applications?

A: The 100DP1T8B13M1QEH is suitable for applications where the AC current requirement does not exceed 5A and the DC current requirement does not exceed 5A. The MTG206N is rated for 6A AC and 4A DC. Applications requiring 6A AC operation must use the MTG206N or evaluate the 7201TZQE if 5A AC is acceptable. The 100DP1T8B13M1QEH provides superior DC current capacity at 5A compared to the MTG206N at 4A DC.

Q: What is the impact of the different actuator lengths on panel mounting?

A: The MTG206N has an actuator length of 11.50mm, while both substitute parts have longer actuators (18.00mm for E-Switch and 17.45mm for C&K). All three parts share identical panel cutout dimensions (11.91mm to 11.94mm diameter) and bushing threads (15/32-32), ensuring mechanical compatibility with standard panel mounting hardware. The longer actuators on the substitute parts may affect the visual appearance and ergonomic feel of the switch but do not prevent panel installation.

Q: How do the electrical life ratings affect part selection?

A: The MTG206N is rated for 80,000 cycles, the E-Switch 100DP1T8B13M1QEH for 40,000 cycles, and the C&K 7201TZQE for 100,000 cycles. Applications with high switching frequency or long service life requirements should evaluate the cumulative cycle count over the expected product lifetime. The 7201TZQE provides the highest cycle rating and is suitable for demanding applications.

Q: Are there panel cutout dimension differences between the three parts?

A: The MTG206N specifies a circular cutout of 11.94mm diameter, while both substitute parts specify 11.91mm diameter. These dimensions are within acceptable tolerance for standard panel mounting hardware and do not prevent interchangeability. The bushing thread specification (15/32-32) is identical across all three parts.

Q: What are the compliance implications of selecting a substitute part?

A: The MTG206N is RoHS non-compliant and REACH-affected. The E-Switch 100DP1T8B13M1QEH is RoHS3 compliant and REACH-unaffected, making it the only option for applications with strict environmental compliance requirements. The C&K 7201TZQE is RoHS3 compliant but REACH-affected. Applications subject to RoHS3 regulations must use either the E-Switch or C&K part. Applications subject to REACH restrictions must use the E-Switch part exclusively.

Q: Do all three parts support the same operating temperature range?

A: The MTG206N operates from -20°C to 80°C, while both substitute parts operate from -30°C to 85°C. The substitute parts provide extended temperature coverage at both the lower and upper limits. Applications operating outside the MTG206N temperature range require substitution with either the E-Switch or C&K part.

Q: Are the solder lug terminations compatible across all three parts?

A: All three parts feature solder lug termination, ensuring compatibility with standard PCB and panel assembly processes. The termination style is identical across the MTG206N, 100DP1T8B13M1QEH, and 7201TZQE.