MSASH105SB7102MFNA01 Equivalent & Substitute Parts

Part Overview

The MSASH105SB7102MFNA01 is a 1000 pF ceramic capacitor manufactured by Taiyo Yuden, rated for 100V with X7R temperature coefficient in 0402 (1005 Metric) surface mount package. This component is classified as Active product status and is suitable for general purpose applications. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design revisions require alternative sourcing from the same manufacturer's product portfolio.

Substiute Parts

MSASH105SB7102MFNA01

Taiyo YudenIn Stock: 1111MSASH105SB7102MFNA01 Datasheet

Current PartRFQ

HMK105B7102MV-F

Taiyo YudenIn Stock: 9996HMK105B7102MV-F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MSASH105SB7102MFNA01 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 1000 pF
• Tolerance: ±20%
• Voltage rating: 100V
• Temperature coefficient: X7R

Mechanical Parameters:

• Package type: 0402 (1005 Metric)
• Mounting type: Surface Mount, MLCC
• Physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm)
• Maximum thickness: 0.022" (0.55mm)

Compliance Parameters:

• RoHS3 Compliance
• REACH Unaffected status
• Moisture Sensitivity Level 1

The substitute part HMK105B7102MV-F meets all electrical, mechanical, and compliance requirements for direct substitution. Differences in product status and application classification do not affect functional equivalence in circuit operation.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: MSASH105SB7102MFNA01

The MSASH105SB7102MFNA01 is the recommended choice for new designs. This part carries Active product status, indicating ongoing manufacturer support, continued availability, and full qualification for production use. The component is ROHS3 compliant and REACH unaffected, meeting current regulatory requirements. Current inventory of 1052 pieces supports immediate procurement.

Alternative Selection: HMK105B7102MV-F

The HMK105B7102MV-F is a parametric equivalent suitable for substitution in existing designs or when primary part availability is constrained. This part is designated as Not For New Designs, indicating it remains in production for legacy support but is not recommended for new product development. All electrical, mechanical, and compliance parameters are identical to the primary part. Higher inventory availability (9969 pieces) may support expedited procurement in supply-constrained scenarios. Both parts are manufactured by Taiyo Yuden and share identical ROHS3 and REACH compliance status.

Frequently Asked Questions (FAQ)

Q: Can HMK105B7102MV-F be used as a direct replacement for MSASH105SB7102MFNA01?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical capacitance (1000 pF), tolerance (±20%), voltage rating (100V), temperature coefficient (X7R), operating temperature range (-55°C ~ 125°C), package type (0402), and physical dimensions. Both are ROHS3 compliant with MSL 1 rating.

Q: What is the difference between these two parts?

A: The primary difference is product status. MSASH105SB7102MFNA01 is Active, while HMK105B7102MV-F is Not For New Designs. This distinction reflects manufacturer support lifecycle, not functional capability. Both parts perform identically in circuit applications.

Q: Are there any package or footprint differences?

A: No. Both parts use the 0402 (1005 Metric) surface mount package with identical dimensions of 0.039" L x 0.020" W (1.00mm x 0.50mm) and maximum thickness of 0.022" (0.55mm). PCB footprints are interchangeable.

Q: Which part should be selected for new product designs?

A: MSASH105SB7102MFNA01 is the appropriate choice for new designs due to its Active product status, ensuring long-term availability and manufacturer support.

Q: Are both parts compliant with current environmental regulations?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic components.

Q: What is the moisture sensitivity level for these capacitors?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.