MR5360 LED Yellow Diffused T-1 Equivalent & Substitute Parts

Part Overview

The MR5360 is a yellow diffused T-1 through-hole LED manufactured by onsemi, designed for 5V indication applications with a 4mcd brightness rating and 60° viewing angle. The part is classified as obsolete, making equivalent substitutes necessary for new designs and ongoing production requirements. This reference provides qualified alternatives that maintain functional compatibility within specified electrical and mechanical parameters.

Key Parameters

Parameter	MR5360 Specification
Manufacturer	onsemi
Color	Yellow
Lens Transparency	Diffused
Lens Size	3mm, T-1
Voltage - Forward (Vf) (Typ)	5V
Current - Test	10mA
Millicandela Rating	4mcd
Viewing Angle	60°
Mounting Type	Through Hole, Right Angle
Wavelength - Peak	583nm
Height (Max)	7.37mm
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria applied strictly to the provided parameters:

Primary Compatibility Criteria:

Color: Yellow
Lens Transparency: Diffused
Lens Size: 3mm, T-1 form factor
Mounting Type: Through Hole
Wavelength range: 583–591nm (peak)

Voltage and Current Considerations: The MR5360 operates at 5V forward voltage with 10mA test current. Substitutes are grouped into two categories:

Direct 5V Equivalents – Parts with 5V forward voltage and 10mA test current, maintaining identical electrical operating conditions
Lower Voltage Alternatives – Parts with 2V forward voltage and 20mA test current, requiring circuit redesign but offering functional yellow LED indication

Brightness Tolerance: The MR5360 specifies 4mcd. Substitutes range from 2.1mcd to 200mcd. Selection depends on application brightness requirements.

Product Status Consideration: Active status substitutes are preferred for new designs. Obsolete parts should not be selected for production applications.

Parameter Comparison

Part Number	Manufacturer	Color	Vf (Typ)	Current - Test	mcd	Viewing Angle	Wavelength - Peak	Height (Max)	Product Status	RoHS Status
MR5360	onsemi	Yellow	5V	10mA	4	60°	583nm	7.37mm	Obsolete	Non-compliant
HLMP-1620	Broadcom Limited	Yellow	5V	10mA	2.2	60°	583nm	6.35mm	Active	ROHS3 Compliant
HLMP-1620-C00A1	Broadcom Limited	Yellow	5V	10mA	2.2	60°	583nm	—	Active	ROHS3 Compliant
HLMP-1620-C00A2	Broadcom Limited	Yellow	5V	10mA	2.2	60°	583nm	—	Active	ROHS3 Compliant
HLMP-1621	Broadcom Limited	Yellow	12V	13mA	2.2	60°	583nm	6.35mm	Active	ROHS3 Compliant
HLMP-1719	Broadcom Limited	Yellow	1.8V	2mA	2.1	50°	—	6.35mm	Active	ROHS3 Compliant
HLMP-1719-A0002	Broadcom Limited	Yellow	1.8V	2mA	2.1	50°	—	6.35mm	Active	ROHS3 Compliant
3YD-F	Bivar Inc.	Yellow	2V	20mA	20	35°	590nm	5.30mm	Active	ROHS3 Compliant
1254-10UYD/S530-A3	Everlight Electronics Co Ltd	Yellow	2V	20mA	200	30°	591nm	5.20mm	Active	ROHS3 Compliant
264-7UYD/S530-A3	Everlight Electronics Co Ltd	Yellow	2V	20mA	125	60°	591nm	6.20mm	Active	ROHS3 Compliant
414-10UYD/S530-A3	Everlight Electronics Co Ltd	Yellow	2V	20mA	40	120°	591nm	7.00mm	Active	—

Engineering Selection Recommendations

For Direct Electrical Compatibility (5V, 10mA Operation):

HLMP-1620, HLMP-1620-C00A1, and HLMP-1620-C00A2 are direct electrical equivalents to the MR5360. All three are manufactured by Broadcom Limited, maintain 5V forward voltage and 10mA test current, and are ROHS3 compliant. HLMP-1620-C00A1 and HLMP-1620-C00A2 include right-angle mounting, matching the MR5360 mounting configuration. These parts are active products with full availability and are suitable for new production designs.

For Alternative Voltage Systems:

HLMP-1621 operates at 12V with 13mA test current and maintains the same yellow diffused T-1 form factor. This part is appropriate only for 12V circuit designs and requires circuit modification from the original 5V specification.

HLMP-1719 and HLMP-1719-A0002 operate at 1.8V with 2mA test current. These are suitable for low-voltage applications but require complete circuit redesign and are not compatible with 5V systems.

For Lower Voltage Applications (2V, 20mA Operation):

3YD-F (Bivar Inc.), 1254-10UYD/S530-A3, 264-7UYD/S530-A3, and 414-10UYD/S530-A3 (Everlight Electronics) all operate at 2V with 20mA test current. These require circuit modification and are suitable only for applications designed for 2V LED operation. All are ROHS3 compliant and active products.

Compliance Consideration:

The MR5360 is RoHS non-compliant. All listed substitutes are ROHS3 compliant, meeting current regulatory requirements for new designs and production.

Frequently Asked Questions (FAQ)

Q: Can HLMP-1620 replace MR5360 in existing 5V circuits without modification?

A: Yes. HLMP-1620 maintains identical 5V forward voltage and 10mA test current specifications. No circuit modification is required. The primary difference is lower brightness (2.2mcd vs. 4mcd), which is acceptable for standard indication applications.

Q: What is the difference between HLMP-1620, HLMP-1620-C00A1, and HLMP-1620-C00A2?

A: All three share identical electrical specifications (5V, 10mA, 2.2mcd, 60° viewing angle, 583nm peak wavelength). HLMP-1620-C00A1 and HLMP-1620-C00A2 include right-angle mounting, matching the MR5360 configuration. HLMP-1620 uses standard through-hole mounting. Selection depends on PCB layout requirements.

Q: Can 2V LED substitutes be used in a 5V circuit?

A: No. 2V LEDs (3YD-F, Everlight parts) require complete circuit redesign including current-limiting resistor recalculation. Direct substitution in 5V circuits will cause LED failure.

Q: Why is the MR5360 listed as obsolete?

A: Obsolete status indicates the part is no longer manufactured by onsemi and existing inventory is limited. Active substitutes should be selected for new production designs to ensure long-term supply availability.

Q: What is the brightness difference between MR5360 and available substitutes?

A: MR5360 specifies 4mcd. Direct 5V equivalents (HLMP series) provide 2.1–2.2mcd. Lower voltage alternatives range from 20mcd to 200mcd depending on the specific part. Application brightness requirements determine appropriate selection.

Q: Are all listed substitutes RoHS compliant?

A: Yes. All substitute parts listed are ROHS3 compliant. The original MR5360 is RoHS non-compliant, making compliant substitutes necessary for current regulatory requirements.

Q: What is the viewing angle impact when selecting substitutes?

A: MR5360 specifies 60° viewing angle. HLMP-1620 series maintains 60°. Lower voltage alternatives vary: 3YD-F (35°), 1254-10UYD/S530-A3 (30°), 264-7UYD/S530-A3 (60°), 414-10UYD/S530-A3 (120°). Application visibility requirements determine appropriate selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message