MSASE042SCG5R6DWNA01 Equivalent & Substitute Parts

Part Overview

The MSASE042SCG5R6DWNA01 is a 5.6 pF ceramic capacitor manufactured by Taiyo Yuden, rated for 16V operation with C0G/NP0 temperature coefficient characteristics. This surface-mount multilayer ceramic capacitor (MLCC) is packaged in 01005 (0402 Metric) form factor and is classified as Active product status. Identification of equivalent and substitute parts becomes necessary when the primary part experiences supply constraints, inventory limitations, or when design flexibility permits component standardization across manufacturing batches.

Substiute Parts

MSASE042SCG5R6DWNA01

Taiyo YudenIn Stock: 855MSASE042SCG5R6DWNA01 Datasheet

Current PartRFQ

C0402C0G1C5R6D

TDK CorporationIn Stock: 14940C0402C0G1C5R6D Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MSASE042SCG5R6DWNA01 is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters must match identically for a part to function as a direct substitute:

Electrical Parameters (Non-Negotiable):

• Capacitance value: 5.6 pF
• Tolerance: ±0.5 pF
• Voltage rating: 16V (equal or higher)
• Temperature coefficient: C0G/NP0

Mechanical Parameters (Non-Negotiable):

• Package / Case: 01005 (0402 Metric)
• Mounting type: Surface Mount, MLCC
• Physical dimensions: 0.016" L x 0.008" W (0.40mm x 0.20mm)
• Maximum thickness: 0.009" (0.22mm)

Environmental & Compliance Parameters:

• Operating temperature range: -55°C to 125°C
• Moisture sensitivity level: 1 (Unlimited)
• RoHS3 compliance
• REACH unaffected status

The identified substitute part C0402C0G1C5R6D from TDK Corporation meets all specified parameters and qualifies as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection: The MSASE042SCG5R6DWNA01 (Taiyo Yuden) maintains Active product status and is recommended as the primary selection for new designs and ongoing production. This part carries full manufacturer support and guaranteed long-term availability.

Substitute Part Consideration: The C0402C0G1C5R6D (TDK Corporation) provides complete electrical and mechanical equivalence and is suitable for applications where supply of the primary part is constrained. However, this part carries Obsolete product status, indicating discontinued manufacturing and limited future availability. Use of this substitute should be restricted to situations where supply of the primary part is unavailable.

Compliance Status: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying environmental and regulatory requirements for current manufacturing standards.

Packaging Consideration: The primary part is supplied in Tape & Reel (TR) packaging, while the substitute is supplied in Cut Tape (CT) packaging. This difference affects handling, storage, and automated assembly processes but does not impact electrical or mechanical performance.

Frequently Asked Questions (FAQ)

Q: Can C0402C0G1C5R6D be used as a direct replacement for MSASE042SCG5R6DWNA01?

A: Yes. The C0402C0G1C5R6D meets all electrical and mechanical specifications required for direct substitution. Both parts share identical capacitance (5.6 pF), tolerance (±0.5 pF), voltage rating (16V), temperature coefficient (C0G/NP0), operating temperature range (-55°C to 125°C), package type (01005/0402 Metric), and physical dimensions. Compliance certifications (ROHS3, REACH) are equivalent.

Q: What is the difference between the primary part and substitute in terms of product status?

A: The MSASE042SCG5R6DWNA01 is classified as Active, indicating current production and manufacturer support. The C0402C0G1C5R6D is classified as Obsolete, indicating discontinued manufacturing. For new designs, the Active part is preferred. The Obsolete part should be used only when the Active part is unavailable.

Q: Are there packaging differences between these parts?

A: Yes. The MSASE042SCG5R6DWNA01 is supplied in Tape & Reel (TR) packaging, while the C0402C0G1C5R6D is supplied in Cut Tape (CT) packaging. This affects handling and automated assembly processes but does not impact component performance or PCB compatibility.

Q: Will the substitute part fit the same PCB footprint?

A: Yes. Both parts use the identical 01005 (0402 Metric) package with dimensions of 0.016" L x 0.008" W (0.40mm x 0.20mm) and maximum thickness of 0.009" (0.22mm). PCB footprints and assembly processes remain unchanged.

Q: Are the electrical characteristics identical between these parts?

A: Yes. Both parts provide 5.6 pF capacitance with ±0.5 pF tolerance, 16V voltage rating, and C0G/NP0 temperature coefficient. Operating temperature range is -55°C to 125°C for both parts. Moisture sensitivity level is 1 (Unlimited) for both.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant and REACH unaffected. These certifications satisfy current environmental and chemical substance regulations for electronic component manufacturing and use.