MSP08A01100RGEJ Equivalent & Substitute Parts

Part Overview

The MSP08A01100RGEJ is a 7-resistor network array manufactured by Vishay Dale, featuring 100 Ohm resistors in an 8-SIP through-hole package. This component is classified as Active product status and is ROHS3 compliant. Equivalent and substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits component sourcing from alternative manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

MSP08A01100RGEJ

Vishay DaleIn Stock: 1278MSP08A01100RGEJ Datasheet

Current PartRFQ

4308R-101-101LF

Bourns Inc.In Stock: 15594308R-101-101LF Datasheet

MFR RecommendedRFQ

4608X-101-101LF

Bourns Inc.In Stock: 39174608X-101-101LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MSP08A01100RGEJ are qualified based on the following criteria:

• Identical resistance value: 100 Ohm
• Matching tolerance: ±2%
• Equivalent circuit configuration: Bussed 7-resistor network
• Identical power rating per element: 200mW
• Matching temperature coefficient: ±100ppm/°C
• Identical pin count: 8 pins
• Compatible package: 8-SIP through-hole
• Operating temperature range: -55°C ~ 125°C
• RoHS3 compliance maintained

The substitute parts listed below meet all these electrical and mechanical parameters, enabling direct functional replacement in applications where the MSP08A01100RGEJ is specified.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain Active product status and ROHS3 compliance, ensuring regulatory alignment with the original MSP08A01100RGEJ specification.

The 4308R-101-101LF (Bourns 4300R series) is supplied in Tube packaging and matches the seated height of the original part at 0.195" (4.95mm), providing optimal compatibility for PCB assembly processes with consistent component height profiles.

The 4608X-101-101LF (Bourns 4600X series) is supplied in Bulk packaging and features a maximum seated height of 0.200" (5.08mm), representing a 0.05mm variance from the original specification. This minor dimensional difference remains within typical PCB assembly tolerances for through-hole components.

Both Bourns alternatives are electrically and functionally equivalent to the MSP08A01100RGEJ and support identical circuit applications.

Frequently Asked Questions (FAQ)

Q: Can the 4308R-101-101LF and 4608X-101-101LF be used interchangeably with the MSP08A01100RGEJ?

A: Both parts meet the electrical specifications (100 Ohm, ±2% tolerance, 200mW per element, ±100ppm/°C temperature coefficient) and mechanical requirements (8-SIP through-hole package, 8 pins, -55°C to 125°C operating range). The 4308R-101-101LF maintains identical seated height (0.195"), while the 4608X-101-101LF has a maximum seated height of 0.200" (5.08mm). Both are suitable for direct substitution in applications where the MSP08A01100RGEJ is specified.

Q: What is the difference between the two substitute parts?

A: The primary differences are manufacturer series designation (4300R vs. 4600X), packaging format (Tube vs. Bulk), and maximum seated height (0.195" vs. 0.200"). All electrical parameters remain identical. The choice between them depends on procurement requirements and assembly process specifications.

Q: Are there any compliance or certification differences?

A: All three parts are ROHS3 compliant and Active product status. The 4308R-101-101LF carries REACH Affected status, while the 4608X-101-101LF is REACH Unaffected. Both maintain EAR99 ECCN classification and identical HTSUS codes (8533.21.0050).

Q: What parameters must remain constant for substitution?

A: Substitution requires matching resistance value (100 Ohm), tolerance (±2%), circuit type (Bussed), number of resistors (7), power per element (200mW), temperature coefficient (±100ppm/°C), pin count (8), package type (8-SIP), and operating temperature range (-55°C to 125°C).