MSG-6030 RF Absorbing/Shielding Sheet - Equivalent & Substitute Parts

Part Overview

The MSG-6030 is an RF EMI absorbing and shielding sheet manufactured by 3M, designed for electromagnetic interference mitigation applications. This product is currently classified as obsolete, making identification of suitable substitute components essential for ongoing procurement and system maintenance. The MSG-6030 features a copper foil construction with single-sided conductive adhesive, supplied in a rectangular sheet format with dimensions of 32.810 feet (10.00m) length by 15.158 inches (385.00mm) width and 0.014 inches (0.35mm) thickness.

Substiute Parts

MSG-6030

3MIn Stock: 867MSG-6030 Datasheet

Current PartRFQ

MSG6030F

3MIn Stock: 1085MSG6030F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for RF absorbing and shielding sheets is determined by the following critical parameters: product type classification, material composition, adhesive system, dimensional specifications (length, width, and thickness), and regulatory compliance status.

The MSG6030F has been identified as a substitute option. While this part maintains the same functional category (Absorbing/Shielding Sheet) and manufacturer (3M), it introduces variations in the following parameters:

• Material composition changes from copper foil to nickel-copper (NI/CU) fabric
• Adhesive system changes from single-sided conductive adhesive to acrylic-based pressure-sensitive adhesive (PSA)
• Dimensional specifications differ: length 42.651 feet (13.00m), width 11.811 inches (300.00mm), thickness 0.012 inches (0.30mm)
• Product status transitions from obsolete to active
• Packaging format changes from standard to box configuration

These variations indicate that MSG6030F serves as a functional alternative within the MSG series for RF EMI shielding applications, though direct dimensional and material compatibility must be evaluated for specific end-use requirements.

Parameter Comparison

Engineering Selection Recommendations

The MSG-6030 is classified as obsolete, necessitating evaluation of alternative components for new procurement activities. The MSG6030F represents an active product within the 3M MSG series and maintains equivalent export control classification (EAR99) and moisture sensitivity rating (Not Applicable).

Selection between these components must account for the following provided specifications: material composition differences (copper foil versus nickel-copper fabric), adhesive system variations (single-sided conductive versus acrylic PSA), and dimensional parameter changes. The MSG6030F's active product status ensures ongoing manufacturer support and supply chain availability.

Both components satisfy identical regulatory compliance requirements as specified in the provided data. Component selection should be based on dimensional fit requirements, material compatibility with target applications, and adhesive performance characteristics specific to the intended installation environment.

Frequently Asked Questions (FAQ)

Q: Why is MSG-6030 being phased out? A: The MSG-6030 is classified as obsolete by the manufacturer. The MSG6030F represents the active alternative within the MSG series for RF EMI shielding applications.

Q: What are the primary differences between MSG-6030 and MSG6030F? A: The primary differences are material composition (copper foil versus nickel-copper fabric), adhesive system (single-sided conductive versus acrylic PSA), and dimensional specifications (length, width, and thickness). The MSG6030F is supplied in tape format rather than rectangular sheet format.

Q: Are both parts classified under the same export control regulations? A: Yes. Both MSG-6030 and MSG6030F are classified as EAR99 under export control regulations and carry identical ECCN classification.

Q: What packaging formats are available? A: MSG-6030 is supplied in standard packaging. MSG6030F is supplied in box packaging configuration.

Q: Do both products have identical moisture sensitivity requirements? A: Yes. Both components are rated as Not Applicable for Moisture Sensitivity Level (MSL), indicating no special moisture control measures are required during storage or handling.