MPX10GS Equivalent & Substitute Parts

Part Overview

The MPX10GS is a vented gauge pressure sensor manufactured by NXP USA Inc., designed for board mount applications requiring low-pressure measurement up to 1.45 PSI (10 kPa). This component features a Wheatstone Bridge output with a 0 mV to 35 mV signal range at 3V supply, utilizing a barbed male port (0.19" / 4.93mm tube) for pneumatic connection.

The MPX10GS is classified as obsolete. Locating equivalent substitute parts is necessary to support legacy system maintenance, design updates, and continued production of equipment utilizing this sensor architecture.

Substiute Parts

MPX10GS

NXP USA Inc.In Stock: 830MPX10GS Datasheet

Current PartRFQ

MPX10GP

NXP USA Inc.In Stock: 2109MPX10GP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MPX10GS is determined by strict equivalence across the following critical parameters:

• Operating pressure specification: 1.45 PSI (10 kPa)
• Maximum pressure rating: 10.88 PSI (75 kPa)
• Pressure measurement type: Vented gauge
• Output signal architecture: Wheatstone Bridge
• Output voltage range: 0 mV ~ 35 mV at 3V supply
• Supply voltage range: 3V ~ 6V
• Pneumatic port configuration: Male barbed, 0.19" (4.93mm) tube
• Electrical termination: PC Pin through-hole mounting
• Package form factor: 4-SIP Module
• Temperature operating range: -40°C ~ 125°C

The MPX10GP is a direct equivalent within the MPX10 series, sharing identical pressure specifications, output characteristics, electrical interface, and mechanical form factor. The primary distinction is product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

The MPX10GP is the manufacturer-recommended substitute for the obsolete MPX10GS. Both components maintain identical electrical and mechanical specifications, ensuring direct functional compatibility in existing circuit designs and mechanical assemblies.

The MPX10GP carries active product status with current manufacturing support and documented availability. Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for new designs and legacy system updates.

The MPX10GP provides specified accuracy of ±1%, whereas the MPX10GS accuracy specification is not provided in available documentation. This represents an enhancement in measurement precision for applications requiring quantified sensor performance.

Frequently Asked Questions (FAQ)

Q: Can the MPX10GP directly replace the MPX10GS in existing assemblies?

A: Yes. The MPX10GP is electrically and mechanically equivalent to the MPX10GS. Identical pressure ratings, output characteristics, supply voltage range, port configuration, and through-hole PC pin termination ensure direct substitution without circuit or mechanical redesign.

Q: What is the primary reason for substitution?

A: The MPX10GS is classified as obsolete. The MPX10GP is the active equivalent within the MPX10 series, offering continued manufacturing support and documented availability.

Q: Are there packaging differences between these parts?

A: The MPX10GS is supplied in standard packaging, while the MPX10GP is supplied in tray packaging. Both utilize the identical 4-SIP Module form factor. Tray packaging is standard for active production components and does not affect electrical or mechanical performance.

Q: Do both parts meet current regulatory standards?

A: Yes. Both the MPX10GS and MPX10GP are ROHS3 compliant and REACH unaffected, satisfying current regulatory requirements for electronic component manufacturing and use.

Q: Is accuracy specification a critical factor in substitution?

A: The MPX10GP specifies ±1% accuracy, while the MPX10GS accuracy is not documented. For applications where measurement precision is critical, the MPX10GP provides quantified performance. For legacy system maintenance where original accuracy was not specified, both parts are functionally equivalent.