MSS-26CL-GO Equivalent & Substitute Parts

Part Overview

The MSS-26CL-GO is a magnetic ball switch manufactured by Magnasphere Corp, configured as a SPST-NO (Single Pole Single Throw - Normally Open) device with wire leads termination. This component operates as a magnetic sensor module designed for applications requiring contact closure upon magnetic field detection. The MSS-26CL-GO is classified as obsolete product status. Identification of equivalent substitute parts is necessary to maintain design continuity and ensure procurement availability for new production runs and field replacements.

Substiute Parts

MSS-26CL-GO

Magnasphere CorpIn Stock: 962MSS-26CL-GO Datasheet

Current PartRFQ

MSS-301C-GO

Magnasphere CorpIn Stock: 1099MSS-301C-GO Datasheet

MFR RecommendedRFQ

MSS-301C-GRAY-GO

Magnasphere CorpIn Stock: 1144MSS-301C-GRAY-GO Datasheet

MFR RecommendedRFQ

MSS-301C-GREY

Magnasphere CorpIn Stock: 906MSS-301C-GREY Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MSS-26CL-GO are identified based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

• Manufacturer: Magnasphere Corp (same manufacturer ensures design consistency)
• Category: Magnetic Sensors (same functional category)
• Actuator Material: Magnet (same activation mechanism)
• Termination Style: Wire Leads (same electrical interface)
• Package / Case: Module (same physical form factor)

Secondary Considerations:

• Series: MSS-300 series represents active product line evolution from obsolete MSS series
• RoHS Compliance: All substitutes maintain ROHS3 Compliant status, meeting environmental regulations
• ECCN and HTSUS classifications remain consistent across all parts

The substitute parts listed below share the core magnetic sensor architecture and wire lead termination with the MSS-26CL-GO, enabling direct functional replacement in applications where the specific output type (SPST-NO vs. SPST-NC) and switch technology (ball switch vs. reed switch) are compatible with system requirements.

Parameter Comparison

Engineering Selection Recommendations

MSS-301C-GO is the primary substitute for applications requiring SPST-NC (Normally Closed) output configuration. This part maintains active product status within the MSS-300 series, ensuring long-term availability and supply chain stability. ROHS3 compliance exceeds the RoHS Compliant status of the original MSS-26CL-GO. The ball switch technology and wire leads termination provide direct functional compatibility with existing circuit designs, with the exception of output logic inversion (NO to NC).

MSS-301C-GREY and MSS-301C-GRAY-GO are alternative substitutes utilizing reed switch technology instead of ball switch architecture. Both parts operate with SPST-NC output configuration and maintain wire leads termination. These parts carry active product status and ROHS3 compliance. The reed switch design represents a technology variant within the MSS-300 series. MSS-301C-GREY and MSS-301C-GRAY-GO are functionally equivalent to each other, with packaging differentiation (Bulk vs. Box).

Product Status Consideration: All substitute parts carry active product status, providing superior long-term availability compared to the obsolete MSS-26CL-GO. Migration to active product lines ensures sustained component procurement and technical support.

Compliance Consideration: All substitutes maintain or exceed the environmental compliance standards of the original part, with ROHS3 Compliant status representing current regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can MSS-301C-GO directly replace MSS-26CL-GO in existing designs?

A: MSS-301C-GO shares identical manufacturer, magnetic sensor category, magnet actuator material, wire leads termination, and module package form factor. The primary difference is output type: MSS-301C-GO provides SPST-NC (Normally Closed) output, while MSS-26CL-GO provides SPST-NO (Normally Open) output. Direct replacement requires circuit logic verification to confirm NC output compatibility with system requirements.

Q: What is the difference between ball switch and reed switch variants?

A: MSS-26CL-GO and MSS-301C-GO utilize ball switch technology. MSS-301C-GREY and MSS-301C-GRAY-GO utilize reed switch technology. Both technologies employ magnetic actuation and wire leads termination. The selection between ball switch and reed switch depends on application-specific requirements for contact reliability, response characteristics, and environmental conditions.

Q: Are MSS-301C-GREY and MSS-301C-GRAY-GO interchangeable?

A: MSS-301C-GREY and MSS-301C-GRAY-GO are functionally equivalent magnetic reed switches with identical electrical specifications. The parts differ in packaging format: MSS-301C-GREY is supplied in Bulk packaging, while MSS-301C-GRAY-GO is supplied in Box packaging. Selection between these variants depends on procurement and inventory management requirements.

Q: Why is the MSS-26CL-GO classified as obsolete?

A: The MSS-26CL-GO is superseded by the active MSS-300 series products (MSS-301C-GO, MSS-301C-GREY, MSS-301C-GRAY-GO). Magnasphere Corp has transitioned product lines to the MSS-300 series, which provides enhanced compliance standards (ROHS3) and sustained manufacturing support.

Q: What compliance certifications apply to substitute parts?

A: All substitute parts carry ROHS3 Compliant status, meeting current environmental regulations for restricted substances. ECCN classification EAR99 and HTSUS code 8536.50.9065 apply to MSS-301C-GO and MSS-301C-GREY, ensuring consistent export and tariff classification with the original MSS-26CL-GO.

Q: Does wire leads termination remain consistent across all parts?

A: Yes. MSS-26CL-GO and all substitute parts (MSS-301C-GO, MSS-301C-GREY, MSS-301C-GRAY-GO) utilize wire leads termination style, ensuring electrical interface compatibility with existing PCB designs and connector systems.