MS3116F14-5P Equivalent & Substitute Parts

Part Overview

The MS3116F14-5P is a 5-position circular connector plug manufactured by ITT Cannon, LLC, featuring male pins with solder cup termination. This connector is part of the KPT series and is designed for free-hanging, in-line applications requiring bayonet lock fastening. The part maintains active product status with 695 units in current inventory.

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and environmental ratings can be maintained across the same connector category and shell size specifications.

Substiute Parts

MS3116F14-5P

ITT Cannon, LLCIn Stock: 784MS3116F14-5P Datasheet

Current PartRFQ

MSW06E14-5P-SR

Milspecwest, LLCIn Stock: 889MSW06E14-5P-SR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MS3116F14-5P is determined by strict alignment of the following parameters:

• Connector type classification (Plug, Male Pins)
• Position count (5 positions)
• Shell size and insert designation (14-5)
• Fastening mechanism (Bayonet Lock)
• Termination method (Solder-based)
• Current capacity (13A minimum)
• Operating temperature range (-55°C ~ 125°C)
• Environmental resistance rating

The MSW06E14-5P-SR meets these core substitution criteria as a 5-position circular connector plug with bayonet lock fastening, matching shell size 14-5, and equivalent current and temperature ratings.

Parameter Comparison

Engineering Selection Recommendations

Both the MS3116F14-5P and MSW06E14-5P-SR maintain active product status and are classified under identical export control designations (ECCN: EAR99). Both parts are RoHS non-compliant and designed for military applications.

The primary electrical difference is the voltage rating: the MS3116F14-5P supports 1000VAC and 1400VDC, while the MSW06E14-5P-SR is rated for 800V. Selection between these parts should be based on the specific voltage requirements of the application circuit.

Both connectors share identical current capacity (13A), operating temperature range (-55°C ~ 125°C), and mechanical compatibility through matching shell size 14-5 and bayonet lock fastening. Termination methods are both solder-based, ensuring equivalent assembly and rework procedures.

Frequently Asked Questions (FAQ)

Q: Can the MSW06E14-5P-SR directly replace the MS3116F14-5P in all applications?

A: Direct replacement is possible only when the application voltage requirement does not exceed 800V. The MS3116F14-5P supports higher voltage ratings (1000VAC, 1400VDC). Verify circuit voltage specifications before substitution.

Q: Are the shell sizes and pin configurations identical?

A: Yes. Both connectors use shell size 14-5 with 5 positions and bayonet lock fastening, ensuring mechanical and electrical interface compatibility.

Q: What are the differences in termination between these parts?

A: The MS3116F14-5P uses solder cup termination, while the MSW06E14-5P-SR uses solder termination. Both are solder-based methods suitable for equivalent assembly processes.

Q: Do both parts meet the same environmental and compliance standards?

A: Both parts are rated for environment-resistant applications, operate across -55°C ~ 125°C, carry EAR99 export classification, and are RoHS non-compliant. Compliance alignment supports interchangeability in regulated applications.

Q: What inventory considerations apply to these parts?

A: The MS3116F14-5P has 695 units in stock (bulk packaging), while the MSW06E14-5P-SR has 819 units available (bag packaging). Packaging format may affect procurement and handling procedures.