MSAST063SCG561JFNA01 Equivalent & Substitute Parts

Part Overview

The MSAST063SCG561JFNA01 is a 560 pF ceramic capacitor manufactured by Taiyo Yuden, rated for 25V with C0G/NP0 temperature coefficient characteristics. This surface-mount multilayer ceramic capacitor (MLCC) is packaged in 0201 (0603 Metric) form factor and is suitable for general-purpose applications requiring stable capacitance across the operating temperature range of -55°C to 125°C. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent substitute parts are identified for applications requiring alternative sourcing, inventory management, or design flexibility while maintaining identical electrical and mechanical specifications.

Substiute Parts

MSAST063SCG561JFNA01

Taiyo YudenIn Stock: 947MSAST063SCG561JFNA01 Datasheet

Current PartRFQ

TMK063CG561JT-F

Taiyo YudenIn Stock: 34581TMK063CG561JT-F Datasheet

Parametric EquivalentRFQ

GRM0335C1E561JA01D

Murata ElectronicsIn Stock: 469504GRM0335C1E561JA01D Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MSAST063SCG561JFNA01 are qualified based on strict electrical and mechanical parameter equivalence. All identified substitutes maintain identical specifications across the following critical parameters:

• Capacitance value: 560 pF
• Capacitance tolerance: ±5%
• Voltage rating: 25V
• Temperature coefficient: C0G/NP0
• Operating temperature range: -55°C to 125°C
• Package designation: 0201 (0603 Metric)
• Physical dimensions: 0.024" L x 0.012" W (0.60mm x 0.30mm)
• Maximum thickness: 0.013" (0.33mm)
• Mounting technology: Surface Mount, MLCC
• Compliance certifications: ROHS3, REACH Unaffected, EAR99

Substitution is valid when all parameters listed above are matched between the main part and substitute part. Differences in manufacturer, series designation, or product status do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

MSAST063SCG561JFNA01 (Primary Selection)

The MSAST063SCG561JFNA01 maintains Active product status and is the recommended selection for new designs. This part is manufactured by Taiyo Yuden and carries full compliance certifications including ROHS3 and REACH Unaffected status. Current inventory availability is 881 pieces.

GRM0335C1E561JA01D (Preferred Substitute)

The GRM0335C1E561JA01D manufactured by Murata Electronics is electrically and mechanically equivalent to the primary part and maintains Active product status. This substitute is suitable for new designs and offers significantly higher inventory availability at 469,442 pieces. Selection of this substitute is appropriate when Murata sourcing is preferred or when inventory continuity is a priority.

TMK063CG561JT-F (Legacy Substitute)

The TMK063CG561JT-F is electrically and mechanically equivalent but carries Not For New Designs product status. This part is suitable only for legacy system maintenance, repair, or replacement applications where the original part specification must be maintained. This substitute is not appropriate for new design implementations.

All three parts satisfy identical electrical performance requirements, mechanical compatibility, and regulatory compliance standards. Selection between active-status parts (MSAST063SCG561JFNA01 and GRM0335C1E561JA01D) is based on manufacturer preference, supply chain strategy, and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can TMK063CG561JT-F be used in new product designs?

A: No. The TMK063CG561JT-F carries Not For New Designs product status. For new designs, select either MSAST063SCG561JFNA01 or GRM0335C1E561JA01D, both of which maintain Active status.

Q: Are all three parts mechanically interchangeable?

A: Yes. All three parts share identical package designation (0201 / 0603 Metric), physical dimensions (0.024" L x 0.012" W), and maximum thickness (0.013"). They are directly interchangeable on PCB layouts without modification.

Q: What is the difference between C0G and NP0 temperature coefficients?

A: C0G and NP0 designations refer to the same temperature coefficient characteristic. C0G is the EIA designation; NP0 is the IEC designation. Both indicate zero temperature coefficient performance across the operating range.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. All three parts are ROHS3 compliant, REACH Unaffected, and carry EAR99 ECCN classification. All maintain MSL 1 (Unlimited) moisture sensitivity rating.

Q: Which substitute offers the best inventory availability?

A: GRM0335C1E561JA01D (Murata Electronics) offers the highest inventory availability at 469,442 pieces, compared to 881 pieces for MSAST063SCG561JFNA01 and 34,511 pieces for TMK063CG561JT-F.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the existing design is not locked to a specific manufacturer part number through qualification or procurement specifications. All three parts deliver identical electrical performance and mechanical fit.

Q: What is the significance of the 0201 package designation?

A: The 0201 package (0603 Metric) is a surface-mount form factor measuring 0.024" x 0.012" (0.60mm x 0.30mm). This is one of the smallest standard MLCC packages and is used in space-constrained applications. All substitute parts use this identical package.