MS3114F12-8P Equivalent & Substitute Parts

Part Overview

The MS3114F12-8P is an 8-position circular connector receptacle manufactured by Amphenol Industrial Operations. This component is classified as a position circular connector and is currently in active product status with 903 units available in stock. The MS3114F12-8P serves as a receptacle interface in circular connector applications requiring standardized electrical and mechanical connectivity.

Identifying equivalent and substitute parts becomes necessary when managing component availability, supply chain optimization, or when design specifications permit alternative connector configurations that maintain functional compatibility within the same connector family and electrical parameters.

Substiute Parts

MS3114F12-8P

Amphenol Industrial OperationsIn Stock: 980MS3114F12-8P Datasheet

Current PartRFQ

MSW07E12-8P-SR

Milspecwest, LLCIn Stock: 1129MSW07E12-8P-SR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MS3114F12-8P are identified based on the following critical parameters that determine functional compatibility:

• Connector Type & Position Count: 8-position configuration
• Shell Size - Insert: 12-8 specification
• Category: Circular Connectors
• Electrical Ratings: Current and voltage capacity
• Mechanical Interface: Mounting type and fastening mechanism
• Environmental Specifications: Operating temperature range and ingress protection
• Termination Method: Connection type (solder, crimp, etc.)

The substitute part MSW07E12-8P-SR shares the core mechanical and electrical parameters necessary for functional substitution within applications where the MS3114F12-8P is specified, provided that design requirements permit the specific connector type and mounting configuration of the substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the MS3114F12-8P and MSW07E12-8P-SR maintain active product status, indicating ongoing manufacturer support and availability. The MS3114F12-8P is currently in stock with 903 units available. The MSW07E12-8P-SR is also in active status with 1049 units available.

Component selection between these parts must be based on design specifications that explicitly permit the mechanical and electrical characteristics of the substitute. The MSW07E12-8P-SR is specified as RoHS non-compliant, which may impact suitability for applications with RoHS compliance requirements. The RoHS status of the MS3114F12-8P is not provided in available documentation.

Selection should be confirmed against the complete design specification, including connector type requirements, mounting configuration, termination method, and regulatory compliance mandates specific to the application.

Frequently Asked Questions (FAQ)

Q: What are the primary criteria for determining if MSW07E12-8P-SR can substitute for MS3114F12-8P?

A: The substitute part shares the 8-position configuration and 12-8 shell size specification. Both are circular connectors in active product status. Substitution compatibility depends on whether the design specification permits the specific connector type (Plug, Male Pins), mounting method (Panel Mount, Bulkhead), fastening mechanism (Bayonet Lock), and termination type (Solder) of the MSW07E12-8P-SR.

Q: Are there electrical parameter differences between these parts?

A: The MSW07E12-8P-SR specifies 7.5A current rating and 800V voltage rating. The MS3114F12-8P electrical parameters are not provided in available documentation. Design specifications must confirm that the substitute part's electrical ratings meet or exceed application requirements.

Q: What is the significance of the RoHS non-compliant status of MSW07E12-8P-SR?

A: RoHS non-compliance indicates the part contains restricted substances. Applications subject to RoHS regulations or customer requirements mandating RoHS compliance cannot use this substitute. Verify regulatory requirements before selection.

Q: Do these parts have different operating temperature ranges?

A: The MSW07E12-8P-SR operates from -55°C to 125°C. The MS3114F12-8P operating temperature range is not specified in available documentation. Design specifications must confirm temperature compatibility for the intended application environment.

Q: What packaging formats are available?

A: The MS3114F12-8P is supplied in Bulk packaging. The MSW07E12-8P-SR packaging format is not specified in available documentation.