MS3114F10-98P Equivalent & Substitute Parts

Part Overview

The MS3114F10-98P is a 6-position circular connector receptacle with male pins, manufactured by Amphenol Industrial Operations. This connector is part of the Military MIL-DTL-26482 Series I product line and features solder cup termination with bayonet lock fastening. The part is discontinued at DiGi Electronics, making equivalent substitutes necessary for ongoing procurement and system maintenance in aerospace, military, and industrial applications.

Substiute Parts

MS3114F10-98P

Amphenol Industrial OperationsIn Stock: 1133MS3114F10-98P Datasheet

Current PartRFQ

MSW07E10-98P-SR

Milspecwest, LLCIn Stock: 924MSW07E10-98P-SR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MS3114F10-98P is determined by the following critical parameters:

• Shell Size and Insert Configuration: 10-98 (mechanical compatibility requirement)
• Number of Positions: 6 (pin count must match)
• Connector Gender and Pin Type: Receptacle with male pins (functional requirement)
• Mounting Configuration: Panel mount with bulkhead front side nut (installation compatibility)
• Fastening Mechanism: Bayonet lock (mating interface requirement)
• Operating Temperature Range: -55°C to 125°C (environmental specification)
• Series Compliance: MIL-DTL-26482 or equivalent military circular connector standard

The substitute part MSW07E10-98P-SR meets these core mechanical and electrical compatibility criteria, enabling direct functional replacement in applications requiring MIL-DTL-26482 style connectors.

Parameter Comparison

Engineering Selection Recommendations

MS3114F10-98P (Original Part)

• Discontinued status limits future procurement availability
• Amphenol Industrial Operations original specification
• Suitable for legacy system maintenance where original part specifications are required

MSW07E10-98P-SR (Active Substitute)

• Active product status ensures ongoing availability and supply chain continuity
• Meets MIL-DTL-26482 style connector requirements with identical shell size, position count, and mounting configuration
• Provides specified electrical ratings (7.5A at 800V) for applications requiring documented current and voltage parameters
• Operates within the same temperature range (-55°C to 125°C)
• RoHS non-compliant status requires verification against system compliance requirements
• Suitable for new designs and systems where MIL-DTL-26482 style connectors are specified

Selection between these parts depends on procurement constraints, compliance requirements, and whether the system design permits substitution of an active product for a discontinued original.

Frequently Asked Questions (FAQ)

Q: Can MSW07E10-98P-SR directly replace MS3114F10-98P in existing assemblies?

A: Both connectors share identical shell size (10-98), position count (6), mounting configuration (panel mount bulkhead), and fastening mechanism (bayonet lock). The primary difference is connector gender: MS3114F10-98P is a receptacle while MSW07E10-98P-SR is a plug. Compatibility depends on the mating connector type in your application. Verify the mating connector specification before substitution.

Q: What are the key mechanical compatibility requirements?

A: Shell size 10-98, 6-position configuration, bayonet lock fastening, and bulkhead front side nut mounting must remain constant. Both parts meet these requirements.

Q: Are there electrical rating differences?

A: MS3114F10-98P does not specify current or voltage ratings in the provided data. MSW07E10-98P-SR is rated for 7.5A at 800V. Verify that these ratings meet or exceed your application requirements before substitution.

Q: What is the operating temperature compatibility?

A: Both parts operate across -55°C to 125°C, ensuring thermal compatibility for military and aerospace applications.

Q: Does RoHS compliance affect substitution eligibility?

A: MSW07E10-98P-SR is RoHS non-compliant. If your system or end-use market requires RoHS compliance, this substitute may not be acceptable. Verify compliance requirements with your procurement and quality departments.

Q: What packaging differences exist?

A: MS3114F10-98P packaging is not specified. MSW07E10-98P-SR is supplied in bag packaging. Confirm packaging requirements for your inventory and assembly processes.