MS3116F14-5P Equivalent & Substitute Parts

Part Overview

The MS3116F14-5P is a 5-position circular connector plug with male pins and solder cup termination, manufactured by Amphenol Industrial Operations. This connector conforms to MIL-DTL-26482 Series I specifications and is designed for aerospace, military, communication systems, and industrial instrumentation applications. The part is discontinued at DiGi Electronics, making equivalent substitutes necessary for ongoing procurement and system maintenance.

Substiute Parts

MS3116F14-5P

Amphenol Industrial OperationsIn Stock: 721MS3116F14-5P Datasheet

Current PartRFQ

MSW06E14-5P-SR

Milspecwest, LLCIn Stock: 889MSW06E14-5P-SR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MS3116F14-5P is determined by the following critical parameters:

• Connector type and pin configuration (Plug, Male Pins, 5 positions)
• Shell size designation (14-5)
• Fastening mechanism (Bayonet Lock)
• Termination method (Solder or Solder Cup)
• Operating temperature range (-55°C ~ 125°C minimum)
• Environmental resistance rating
• Mechanical compatibility with MIL-DTL-26482 Series I specifications

The MSW06E14-5P-SR qualifies as a direct substitute based on matching all critical mechanical and electrical parameters within the allowed specification envelope for this connector category.

Parameter Comparison

Engineering Selection Recommendations

The MSW06E14-5P-SR is a qualified substitute for the MS3116F14-5P based on the following factors:

• Both connectors maintain identical mechanical compatibility through matching shell size (14-5), fastening type (Bayonet Lock), and mounting configuration
• Operating temperature ranges are identical (-55°C ~ 125°C), ensuring thermal performance equivalence
• Both provide environment-resistant ingress protection suitable for aerospace and military applications
• The MSW06E14-5P-SR is currently active in production, addressing the discontinued status of the original part
• Both parts maintain MIL-DTL-26482 Series I compliance
• Termination method differs (Solder Cup vs. Solder), requiring assessment of specific PCB or cable assembly requirements

Selection should be based on termination compatibility with existing assembly processes and electrical performance requirements of the application.

Frequently Asked Questions (FAQ)

Q: What is the primary difference between the MS3116F14-5P and MSW06E14-5P-SR?

A: The main difference is product status and termination method. The MS3116F14-5P is discontinued, while the MSW06E14-5P-SR is active. The MS3116F14-5P uses solder cup termination, while the MSW06E14-5P-SR uses solder termination. Both maintain identical mechanical and environmental specifications.

Q: Are these connectors mechanically interchangeable?

A: Yes. Both connectors share the same shell size (14-5), fastening type (Bayonet Lock), and mounting configuration (Free Hanging In-Line), ensuring mechanical compatibility in applications designed for MIL-DTL-26482 Series I circular connectors.

Q: What are the electrical performance differences?

A: The MSW06E14-5P-SR provides specified electrical ratings (13A current, 800V voltage), while the MS3116F14-5P does not include published electrical ratings in standard documentation. Both operate across the same temperature range (-55°C ~ 125°C).

Q: Can I use the MSW06E14-5P-SR as a direct replacement in existing assemblies?

A: Mechanical and environmental compatibility is confirmed. However, termination method differences (Solder Cup vs. Solder) require assessment of your specific assembly process and cable or PCB interface requirements.

Q: Are both parts RoHS compliant?

A: No. Both the MS3116F14-5P and MSW06E14-5P-SR are RoHS non-compliant, maintaining consistency with military and aerospace application requirements.