MS11-DMP6301A Equivalent & Substitute Parts

Part Overview

The MS11-DMP6301A is a DC Output Module manufactured by Sensata-Crydom, designed for 3A output applications with input voltage of 5VDC and output voltage range of 3 to 60VDC. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The module features DIN Rail Mount configuration with epoxy coating and fast switching response times of 0.50ms for both turn-on and turn-off operations.

Substiute Parts

MS11-DMP6301A

Sensata-CrydomIn Stock: 880MS11-DMP6301A Datasheet

Current PartRFQ

DRA1-CMX60D5

Sensata-CrydomIn Stock: 853DRA1-CMX60D5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The DRA1-CMX60D5 serves as a direct substitute based on the following alignment of critical electrical and mechanical parameters:

Voltage Compatibility: The DRA1-CMX60D5 accepts input voltage of 3 to 10VDC, which encompasses the MS11-DMP6301A's 5VDC input requirement. The load voltage range of 1V to 60V matches the output voltage specification of 3 to 60VDC.

Current Rating: The DRA1-CMX60D5 provides 5A load current capacity, which exceeds the MS11-DMP6301A's 3A output requirement, ensuring adequate margin for the same application.

Mounting Configuration: Both components utilize DIN Rail Mount configuration, maintaining mechanical compatibility in existing installations.

Manufacturer Continuity: Both parts are manufactured by Sensata-Crydom, ensuring consistent design philosophy and support infrastructure.

Product Status: The DRA1-CMX60D5 is classified as Active, providing long-term availability and supply chain stability compared to the obsolete MS11-DMP6301A.

Parameter Comparison

Engineering Selection Recommendations

The DRA1-CMX60D5 is the designated substitute for the MS11-DMP6301A based on electrical parameter compatibility and product lifecycle status. The substitute part maintains compliance with REACH regulations and export classification (EAR99), ensuring regulatory continuity. The active product status of the DRA1-CMX60D5 provides assured long-term availability, addressing the supply constraints associated with the obsolete MS11-DMP6301A. The increased current rating of 5A provides operational margin beyond the original 3A specification, supporting system reliability in replacement scenarios.

Frequently Asked Questions (FAQ)

Q: Can the DRA1-CMX60D5 directly replace the MS11-DMP6301A in existing applications?

A: Yes. The DRA1-CMX60D5 meets all critical electrical parameters: it accepts the 5VDC input requirement, supports the 3 to 60VDC output voltage range, and provides 5A current capacity exceeding the original 3A specification. Both components use DIN Rail Mount configuration.

Q: What is the primary difference between these two parts?

A: The MS11-DMP6301A is a DC Output Module with 3A capacity and obsolete status. The DRA1-CMX60D5 is an active SSR Relay SPST-NO module with 5A capacity. Both function as switching modules for DC applications within the specified voltage and current parameters.

Q: Are there compliance or certification differences?

A: Both parts maintain identical REACH and ECCN classifications (REACH Unaffected, EAR99). No compliance barriers exist for substitution.

Q: What packaging considerations apply?

A: The MS11-DMP6301A uses standard DIN Rail Mount packaging. The DRA1-CMX60D5 is supplied in Bulk packaging with DIN Rail Mount configuration, maintaining mechanical compatibility.

Q: Is the increased 5A current rating of the DRA1-CMX60D5 a concern for 3A applications?

A: No. Higher current capacity does not create compatibility issues for lower-current applications. The 5A rating provides operational margin and supports potential future load increases within the voltage specifications.