MS560702BA03-00 Equivalent & Substitute Parts

Part Overview

The MS560702BA03-00 is a surface-mount absolute pressure sensor manufactured by TE Connectivity Measurement Specialties. This component operates across a pressure range of 0.15PSI to 17.4PSI (1kPa to 120kPa) with 24-bit digital output via I2C and SPI interfaces. The sensor is housed in an 8-SMD package and operates across industrial temperature ranges from -40°C to 85°C.

The MS560702BA03-00 is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this pressure sensor.

Substiute Parts

MS560702BA03-00

TE Connectivity Measurement SpecialtiesIn Stock: 888MS560702BA03-00 Datasheet

Current PartRFQ

MS560702BA03-50

TE Connectivity Measurement SpecialtiesIn Stock: 25215MS560702BA03-50 Datasheet

DirectRFQ

MS561101BA03-50

TE Connectivity Measurement SpecialtiesIn Stock: 5595MS561101BA03-50 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MS560702BA03-00 is determined by strict equivalence across the following critical parameters:

Pressure Specifications: Operating pressure range of 0.15PSI to 17.4PSI (1kPa to 120kPa) absolute, maximum pressure rating of 87.02PSI (600kPa), and accuracy of ±0.022PSI (±0.15kPa) must remain constant.

Electrical Interface: Output type must support both I2C and SPI protocols with 24-bit resolution. Supply voltage range of 1.8V to 3.6V must be maintained.

Physical Form Factor: Package type must be 8-SMD with SMD (SMT) Tab termination style for surface-mount board integration.

Environmental Compliance: Operating temperature range of -40°C to 85°C and Moisture Sensitivity Level 1 (Unlimited) must be preserved.

Manufacturer Consistency: All substitute parts are sourced from TE Connectivity Measurement Specialties to ensure design validation and support continuity.

Substitute parts are grouped into two categories: direct equivalents (identical base product number MS5607) and similar alternatives (different base product number MS5611) that meet all electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

MS560702BA03-50 (Direct Equivalent): This part is the primary substitute for the obsolete MS560702BA03-00. Both components share the identical base product number MS5607 and maintain complete electrical and mechanical parameter equivalence. The MS560702BA03-50 carries Active product status with ROHS3 compliance and REACH Unaffected certification, providing regulatory assurance for new designs and ongoing production. This part is available in Cut Tape (CT) and Digi-Reel® packaging formats with 25,130 units in stock, ensuring supply continuity.

MS561101BA03-50 (Similar Alternative): This part functions as a secondary substitute based on equivalent electrical performance and physical form factor. While the base product number differs (MS5611 versus MS5607), all critical pressure specifications, output characteristics, supply voltage, operating temperature, and package dimensions remain identical. The MS561101BA03-50 is Active with ROHS3 compliance and REACH Unaffected status. This alternative is suitable when MS560702BA03-50 availability is constrained, with 5,508 units currently in stock.

Both substitute parts are manufactured by TE Connectivity Measurement Specialties and are suitable for direct replacement in board-mount applications requiring absolute pressure measurement across the 0.15PSI to 17.4PSI range with I2C/SPI digital output.

Frequently Asked Questions (FAQ)

Q: Can MS560702BA03-50 be used as a direct replacement for MS560702BA03-00?

A: Yes. The MS560702BA03-50 is a direct equivalent substitute. Both parts share identical pressure specifications (0.15PSI to 17.4PSI), 24-bit I2C/SPI output, supply voltage (1.8V to 3.6V), operating temperature range (-40°C to 85°C), and 8-SMD package configuration. The primary difference is product status: MS560702BA03-00 is obsolete while MS560702BA03-50 is active with current manufacturing support.

Q: What is the difference between MS560702BA03-50 and MS561101BA03-50?

A: Both parts meet identical electrical and mechanical specifications for pressure measurement, output resolution, supply voltage, and operating temperature. The difference lies in the base product number (MS5607 versus MS5611). MS560702BA03-50 is the preferred substitute due to base product number alignment with the original MS560702BA03-00. MS561101BA03-50 serves as an alternative when MS560702BA03-50 is unavailable.

Q: Are there packaging differences between the substitute parts?

A: The MS560702BA03-00 packaging format is not specified in available documentation. Both substitute parts (MS560702BA03-50 and MS561101BA03-50) are supplied in Cut Tape (CT) and Digi-Reel® formats, which are standard for high-volume surface-mount component distribution.

Q: Do the substitute parts meet current regulatory requirements?

A: Yes. Both MS560702BA03-50 and MS561101BA03-50 are ROHS3 compliant and REACH Unaffected, meeting current environmental and regulatory standards for electronic components in industrial applications.

Q: What is the inventory status for these substitute parts?

A: MS560702BA03-50 has 25,130 units in stock. MS561101BA03-50 has 5,508 units in stock. Both are available as new original components from TE Connectivity Measurement Specialties.

Q: Are the substitute parts suitable for the same applications as the original MS560702BA03-00?

A: Yes. Both substitute parts are rated for board-mount applications with identical pressure measurement ranges, accuracy specifications, and environmental operating conditions. No application redesign is required for substitution.