MR30509MP6 Equivalent & Substitute Parts

Part Overview

The MR30509MP6 is a Circuit Board Indicator LED manufactured by onsemi, featuring a single red diffused lens in a 5mm T-1 3/4 through-hole right-angle package. This component is designed for 5V applications with a 13mA operating current and 2mcd brightness rating. The part is currently obsolete, making identification of functionally equivalent alternatives essential for ongoing system support, maintenance, and new design implementations where this specific model is no longer available from primary sources.

Substiute Parts

MR30509MP6

onsemiIn Stock: 892MR30509MP6 Datasheet

Current PartRFQ

HLMP-4700-C00B2

Broadcom LimitedIn Stock: 2092HLMP-4700-C00B2 Datasheet

SimilarRFQ

HLMP-D150-C00B2

Broadcom LimitedIn Stock: 2902HLMP-D150-C00B2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MR30509MP6 are identified based on the following critical parameters that determine functional equivalence:

• Color: Red (all substitutes match)
• Configuration: Single LED (all substitutes match)
• Lens Type: Diffused, Tinted (all substitutes match)
• Mounting Type: Through Hole, Right Angle (all substitutes match)
• Lens Size: 5mm, T-1 3/4 (primary mechanical compatibility requirement)

The substitute parts listed below maintain mechanical compatibility through identical mounting type and lens form factor. Electrical parameters (voltage, current, brightness) vary between candidates, requiring circuit-level evaluation for specific application requirements. All substitutes are manufactured by Broadcom Limited and carry active product status with modern compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

HLMP-D150-C00B2 provides the closest mechanical and optical match to the MR30509MP6, maintaining identical lens size (5mm T-1 3/4), lens style (round with domed top), and mounting configuration (through-hole right-angle). This part carries active product status and ROHS3 compliance. Circuit redesign is required due to significantly lower voltage (1.6V vs. 5V) and current (1mA vs. 13mA) ratings.

HLMP-4700-C00B2 offers an alternative with active product status and ROHS3 compliance. While maintaining the through-hole right-angle mounting type and red diffused lens characteristics, this part lacks specified lens size and style data. Electrical parameters differ substantially (1.7V, 2mA vs. 5V, 13mA), necessitating circuit-level modifications.

Both substitutes are manufactured by Broadcom Limited with active product status and modern compliance certifications, addressing the obsolescence of the original onsemi component. Selection between these options depends on specific circuit voltage and current requirements, as well as mechanical space constraints related to lens form factor specifications.

Frequently Asked Questions (FAQ)

Q: Can HLMP-D150-C00B2 be used as a direct drop-in replacement for MR30509MP6?

A: Mechanical compatibility is confirmed through identical lens size (5mm T-1 3/4), lens style (round with domed top), and mounting type (through-hole right-angle). Electrical parameters differ significantly; circuit redesign is required to accommodate 1.6V operation and 1mA current versus the original 5V and 13mA specifications.

Q: What are the key differences between HLMP-D150-C00B2 and HLMP-4700-C00B2?

A: HLMP-D150-C00B2 specifies lens size (5mm T-1 3/4) and lens style (round with domed top), matching the original MR30509MP6 form factor. HLMP-4700-C00B2 does not provide lens size or style specifications. Both operate at lower voltage and current levels than the original part.

Q: Are both substitute parts RoHS compliant?

A: Yes. Both HLMP-D150-C00B2 and HLMP-4700-C00B2 carry ROHS3 compliance certification, whereas the original MR30509MP6 is RoHS non-compliant.

Q: Which substitute part has higher brightness output?

A: HLMP-D150-C00B2 provides 3mcd brightness, compared to 2.3mcd for HLMP-4700-C00B2 and 2mcd for the original MR30509MP6.

Q: What is the primary consideration when selecting between these substitutes?

A: Circuit voltage and current requirements are the primary selection criteria. The original MR30509MP6 operates at 5V with 13mA current. Both substitutes operate at approximately 1.6–1.7V with 1–2mA current, requiring significant circuit modifications. Additionally, HLMP-D150-C00B2 provides complete lens specification data matching the original form factor.